Use the Maple Tree iterator instead. This is too complicated for the VMA
iterator to handle, so let's open-code it for now. If this turns out to
be a common pattern, we can migrate it to common code.
Use the VMA iterator instead. This requires a little restructuring of the
surrounding code to hoist the mm to the caller. That turns
cxl_prefault_one() into a trivial function, so call cxl_fault_segment()
directly.
Use the VMA iterator instead. Since VMA can no longer be NULL in the
loop, then deal with out-of-memory outside the loop. This means a
slightly longer run time in the failure case (-ENOMEM) - it will run to
the end of the VMAs before erroring instead of in the middle of the loop.
mm/mmap: change do_brk_munmap() to use do_mas_align_munmap()
do_brk_munmap() has already aligned the address and has a maple tree state
to be used. Use the new do_mas_align_munmap() to avoid unnecessary
alignment and error checks.
Remove __do_munmap() in favour of do_munmap(), do_mas_munmap(), and
do_mas_align_munmap().
do_munmap() is a wrapper to create a maple state for any callers that have
not been converted to the maple tree.
do_mas_munmap() takes a maple state to mumap a range. This is just a
small function which checks for error conditions and aligns the end of the
range.
do_mas_align_munmap() uses the aligned range to mumap a range.
do_mas_align_munmap() starts with the first VMA in the range, then finds
the last VMA in the range. Both start and end are split if necessary.
Then the VMAs are removed from the linked list and the mm mlock count is
updated at the same time. Followed by a single tree operation of
overwriting the area in with a NULL. Finally, the detached list is
unmapped and freed.
By reorganizing the munmap calls as outlined, it is now possible to avoid
extra work of aligning pre-aligned callers which are known to be safe,
avoid extra VMA lookups or tree walks for modifications.
detach_vmas_to_be_unmapped() is no longer used, so drop this code.
vm_brk_flags() can just call the do_mas_munmap() as it checks for
intersecting VMAs directly.
By using the maple tree and the maple tree state, the vmacache is no
longer beneficial and is complicating the VMA code. Remove the vmacache
to reduce the work in keeping it up to date and code complexity.
mm/mmap: use advanced maple tree API for mmap_region()
Changing mmap_region() to use the maple tree state and the advanced maple
tree interface allows for a lot less tree walking.
This change removes the last caller of munmap_vma_range(), so drop this
unused function.
Add vma_expand() to expand a VMA if possible by doing the necessary
hugepage check, uprobe_munmap of files, dcache flush, modifications then
undoing the detaches, etc.
mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()
Avoid allocating a new VMA when it a vma modification can occur. When a
brk() can expand or contract a VMA, then the single store operation will
only modify one index of the maple tree instead of causing a node to split
or coalesce. This avoids unnecessary allocations/frees of maple tree
nodes and VMAs.
Move some limit & flag verifications out of the do_brk_flags() function to
use only relevant checks in the code path of bkr() and vm_brk_flags().
Set the vma to check if it can expand in vm_brk_flags() if extra criteria
are met.
Drop userfaultfd from do_brk_flags() path and only use it in
vm_brk_flags() path since that is the only place a munmap will happen.
Add a wraper for munmap for the brk case called do_brk_munmap().
mm/khugepaged: optimize collapse_pte_mapped_thp() by using vma_lookup()
vma_lookup() will walk the vma tree once and not continue to look for the
next vma. Since the exact vma is checked below, this is a more optimal
way of searching.
Use vma_lookup() to walk the tree to the start value requested. If the
vma at the start does not match, then the answer is NULL and there is no
need to look at the next vma the way that find_vma() would.
vma_lookup() walks the VMA tree for a specific value, find_vma() will
search the tree after walking to a specific value. It is more efficient
to only walk to the requested value since privcmd_ioctl_mmap() will exit
the loop if vm_start != msg->va.
mmap: change zeroing of maple tree in __vma_adjust()
Only write to the maple tree if we are not inserting or the insert isn't
going to overwrite the area to clear. This avoids spanning writes and
node coealescing when unnecessary.
The change requires a custom search for the linked list addition to find
the correct VMA for the prev link.
damon: convert __damon_va_three_regions to use the VMA iterator
This rather specialised walk can use the VMA iterator. If this proves to
be too slow, we can write a custom routine to find the two largest gaps,
but it will be somewhat complicated, so let's see if we need it first.
Update the kunit test case to use the maple tree. This also fixes an
issue with the kunit testcase not adding the last VMA to the list.
