Richard Henderson [Tue, 1 Aug 2023 14:55:38 +0000 (07:55 -0700)]
accel/tcg: Adjust parameters and locking with do_{ld,st}_mmio_*
Replace MMULookupPageData* with CPUTLBEntryFull, addr, size.
Move QEMU_IOTHREAD_LOCK_GUARD to the caller.
This simplifies the usage from do_ld16_beN and do_st16_leN, where
we weren't locking the entire operation, and required hoop jumping
for passing addr and size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 4 Aug 2023 21:47:00 +0000 (14:47 -0700)]
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fix VM build jobs on CirrusCI
* fix MMX instructions clobbering x87 state before raising #NM
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmTM6KwUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOpMAf/TcfaZt5bffmcnvGmrOBGQfvt1KNM
# QYhsNMZr3fyWoI7DpNgWg60P1iQ/2YgcTOjrH1yoKWnvxZqut4ZKyfxIbdnK84ns
# J4Q5YfUmzrd7cf+HyfPaiMdfcuZE1wGxMpLWNFtNOWutr5Dq95rOUnuiWaja05bH
# XUxwud3Jl1LWxmDIJaFs8fC+7q4s0le9S0Ws1KjejMiKs2epcTZW+5kS0jfRuLcB
# Sxx4oABWEhGA4CY+W+rf59SOrgsb7ySkRZjoQyj30pD61O+UJ3unhWDgLMQau6oT
# 2cP0Cv08PwhJQNByfOc6N+RH7CbPxsIBcainJ2Mf/b5oPoV5m/Kdlx5PzA==
# =+Im7
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 04 Aug 2023 05:01:48 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
ci: install meson in CirrusCI KVM build environment
target/i386: Check CR0.TS before enter_mmx
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 4 Aug 2023 16:18:46 +0000 (09:18 -0700)]
Merge tag 'pull-ppc-20230804' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-08-04:
This queue contains target/ppc register and VRMA fixes for 8.1. pegasos2
fixes are also included.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZM0YohYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFkuqAA/0QrRC8agLbSw1b8pN7bR9Yweqk8
# VKFotbyAH4QKO42KAP9GNeHU8iUcKk4l9eWip75mvwUsrLP/8INFWNGv1t76AQ==
# =5m4V
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 04 Aug 2023 08:26:26 AM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230804' of https://gitlab.com/danielhb/qemu:
target/ppc: Fix VRMA page size for ISA v3.0
target/ppc: Fix pending HDEC when entering PM state
target/ppc: Implement ASDR register for ISA v3.0 for HPT
ppc/pegasos2: Fix reg property of 64 bit BARs in device tree
ppc/pegasos2: Fix naming of device tree nodes
ppc/pegasos2: Fix reg property of ROM BARs
ppc/pegasos2: Fix reset state of USB functions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nicholas Piggin [Sun, 30 Jul 2023 11:18:42 +0000 (21:18 +1000)]
target/ppc: Fix VRMA page size for ISA v3.0
Until v2.07s, the VRMA page size (L||LP) was encoded in LPCR[VRMASD].
In v3.0 that moved to the partition table PS field.
The powernv machine can now run KVM HPT guests on POWER9/10 CPUs with
this fix and the patch to add ASDR.
Fixes: 3367c62f522b ("target/ppc: Support for POWER9 native hash") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230730111842.39292-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Nicholas Piggin [Wed, 26 Jul 2023 18:22:27 +0000 (04:22 +1000)]
target/ppc: Fix pending HDEC when entering PM state
HDEC is defined to not wake from PM state. There is a check in the HDEC
timer to avoid setting the interrupt if we are in a PM state, but no
check on PM entry to lower HDEC if it already fired. This can cause a
HDECR wake up and QEMU abort with unsupported exception in Power Save
mode.
Fixes: 4b236b621bf ("ppc: Initial HDEC support") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230726182230.433945-4-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Nicholas Piggin [Wed, 26 Jul 2023 18:22:25 +0000 (04:22 +1000)]
target/ppc: Implement ASDR register for ISA v3.0 for HPT
The ASDR register was introduced in ISA v3.0. It has not been
implemented for HPT. With HPT, ASDR is the format of the slbmte RS
operand (containing VSID), which matches the ppc_slb_t field.