Link: https://lkml.kernel.org/r/20220504011215.661968-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20220621204632.3370049-16-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20220720021727.17018-16-Liam.Howlett@oracle.com Fixes: 17ccae8bb5c9 (mm/damon: add kunit tests) Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: SeongJae Park <sj@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Howells <dhowells@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hulk Robot <hulkci@huawei.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kernel/fork: use maple tree for dup_mmap() during forking
The maple tree was already tracking VMAs in this function by an earlier
commit, but the rbtree iterator was being used to iterate the list.
Change the iterator to use a maple tree native iterator and switch to the
maple tree advanced API to avoid multiple walks of the tree during insert
operations. Unexport the now-unused vma_store() function.
For performance reasons we bulk allocate the maple tree nodes. The node
calculations are done internally to the tree and use the VMA count and
assume the worst-case node requirements. The VM_DONT_COPY flag does not
allow for the most efficient copy method of the tree and so a bulk loading
algorithm is used.
mm/mmap: use maple tree for unmapped_area{_topdown}
The maple tree code was added to find the unmapped area in a previous
commit and was checked against what the rbtree returned, but the actual
result was never used. Start using the maple tree implementation and
remove the rbtree code.
Add kernel documentation comment for these functions.
mm/mmap: use the maple tree for find_vma_prev() instead of the rbtree
Use the maple tree's advanced API and a maple state to walk the tree for
the entry at the address of the next vma, then use the maple state to walk
back one entry to find the previous entry.
This thin layer of abstraction over the maple tree state is for iterating
over VMAs. You can go forwards, go backwards or ask where the iterator
is. Rename the existing vma_next() to __vma_next() -- it will be removed
by the end of this series.
Start tracking the VMAs with the new maple tree structure in parallel with
the rb_tree. Add debug and trace events for maple tree operations and
duplicate the rb_tree that is created on forks into the maple tree.
The maple tree is added to the mm_struct including the mm_init struct,
added support in required mm/mmap functions, added tracking in kernel/fork
for process forking, and used to find the unmapped_area and checked
against what the rbtree finds.
This also moves the mmap_lock() in exit_mmap() since the oom reaper call
does walk the VMAs. Otherwise lockdep will be unhappy if oom happens.
When splitting a vma fails due to allocations of the maple tree nodes,
the error path in __split_vma() calls new->vm_ops->close(new). The page
accounting for hugetlb is actually in the close() operation, so it
accounts for the removal of 1/2 of the VMA which was not adjusted. This
results in a negative exit value. To avoid the negative charge, set
vm_start = vm_end and vm_pgoff = 0.
There is also a potential accounting issue in special mappings from
insert_vm_struct() failing to allocate, so reverse the charge there in
the failure scenario.
radix tree test suite: add allocation counts and size to kmem_cache
Add functions to get the number of allocations, and total allocations from
a kmem_cache. Also add a function to get the allocated size and a way to
zero the total allocations.
radix tree test suite: add kmem_cache_set_non_kernel()
kmem_cache_set_non_kernel() is a mechanism to allow a certain number of
kmem_cache_alloc requests to succeed even when GFP_KERNEL is not set in
the flags. This functionality allows for testing different paths though
the code.
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
Davidlor said
: Yes I like the maple tree, and at this stage I don't think we can ask for
: more from this series wrt the MM - albeit there seems to still be some
: folks reporting breakage. Fundamentally I see Liam's work to (re)move
: complexity out of the MM (not to say that the actual maple tree is not
: complex) by consolidating the three complimentary data structures very
: much worth it considering performance does not take a hit. This was very
: much a turn off with the range locking approach, which worst case scenario
: incurred in prohibitive overhead. Also as Liam and Matthew have
: mentioned, RCU opens up a lot of nice performance opportunities, and in
: addition academia[1] has shown outstanding scalability of address spaces
: with the foundation of replacing the locked rbtree with RCU aware trees.
A similar work has been discovered in the academic press
Sheer coincidence. We designed our tree with the intention of solving the
hardest problem first. Upon settling on a b-tree variant and a rough
outline, we researched ranged based b-trees and RCU b-trees and did find
that article. So it was nice to find reassurances that we were on the
right path, but our design choice of using ranges made that paper unusable
for us.
This patch (of 69):
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
Liam Howlett [Mon, 27 Jun 2022 15:18:59 +0000 (15:18 +0000)]
android: binder: fix lockdep check on clearing vma
When munmapping a vma, the mmap_lock can be degraded to a write before
calling close() on the file handle. The binder close() function calls
binder_alloc_set_vma() to clear the vma address, which now has a lock dep
check for writing on the mmap_lock. Change the lockdep check to ensure
the reading lock is held while clearing and keep the write check while
writing.
Link: https://lkml.kernel.org/r/20220627151857.2316964-1-Liam.Howlett@oracle.com Fixes: 472a68df605b ("android: binder: stop saving a pointer to the VMA") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: syzbot+da54fa8d793ca89c741f@syzkaller.appspotmail.com Acked-by: Todd Kjos <tkjos@google.com> Cc: "Arve Hjønnevåg" <arve@android.com> Cc: Christian Brauner (Microsoft) <brauner@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Martijn Coenen <maco@android.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drivers/android/binder_alloc_selftest.c: In function 'binder_selftest_alloc':
drivers/android/binder_alloc_selftest.c:290:43: error: 'struct binder_alloc' has no member named 'vma'
290 | if (!binder_selftest_run || !alloc->vma)
Cc: Christian Brauner (Microsoft) <brauner@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Martijn Coenen <maco@android.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Todd Kjos <tkjos@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam R. Howlett [Tue, 21 Jun 2022 01:09:09 +0000 (21:09 -0400)]
android: binder: stop saving a pointer to the VMA
Do not record a pointer to a VMA outside of the mmap_lock for later use.
This is unsafe and there are a number of failure paths *after* the
recorded VMA pointer may be freed during setup. There is no callback to
the driver to clear the saved pointer from generic mm code. Furthermore,
the VMA pointer may become stale if any number of VMA operations end up
freeing the VMA so saving it was fragile to being with.
Instead, change the binder_alloc struct to record the start address of the
VMA and use vma_lookup() to get the vma when needed. Add lockdep
mmap_lock checks on updates to the vma pointer to ensure the lock is held
and depend on that lock for synchronization of readers and writers - which
was already the case anyways, so the smp_wmb()/smp_rmb() was not
necessary.
Link: https://lkml.kernel.org/r/20220621140212.vpkio64idahetbyf@revolver Fixes: da1b9564e85b ("android: binder: fix the race mmap and alloc_new_buf_locked") Reported-by: syzbot+58b51ac2b04e388ab7b0@syzkaller.appspotmail.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Christian Brauner (Microsoft) <brauner@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Martijn Coenen <maco@android.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Todd Kjos <tkjos@android.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__GFP_ATOMIC serves little purpose. Its main effect is to set
ALLOC_HARDER which adds a few little boosts to increase the chance of an
allocation succeeding, one of which is to lower the water-mark at which it
will succeed.
It is *always* paired with __GFP_HIGH which sets ALLOC_HIGH which also
adjusts this watermark. It is probable that other users of __GFP_HIGH
should benefit from the other little bonuses that __GFP_ATOMIC gets.
__GFP_ATOMIC also gives a warning if used with __GFP_DIRECT_RECLAIM.
There is little point to this. We already get a might_sleep() warning if
__GFP_DIRECT_RECLAIM is set.
__GFP_ATOMIC allows the "watermark_boost" to be side-stepped. It is
probable that testing ALLOC_HARDER is a better fit here.
__GFP_ATOMIC is used by tegra-smmu.c to check if the allocation might
sleep. This should test __GFP_DIRECT_RECLAIM instead.
This patch:
- removes __GFP_ATOMIC
- causes __GFP_HIGH to set ALLOC_HARDER unless __GFP_NOMEMALLOC is set
(as well as ALLOC_HIGH).
- makes other adjustments as suggested by the above.
The net result is not change to GFP_ATOMIC allocations. Other
allocations that use __GFP_HIGH will benefit from a few different extra
privileges. This affects:
xen, dm, md, ntfs3
the vermillion frame buffer
hibernation
ksm
swap
all of which likely produce more benefit than cost if these selected
allocation are more likely to succeed quickly.
Link: https://lkml.kernel.org/r/163712397076.13692.4727608274002939094@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is a discussion about the name of hugetlb_vmemmap_alloc/free in
thread [1]. The suggestion suggested by David is rename "alloc/free" to
"optimize/restore" to make functionalities clearer to users, "optimize"
means the function will optimize vmemmap pages, while "restore" means
restoring its vmemmap pages discared before. This commit does this.
Another discussion is the confusion RESERVE_VMEMMAP_NR isn't used
explicitly for vmemmap_addr but implicitly for vmemmap_end in
hugetlb_vmemmap_alloc/free. David suggested we can compute what
hugetlb_vmemmap_init() does now at runtime. We do not need to worry for
the overhead of computing at runtime since the calculation is simple
enough and those functions are not in a hot path. This commit has the
following improvements:
1) The function suffixed name ("optimize/restore") is more expressive.