Fixes: 3367c62f522b ("target/ppc: Support for POWER9 native hash") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230726182230.433945-2-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The board firmware names devices by their class so match that for
common devices. Also make sure the /rtas node has a name. This is
needed because VOF otherwise does not include it in results got by
nextprop which is how AmigaOS queries it and fails if no name property
is found.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <808ade37aa141563d1ee349254151672bf7a5d59.1689725688.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The original non-free board firmware sets the command register of the
USB functions to 7 and some guests rely on this for working USB. Match
what the board firmware does when using VOF instead.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <06a2b864431425f23d1f2b5abf0c027819ac11c6.1689725688.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Paolo Bonzini [Fri, 4 Aug 2023 11:55:22 +0000 (13:55 +0200)]
ci: install meson in CirrusCI KVM build environment
scripts/archive-source.sh needs meson in order to download the subprojects,
therefore meson needs to be part of the host environment in which VM-based
build jobs run.
Fixes: 2019cabfee0 ("meson: subprojects: replace submodules with wrap files", 2023-06-06) Reported-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Matt Borgerson [Thu, 13 Jul 2023 07:29:01 +0000 (00:29 -0700)]
target/i386: Check CR0.TS before enter_mmx
When CR0.TS=1, execution of x87 FPU, MMX, and some SSE instructions will
cause a Device Not Available (DNA) exception (#NM). System software uses
this exception event to lazily context switch FPU state.
Before this patch, enter_mmx helpers may be generated just before #NM
generation, prematurely resetting FPU state before the guest has a
chance to save it.
Signed-off-by: Matt Borgerson <contact@mborgerson.com>
Message-ID: <CADc=-s5F10muEhLs4f3mxqsEPAHWj0XFfOC2sfFMVHrk9fcpMg@mail.gmail.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Richard Henderson [Fri, 4 Aug 2023 01:49:45 +0000 (18:49 -0700)]
Merge tag 'hppa-linux-user-speedup-pull-request' of https://github.com/hdeller/qemu-hppa into staging
Generated code size reduction with linux-user for hppa
Would you please consider pulling this trivial fix, which reduces
the generated code on x86 by ~3% when running linux-user with
the hppa target?
Thanks,
Helge
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZMwriQAKCRD3ErUQojoP
# X0oxAQC7HlQ4j23o4ylqbXTiZdOeY26TjWTlw38OkuSXcqgCMAD/UmwEDawEGTKv
# SuRjrASdFzpjvjDss2nreahL9hGvrAI=
# =eoAk
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Aug 2023 03:34:49 PM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-linux-user-speedup-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Move iaoq registers and thus reduce generated code size
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/hppa: Move iaoq registers and thus reduce generated code size
On hppa the Instruction Address Offset Queue (IAOQ) registers specifies
the next to-be-executed instructions addresses. Each generated TB writes those
registers at least once, so those registers are used heavily in generated
code.
Looking at the generated assembly, for a x86-64 host this code
to write the address $0x7ffe826f into iaoq_f is generated:
0x7f73e8000184: c7 85 d4 01 00 00 6f 82 movl $0x7ffe826f, 0x1d4(%rbp)
0x7f73e800018c: fe 7f
0x7f73e800018e: c7 85 d8 01 00 00 73 82 movl $0x7ffe8273, 0x1d8(%rbp)
0x7f73e8000196: fe 7f
With the trivial change, by moving the variables iaoq_f and iaoq_b to
the top of struct CPUArchState, the offset to %rbp is reduced (from
0x1d4 to 0), which allows the x86-64 tcg to generate 3 bytes less of
generated code per move instruction:
0x7fc1e800018c: c7 45 00 6f 82 fe 7f movl $0x7ffe826f, (%rbp)
0x7fc1e8000193: c7 45 04 73 82 fe 7f movl $0x7ffe8273, 4(%rbp)
Overall this is a reduction of generated code (not a reduction of
number of instructions).
A test run with checks the generated code size by running "/bin/ls"
with qemu-user shows that the code size shrinks from 1616767 to 1569273
bytes, which is ~97% of the former size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Helge Deller <deller@gmx.de> Cc: qemu-stable@nongnu.org
zhenwei pi [Thu, 3 Aug 2023 02:43:13 +0000 (10:43 +0800)]
virtio-crypto: verify src&dst buffer length for sym request
For symmetric algorithms, the length of ciphertext must be as same
as the plaintext.
The missing verification of the src_len and the dst_len in
virtio_crypto_sym_op_helper() may lead buffer overflow/divulged.
This patch is originally written by Yiming Tao for QEMU-SECURITY,
resend it(a few changes of error message) in qemu-devel.