2) The logic becomes less weird in hugetlb_vmemmap_optimize/restore().
3) The hugetlb_vmemmap_init() does not need to be exported anymore.
4) A ->optimize_vmemmap_pages field in struct hstate is killed.
5) There is only one place where checks is_power_of_2(sizeof(struct
page)) instead of two places.
6) Add more comments for hugetlb_vmemmap_optimize/restore().
7) For external users, hugetlb_optimize_vmemmap_pages() is used for
detecting if the HugeTLB's vmemmap pages is optimizable originally.
In this commit, it is killed and we introduce a new helper
hugetlb_vmemmap_optimizable() to replace it. The name is more
expressive.
Link: https://lore.kernel.org/all/20220404074652.68024-2-songmuchun@bytedance.com/ Link: https://lkml.kernel.org/r/20220628092235.91270-7-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Will Deacon <will@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is no order requirement between the parameter of
"hugetlb_free_vmemmap" and "hugepages" since we have removed the check of
whether HVO is enabled from hugetlb_vmemmap_init(). Therefore we can
safely replace early_param() with core_param() to simplify the code.
Link: https://lkml.kernel.org/r/20220628092235.91270-6-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Will Deacon <will@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muchun Song [Tue, 28 Jun 2022 09:22:31 +0000 (17:22 +0800)]
mm: hugetlb_vmemmap: move vmemmap code related to HugeTLB to hugetlb_vmemmap.c
When I first introduced vmemmap manipulation functions related to HugeTLB,
I thought those functions may be reused by other modules (e.g. using
similar approach to optimize vmemmap pages, unfortunately, the DAX used
the same approach but does not use those functions). After two years, we
didn't see any other users. So move those functions to hugetlb_vmemmap.c.
Code movement without any functional change.
Link: https://lkml.kernel.org/r/20220628092235.91270-5-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Will Deacon <will@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muchun Song [Tue, 28 Jun 2022 09:22:30 +0000 (17:22 +0800)]
mm: hugetlb_vmemmap: introduce the name HVO
It it inconvenient to mention the feature of optimizing vmemmap pages
associated with HugeTLB pages when communicating with others since there
is no specific or abbreviated name for it when it is first introduced.
Let us give it a name HVO (HugeTLB Vmemmap Optimization) from now.
This commit also updates the document about "hugetlb_free_vmemmap" by the
way discussed in thread [1].
Link: https://lore.kernel.org/all/21aae898-d54d-cc4b-a11f-1bb7fddcfffa@redhat.com/ Link: https://lkml.kernel.org/r/20220628092235.91270-4-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Will Deacon <will@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We hold an another reference to hugetlb_optimize_vmemmap_key when making
vmemmap_optimize_mode on, because we use static_key to tell memory_hotplug
that memory_hotplug.memmap_on_memory should be overridden. However, this
rule has gone when we have introduced PageVmemmapSelfHosted. Therefore,
we could simplify vmemmap_optimize_mode handling by not holding an another
reference to hugetlb_optimize_vmemmap_key. This also means that we not
incur the extra page_fixed_fake_head checks if there are no vmemmap
optinmized hugetlb pages after this change.
Link: https://lkml.kernel.org/r/20220628092235.91270-3-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Will Deacon <will@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Simplify hugetlb vmemmap and improve its readability", v2.
This series aims to simplify hugetlb vmemmap and improve its readability.
This patch (of 8):
The name hugetlb_optimize_vmemmap_enabled() a bit confusing as it tests
two conditions (enabled and pages in use). Instead of coming up to an
appropriate name, we could just delete it. There is already a discussion
about deleting it in thread [1].
There is only one user of hugetlb_optimize_vmemmap_enabled() outside of
hugetlb_vmemmap, that is flush_dcache_page() in arch/arm64/mm/flush.c.
However, it does not need to call hugetlb_optimize_vmemmap_enabled() in
flush_dcache_page() since HugeTLB pages are always fully mapped and only
head page will be set PG_dcache_clean meaning only head page's flag may
need to be cleared (see commit cf5a501d985b). So it is easy to remove
hugetlb_optimize_vmemmap_enabled().
Link: https://lore.kernel.org/all/c77c61c8-8a5a-87e8-db89-d04d8aaab4cc@oracle.com/ Link: https://lkml.kernel.org/r/20220628092235.91270-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
syzbot is reporting double kfree() at free_prealloced_shrinker() [1], for
destroy_unused_super() calls free_prealloced_shrinker() even if
prealloc_shrinker() returned an error. Explicitly clear shrinker name
when prealloc_shrinker() called kfree().
I've been in Alibaba Cloud for more than one year, mainly to address
cloud-native challenges (such as high-performance container images) for
open source communities.
Update my email addresses on behalf of my current employer (Alibaba Cloud)
to support all my (team) work in this area. Also add an outdated
@redhat.com address of me.
Nadav Amit [Mon, 11 Jul 2022 16:59:06 +0000 (09:59 -0700)]
userfaultfd: provide properly masked address for huge-pages
Commit 824ddc601adc ("userfaultfd: provide unmasked address on
page-fault") was introduced to fix an old bug, in which the offset in the
address of a page-fault was masked. Concerns were raised - although were
never backed by actual code - that some userspace code might break because
the bug has been around for quite a while. To address these concerns a
new flag was introduced, and only when this flag is set by the user,
userfaultfd provides the exact address of the page-fault.
The commit however had a bug, and if the flag is unset, the offset was
always masked based on a base-page granularity. Yet, for huge-pages, the
behavior prior to the commit was that the address is masked to the
huge-page granulrity.
While there are no reports on real breakage, fix this issue. If the flag
is unset, use the address with the masking that was done before.
Link: https://lkml.kernel.org/r/20220711165906.2682-1-namit@vmware.com Fixes: 824ddc601adc ("userfaultfd: provide unmasked address on page-fault") Signed-off-by: Nadav Amit <namit@vmware.com> Reported-by: James Houghton <jthoughton@google.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: James Houghton <jthoughton@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Tue, 12 Jul 2022 13:05:42 +0000 (21:05 +0800)]
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page
cache are installed in the ptes. But hugepage_add_new_anon_rmap is called
for them mistakenly because they're not vm_shared. This will corrupt the
page->mapping used by page cache code.
Link: https://lkml.kernel.org/r/20220712130542.18836-1-linmiaohe@huawei.com Fixes: f619147104c8 ("userfaultfd: add UFFDIO_CONTINUE ioctl") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit introduced a regression that can cause mount hung. The
changes in __ocfs2_find_empty_slot causes that any node with none-zero
node number can grab the slot that was already taken by node 0, so node 1
will access the same journal with node 0, when it try to grab journal
cluster lock, it will hung because it was already acquired by node 0.
It's very easy to reproduce this, in one cluster, mount node 0 first, then
node 1, you will see the following call trace from node 1.
To fix it, we can just fix __ocfs2_find_empty_slot. But original commit
introduced the feature to mount ocfs2 locally even it is cluster based,
that is a very dangerous, it can easily cause serious data corruption,
there is no way to stop other nodes mounting the fs and corrupting it.
Setup ha or other cluster-aware stack is just the cost that we have to
take for avoiding corruption, otherwise we have to do it in kernel.
Link: https://lkml.kernel.org/r/20220603222801.42488-1-junxiao.bi@oracle.com Fixes: 912f655d78c5("ocfs2: mount shared volume without ha stack") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <heming.zhao@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
==================================================================
BUG: KASAN: use-after-free in ntfs_ucsncmp+0x123/0x130
Read of size 2 at addr ffff8880751acee8 by task a.out/879
Eric Biggers suggested that this happens when
secretmem_setattr()->simple_setattr() races with secretmem_fault() so that
a page that is faulted in by secretmem_fault() (and thus removed from the
direct map) is zeroed by inode truncation right afterwards.
Use mapping->invalidate_lock to make secretmem_fault() and
secretmem_setattr() mutually exclusive.
[rppt@linux.ibm.com: v3] Link: https://lkml.kernel.org/r/20220714091337.412297-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20220707165650.248088-1-rppt@kernel.org Reported-by: syzbot+9bd2b7adbd34b30b87e4@syzkaller.appspotmail.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Eric Biggers <ebiggers@kernel.org> Reviewed-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/hugetlb: separate path for hwpoison entry in copy_hugetlb_page_range()
Originally copy_hugetlb_page_range() handles migration entries and
hwpoisoned entries in similar manner. But recently the related code path
has more code for migration entries, and when
is_writable_migration_entry() was converted to
!is_readable_migration_entry(), hwpoison entries on source processes got
to be unexpectedly updated (which is legitimate for migration entries, but
not for hwpoison entries). This results in unexpected serious issues like
kernel panic when forking processes with hwpoison entries in pmd.
Separate the if branch into one for hwpoison entries and one for migration
entries.