Fixes: CVE-2023-3180 Fixes: 04b9b37edda("virtio-crypto: add data queue processing handler") Cc: Gonglei <arei.gonglei@huawei.com> Cc: Mauro Matteo Cascella <mcascell@redhat.com> Cc: Yiming Tao <taoym@zju.edu.cn> Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230803024314.29962-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Thomas Huth [Wed, 2 Aug 2023 13:57:23 +0000 (15:57 +0200)]
include/hw/i386/x86-iommu: Fix struct X86IOMMU_MSIMessage for big endian hosts
The first bitfield here is supposed to be used as a 64-bit equivalent
to the "uint64_t msi_addr" in the union. To make this work correctly
on big endian hosts, too, the __addr_hi field has to be part of the
bitfield, and the the bitfield members must be declared with "uint64_t"
instead of "uint32_t" - otherwise the values are placed in the wrong
bytes on big endian hosts.
Same applies to the 32-bit "msi_data" field: __resved1 must be part
of the bitfield, and the members must be declared with "uint32_t"
instead of "uint16_t".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-7-thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
Thomas Huth [Wed, 2 Aug 2023 13:57:22 +0000 (15:57 +0200)]
hw/i386/x86-iommu: Fix endianness issue in x86_iommu_irq_to_msi_message()
The values in "msg" are assembled in host endian byte order (the other
field are also not swapped), so we must not swap the __addr_head here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-6-thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Xu <peterx@redhat.com>
Thomas Huth [Wed, 2 Aug 2023 13:57:21 +0000 (15:57 +0200)]
hw/i386/intel_iommu: Fix index calculation in vtd_interrupt_remap_msi()
The values in "addr" are populated locally in this function in host
endian byte order, so we must not swap the index_l field here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-5-thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Xu <peterx@redhat.com>
Thomas Huth [Wed, 2 Aug 2023 13:57:20 +0000 (15:57 +0200)]
hw/i386/intel_iommu: Fix struct VTDInvDescIEC on big endian hosts
On big endian hosts, we need to reverse the bitfield order in the
struct VTDInvDescIEC, just like it is already done for the other
bitfields in the various structs of the intel-iommu device.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-4-thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
Thomas Huth [Wed, 2 Aug 2023 13:57:19 +0000 (15:57 +0200)]
hw/i386/intel_iommu: Fix endianness problems related to VTD_IR_TableEntry
The code already tries to do some endianness handling here, but
currently fails badly:
- While it already swaps the data when logging errors / tracing, it fails
to byteswap the value before e.g. accessing entry->irte.present
- entry->irte.source_id is swapped with le32_to_cpu(), though this is
a 16-bit value
- The whole union is apparently supposed to be swapped via the 64-bit
data[2] array, but the struct is a mixture between 32 bit values
(the first 8 bytes) and 64 bit values (the second 8 bytes), so this
cannot work as expected.
Fix it by converting the struct to two proper 64-bit bitfields, and
by swapping the values only once for everybody right after reading
the data from memory.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-3-thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
After reading the guest memory with dma_memory_read(), we have
to make sure that we byteswap the little endian data to the host's
byte order.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-2-thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Xu <peterx@redhat.com>
Li Feng [Mon, 31 Jul 2023 12:10:06 +0000 (20:10 +0800)]
vhost: fix the fd leak
When the vhost-user reconnect to the backend, the notifer should be
cleanup. Otherwise, the fd resource will be exhausted.
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt") Signed-off-by: Li Feng <fengli@smartx.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20230731121018.2856310-2-fengli@smartx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Fiona Ebner <f.ebner@proxmox.com>
pci: do not respond config requests after PCI device eject
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2224964
In migration with VF failover, Windows guest and ACPI hot
unplug we do not need to satisfy config requests, otherwise
the guest immediately detects the device and brings up its
driver. Many network VF's are stuck on the guest PCI bus after
the migration.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20230728084049.191454-1-yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hanna Czenczek [Fri, 21 Jul 2023 13:49:45 +0000 (15:49 +0200)]
virtio: Fix packed virtqueue used_idx mask
virtio_queue_packed_set_last_avail_idx() is used by vhost devices to set
the internal queue indices to what has been reported by the vhost
back-end through GET_VRING_BASE. For packed virtqueues, this
32-bit value is expected to contain both the device's internal avail and
used indices, as well as their respective wrap counters.