Link: https://lkml.kernel.org/r/20220704013312.2415700-3-naoya.horiguchi@linux.dev Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> [5.18] Cc: David Hildenbrand <david@redhat.com> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muchun Song [Tue, 5 Jul 2022 12:35:32 +0000 (20:35 +0800)]
mm: fix missing wake-up event for FSDAX pages
FSDAX page refcounts are 1-based, rather than 0-based: if refcount is
1, then the page is freed. The FSDAX pages can be pinned through GUP,
then they will be unpinned via unpin_user_page() using a folio variant
to put the page, however, folio variants did not consider this special
case, the result will be to miss a wakeup event (like the user of
__fuse_dax_break_layouts()). This results in a task being permanently
stuck in TASK_INTERRUPTIBLE state.
Since FSDAX pages are only possibly obtained by GUP users, so fix GUP
instead of folio_put() to lower overhead.
Link: https://lkml.kernel.org/r/20220705123532.283-1-songmuchun@bytedance.com Fixes: d8ddc099c6b3 ("mm/gup: Add gup_put_folio()") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Josef Bacik [Tue, 5 Jul 2022 20:00:36 +0000 (16:00 -0400)]
mm: fix page leak with multiple threads mapping the same page
We have an application with a lot of threads that use a shared mmap backed
by tmpfs mounted with -o huge=within_size. This application started
leaking loads of huge pages when we upgraded to a recent kernel.
Using the page ref tracepoints and a BPF program written by Tejun Heo we
were able to determine that these pages would have multiple refcounts from
the page fault path, but when it came to unmap time we wouldn't drop the
number of refs we had added from the faults.
I wrote a reproducer that mmap'ed a file backed by tmpfs with -o
huge=always, and then spawned 20 threads all looping faulting random
offsets in this map, while using madvise(MADV_DONTNEED) randomly for huge
page aligned ranges. This very quickly reproduced the problem.
The problem here is that we check for the case that we have multiple
threads faulting in a range that was previously unmapped. One thread maps
the PMD, the other thread loses the race and then returns 0. However at
this point we already have the page, and we are no longer putting this
page into the processes address space, and so we leak the page. We
actually did the correct thing prior to f9ce0be71d1f, however it looks
like Kirill copied what we do in the anonymous page case. In the
anonymous page case we don't yet have a page, so we don't have to drop a
reference on anything. Previously we did the correct thing for file based
faults by returning VM_FAULT_NOPAGE so we correctly drop the reference on
the page we faulted in.
Fix this by returning VM_FAULT_NOPAGE in the pmd_devmap_trans_unstable()
case, this makes us drop the ref on the page properly, and now my
reproducer no longer leaks the huge pages.
ZhaoLong Wang [Wed, 29 Jun 2022 12:43:24 +0000 (20:43 +0800)]
tmpfs: fix the issue that the mount and remount results are inconsistent.
An undefined-behavior issue has not been completely fixed since commit d14f5efadd84 ("tmpfs: fix undefined-behaviour in shmem_reconfigure()").
In the commit, check in the shmem_reconfigure() is added in remount
process to avoid the Ubsan problem. However, the check is not added to
the mount process. It causes inconsistent results between mount and
remount. The operations to reproduce the problem in user mode as follows:
If nr_blocks is set to 0x8000000000000000, the mounting is successful.
# mount tmpfs /dev/shm/ -t tmpfs -o nr_blocks=0x8000000000000000
However, when -o remount is used, the mount fails because of the
check in the shmem_reconfigure()
# mount tmpfs /dev/shm/ -t tmpfs -o remount,nr_blocks=0x8000000000000000
mount: /dev/shm: mount point not mounted or bad option.
Therefore, add checks in the shmem_parse_one() function and remove the
check in shmem_reconfigure() to avoid this problem.
Link: https://lkml.kernel.org/r/20220629124324.1640807-1-wangzhaolong1@huawei.com Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Cc: Luo Meng <luomeng12@huawei.com> Cc: Hugh Dickins <hughd@google.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Zhihao Cheng <chengzhihao1@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yee Lee [Tue, 28 Jun 2022 11:37:11 +0000 (19:37 +0800)]
mm: kfence: apply kmemleak_ignore_phys on early allocated pool
This patch solves two issues.
(1) The pool allocated by memblock needs to unregister from
kmemleak scanning. Apply kmemleak_ignore_phys to replace the
original kmemleak_free as its address now is stored in the phys tree.
(2) The pool late allocated by page-alloc doesn't need to unregister.
Move out the freeing operation from its call path.