To get the used index, we shift the 32-bit value right by 16, and then
apply a mask of 0x7ffff. That seems to be a typo, because it should be
0x7fff; first of all, the virtio specification says that the maximum
queue size for packed virt queues is 2^15, so the indices cannot exceed
2^15 - 1 anyway, making 0x7fff the correct mask. Second, the mask
clearly is wrong from context, too, given that (A) `idx & 0x70000` must
be 0 at this point (`idx` is 32 bit and was shifted to the right by 16
already), (B) `idx & 0x8000` is the used_wrap_counter, so should not be
part of the used index, and (C) `vq->used_idx` is a `uint16_t`, so
cannot fit the 0x70000 part of the mask anyway.
This most likely never produced any guest-visible bugs, though, because
for a vhost device, qemu will probably not evaluate the used index
outside of virtio_queue_packed_get_last_avail_idx(), where we
reconstruct the 32-bit value from avail and used indices and their wrap
counters again. There, it does not matter whether the highest bit of
the used_idx is the used index wrap counter, because we put the wrap
counter exactly in that position anyway.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230721134945.26967-1-hreitz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: German Maglione <gmaglione@redhat.com>
David Edmondson [Fri, 21 Jul 2023 07:28:20 +0000 (08:28 +0100)]
hw/virtio: qmp: add RING_RESET to 'info virtio-status'
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20230721072820.75797-1-david.edmondson@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Igor Mammedov [Thu, 20 Jul 2023 13:38:58 +0000 (15:38 +0200)]
tests: acpi: update expected blobs
Expected change is that _ADR object is removed from
hostbridge descriptor in DSDT for PC and Q35 machines.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-7-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Thu, 20 Jul 2023 13:38:57 +0000 (15:38 +0200)]
acpi: x86: remove _ADR on host bridges
ACPI spec (since 2.0a) says
"
A device object must contain either an _HID object or
an _ADR object, but can contain both.
"
_ADR is used when device is attached to an ennumerable bus,
however hostbridge is not and uses dedicated _HID for
discovery, drop _ADR field.
It doesn't seem that having _ADR has a negative effects
OSes manage to tolerate that, but there is no point of
having it there. (only pc/q35 has it hostbridge description,
while others (microvm/arm) don't)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Thu, 20 Jul 2023 13:38:56 +0000 (15:38 +0200)]
tests: acpi: whitelist expected blobs
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Thu, 20 Jul 2023 13:38:54 +0000 (15:38 +0200)]
x86: acpi: workaround Windows not handling name references in Package properly
it seems that Windows is unable to handle variable references
making it choke up when accessing ASUN during _DSM call
when device is hotplugged (it lists package elements as DataAlias
but despite that later on it misbehaves) with following error
shown up in AMLI debugger (WS2012r2):
Store(ShiftLeft(One,Arg1="ASUN",) AMLI_ERROR(c0140008): Unexpected argument type
ValidateArgTypes: expected Arg1 to be type Integer (Type=String)
Similar outcome with WS2022.
Issue is not fatal but as result acpi-index/"PCI Label ID" property
is either not shown in device details page or shows incorrect value.
Fix it by doing assignment of BSEL/ASUN values to package
elements manually after package declaration.
Fix was tested with: WS2012r2, WS2022, RHEL9
Fixes: 467d099a2985 (x86: acpi: _DSM: use Package to pass parameters) Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Thu, 20 Jul 2023 13:38:53 +0000 (15:38 +0200)]
tests: acpi: x86: whitelist expected blobs
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Milan Zamazal [Thu, 20 Jul 2023 10:10:37 +0000 (12:10 +0200)]
hw/virtio: Add a protection against duplicate vu_scmi_stop calls
The QEMU CI fails in virtio-scmi test occasionally. As reported by
Thomas Huth, this happens most likely when the system is loaded and it
fails with the following error:
qemu-system-aarch64: ../../devel/qemu/hw/pci/msix.c:659:
msix_unset_vector_notifiers: Assertion `dev->msix_vector_use_notifier && dev->msix_vector_release_notifier' failed.
../../devel/qemu/tests/qtest/libqtest.c:200: kill_qemu() detected QEMU death from signal 6 (Aborted) (core dumped)
As discovered by Fabiano Rosas, the cause is a duplicate invocation of
msix_unset_vector_notifiers via duplicate vu_scmi_stop calls:
While vu_scmi_stop calls are protected by vhost_dev_is_started()
check, it's apparently not enough. vhost-user-blk and vhost-user-gpio
use an extra protection, see f5b22d06fb (vhost: recheck dev state in
the vhost_migration_log routine) for the motivation. Let's use the
same in vhost-user-scmi, which fixes the failure above.