Link: https://lkml.kernel.org/r/20220628113714.7792-2-yee.lee@mediatek.com Fixes: 0c24e061196c21d5 ("mm: kmemleak: add rbtree and store physical address for objects allocated with PA") Signed-off-by: Yee Lee <yee.lee@mediatek.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Suggested-by: Marco Elver <elver@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
bdi_sched_wait() is no longer used since commit 839a8e8660b6 ("writeback:
replace custom worker pool implementation with unbound workqueue"), so
remove it.
Link: https://lkml.kernel.org/r/20220713125314.171345-1-xiujianfeng@huawei.com Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Sat, 9 Jul 2022 09:25:27 +0000 (17:25 +0800)]
mm/mmap: fix obsolete comment of find_extend_vma
mmget_still_valid() has already been removed via commit 4d45e75a9955 ("mm:
remove the now-unnecessary mmget_still_valid() hack"). Update the
corresponding comment.
mm/page_alloc: use try_cmpxchg in set_pfnblock_flags_mask
Use try_cmpxchg instead of cmpxchg in set_pfnblock_flags_mask. x86
CMPXCHG instruction returns success in ZF flag, so this change saves a
compare after cmpxchg (and related move instruction in front of cmpxchg).
The main loop improves from:
1c5d: 48 89 c2 mov %rax,%rdx
1c60: 48 89 c1 mov %rax,%rcx
1c63: 48 21 fa and %rdi,%rdx
1c66: 4c 09 c2 or %r8,%rdx
1c69: f0 48 0f b1 16 lock cmpxchg %rdx,(%rsi)
1c6e: 48 39 c1 cmp %rax,%rcx
1c71: 75 ea jne 1c5d <...>
to:
1c60: 48 89 ca mov %rcx,%rdx
1c63: 48 21 c2 and %rax,%rdx
1c66: 4c 09 c2 or %r8,%rdx
1c69: f0 48 0f b1 16 lock cmpxchg %rdx,(%rsi)
1c6e: 75 f0 jne 1c60 <...>
Gang Li [Wed, 6 Jul 2022 03:46:54 +0000 (11:46 +0800)]
mm, hugetlb: skip irrelevant nodes in show_free_areas()
show_free_areas() allows to filter out node specific data which is
irrelevant to the allocation request. But hugetlb_show_meminfo() still
shows hugetlb on all nodes, which is redundant and unnecessary.
Use show_mem_node_skip() to skip irrelevant nodes. And replace
hugetlb_show_meminfo() with hugetlb_show_meminfo_node(nid).
Patrick Wang [Tue, 5 Jul 2022 11:31:58 +0000 (19:31 +0800)]
mm: percpu: use kmemleak_ignore_phys() instead of kmemleak_free()
Kmemleak recently added a rbtree to store the objects allocted with
physical address. Those objects can't be freed with kmemleak_free().
According to the comments, percpu allocations are tracked by kmemleak
separately. Kmemleak_free() was used to avoid the unnecessary
tracking. If kmemleak_free() fails, those objects would be scanned by
kmemleak, which is unnecessary but shouldn't lead to other effects.
Use kmemleak_ignore_phys() instead of kmemleak_free() for those
objects.
Link: https://lkml.kernel.org/r/20220705113158.127600-1-patrick.wang.shcn@gmail.com Fixes: 0c24e061196c ("mm: kmemleak: add rbtree and store physical address for objects allocated with PA") Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:22:01 +0000 (21:22 +0800)]
mm/huge_memory: use helper macro IS_ERR_OR_NULL in split_huge_pages_pid
Use helper macro IS_ERR_OR_NULL to check the validity of page to simplify
the code. Minor readability improvement.
Link: https://lkml.kernel.org/r/20220704132201.14611-17-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:22:00 +0000 (21:22 +0800)]
mm/huge_memory: comment the subtly logic in __split_huge_pmd
It's dangerous and wrong to call page_folio(pmd_page(*pmd)) when pmd isn't
present. But the caller guarantees pmd is present when folio is set. So we
should be safe here. Add comment to make it clear.
Link: https://lkml.kernel.org/r/20220704132201.14611-16-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:59 +0000 (21:21 +0800)]
mm/huge_memory: correct comment of prep_transhuge_page
We use page->mapping and page->index, instead of page->indexlru in second
tail page as list_head. Correct it.
Link: https://lkml.kernel.org/r/20220704132201.14611-15-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:58 +0000 (21:21 +0800)]
mm/huge_memory: fix comment of page_deferred_list
The current comment is confusing because if global or memcg deferred list
in the second tail page is occupied by compound_head, why we still use
page[2].deferred_list here? I think it wants to say that Global or memcg
deferred list in the first tail page is occupied by compound_mapcount and
compound_pincount so we use the second tail page's deferred_list instead.
Link: https://lkml.kernel.org/r/20220704132201.14611-14-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:57 +0000 (21:21 +0800)]
mm/huge_memory: minor cleanup for split_huge_pages_all
There is nothing to do if a zone doesn't have any pages managed by the
buddy allocator. So we should check managed_zone instead. Also if a thp
is found, there's no need to traverse the subpages again.
Link: https://lkml.kernel.org/r/20220704132201.14611-13-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:56 +0000 (21:21 +0800)]
mm/huge_memory: try to free subpage in swapcache when possible
Subpages in swapcache won't be freed even if it is the last user of the
page until next time reclaim. It shouldn't hurt indeed, but we could try
to free these pages to save more memory for system.
Link: https://lkml.kernel.org/r/20220704132201.14611-12-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:55 +0000 (21:21 +0800)]
mm/huge_memory: check pmd_present first in is_huge_zero_pmd
When pmd is non-present, pmd_pfn returns an insane value. So we should
check pmd_present first to avoid acquiring such insane value and also
avoid touching possible cold huge_zero_pfn cache line when pmd isn't
present.
Link: https://lkml.kernel.org/r/20220704132201.14611-11-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:54 +0000 (21:21 +0800)]
mm/huge_memory: fix comment in zap_huge_pud
The comment about deposited pgtable is borrowed from zap_huge_pmd but
there's no deposited pgtable stuff for huge pud in zap_huge_pud. Remove
it to avoid confusion.
Link: https://lkml.kernel.org/r/20220704132201.14611-10-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:53 +0000 (21:21 +0800)]
mm/huge_memory: use helper macro __ATTR_RW
Use helper macro __ATTR_RW to define use_zero_page_attr, defrag_attr and
enabled_attr to make code more clear. Minor readability improvement.
Link: https://lkml.kernel.org/r/20220704132201.14611-9-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:52 +0000 (21:21 +0800)]
mm/huge_memory: use helper function vma_lookup in split_huge_pages_pid
Use helper function vma_lookup to lookup the needed vma to simplify the
code. Minor readability improvement.
Link: https://lkml.kernel.org/r/20220704132201.14611-8-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:51 +0000 (21:21 +0800)]
mm/huge_memory: rename mmun_start to haddr in remove_migration_pmd
mmun_start indicates mmu_notifier start address but there's no mmu_notifier
stuff in remove_migration_pmd. This will make it hard to get the meaning of
mmun_start. Rename it to haddr to avoid confusing readers and also imporve
readability.
Link: https://lkml.kernel.org/r/20220704132201.14611-7-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:50 +0000 (21:21 +0800)]
mm/huge_memory: use helper touch_pmd in huge_pmd_set_accessed
Use helper touch_pmd to set pmd accessed to simplify the code and improve
the readability. No functional change intended.
Link: https://lkml.kernel.org/r/20220704132201.14611-6-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:49 +0000 (21:21 +0800)]
mm/huge_memory: use helper touch_pud in huge_pud_set_accessed
Use helper touch_pud to set pud accessed to simplify the code and improve
the readability. No functional change intended.
Link: https://lkml.kernel.org/r/20220704132201.14611-5-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:48 +0000 (21:21 +0800)]
mm/huge_memory: fix comment of __pud_trans_huge_lock
__pud_trans_huge_lock returns page table lock pointer if a given pud maps
a thp instead of 'true' since introduced. Fix corresponding comments.
Link: https://lkml.kernel.org/r/20220704132201.14611-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:47 +0000 (21:21 +0800)]
mm/huge_memory: access vm_page_prot with READ_ONCE in remove_migration_pmd
vma->vm_page_prot is read lockless from the rmap_walk, it may be updated
concurrently. Using READ_ONCE to prevent the risk of reading intermediate
values.
Link: https://lkml.kernel.org/r/20220704132201.14611-3-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Mon, 4 Jul 2022 13:21:46 +0000 (21:21 +0800)]
mm/huge_memory: use flush_pmd_tlb_range in move_huge_pmd
Patch series "A few cleanup patches for huge_memory", v3.
This series contains a few cleaup patches to remove duplicated codes,
add/use helper functions, fix some obsolete comments and so on. More
details can be found in the respective changelogs.
This patch (of 16):
Arches with special requirements for evicting THP backing TLB entries can
implement flush_pmd_tlb_range. Otherwise also, it can help optimize TLB
flush in THP regime. Using flush_pmd_tlb_range to take advantage of this
in move_huge_pmd.
projects / users / jedix / linux-maple.git / log