Fixes: a5dab090e142 ("hw/virtio: Add boilerplate for vhost-user-scmi device") Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230720101037.2161450-1-mzamazal@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de>
Eric Auger [Tue, 18 Jul 2023 18:21:36 +0000 (20:21 +0200)]
virtio-iommu: Standardize granule extraction and formatting
At several locations we compute the granule from the config
page_size_mask using ctz() and then format it in traces using
BIT(). As the page_size_mask is 64b we should use ctz64 and
BIT_ULL() for formatting. We failed to be consistent.
Note the page_size_mask is garanteed to be non null. The spec
mandates the device to set at least one bit, so ctz64 cannot
return 64. This is garanteed by the fact the device
initializes the page_size_mask to qemu_target_page_mask()
and then the page_size_mask is further constrained by
virtio_iommu_set_page_size_mask() callback which can't
result in a new mask being null. So if Coverity complains
round those ctz64/BIT_ULL with CID 1517772 this is a false
positive
Signed-off-by: Eric Auger <eric.auger@redhat.com> Fixes: 94df5b2180 ("virtio-iommu: Fix 64kB host page size VFIO device assignment")
Message-Id: <20230718182136.40096-1-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Peter Maydell [Tue, 18 Jul 2023 10:13:27 +0000 (11:13 +0100)]
hw/pci-bridge/cxl_upstream.c: Use g_new0() in build_cdat_table()
In build_cdat_table() we do:
*cdat_table = g_malloc0(sizeof(*cdat_table) * CXL_USP_CDAT_NUM_ENTRIES);
This is wrong because:
- cdat_table has type CDATSubHeader ***
- so *cdat_table has type CDATSubHeader **
- so the array we're allocating here should be items of type CDATSubHeader *
- but we pass sizeof(*cdat_table), which is sizeof(CDATSubHeader **),
implying that we're allocating an array of CDATSubHeader **
It happens that sizeof(CDATSubHeader **) == sizeof(CDATSubHeader *)
so nothing blows up, but this should be sizeof(**cdat_table).
Avoid this excessively hard-to-understand code by using
g_new0() instead, which will do the type checking for us.
While we're here, we can drop the useless check against failure,
as g_malloc0() and g_new0() never fail.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230718101327.1111374-1-peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Eric Auger [Mon, 17 Jul 2023 16:21:26 +0000 (18:21 +0200)]
hw/virtio-iommu: Fix potential OOB access in virtio_iommu_handle_command()
In the virtio_iommu_handle_command() when a PROBE request is handled,
output_size takes a value greater than the tail size and on a subsequent
iteration we can get a stack out-of-band access. Initialize the
output_size on each iteration.
The issue was found with ASAN. Credits to:
Yiming Tao(Zhejiang University)
Gaoning Pan(Zhejiang University)
Fixes: 1733eebb9e7 ("virtio-iommu: Implement RESV_MEM probe request") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Mauro Matteo Cascella <mcascell@redhat.com> Cc: qemu-stable@nongnu.org
Message-Id: <20230717162126.11693-1-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Richard Henderson [Thu, 3 Aug 2023 16:22:25 +0000 (09:22 -0700)]
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
Fix for an fd leak in the blkio block driver.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTLzf0ACgkQnKSrs4Gr
# c8hoGQf+KjsuChyk8/aoDP4MMkNB1/X3nsazCd3GY3uE+DRK8ieiRJeT6chMIey/
# sK3v/drkDmdjj30qbXGxjLVa5SNsP9N6pVoo8fnFJN7LmGBE/JLEYUYVNpHAKEzb
# N7mgDBcTHZWKGwZsh109X5l3Cr6HR484m3qKI/49qlVuWJmp8/lDUbFJbp96I6g9
# ki9W0itwOrdtebYyUDml8eE/yLOxOTWx5Q7Q+qwSiEUNCwyd7yOS1QHQbnCgKw3m
# c0Qzch2Z3dT61YbMrF6j0H7M1dXXcbNFdYVeMHYYJRkeN+bz4fWcUC4HkrL6YWf5
# GLIj5irTSnae4TevlYVZT+72v99QQQ==
# =pQ96
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Aug 2023 08:55:41 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
block/blkio: add more comments on the fd passing handling
block/blkio: close the fd when blkio_connect() fails
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stefano Garzarella [Thu, 3 Aug 2023 08:28:25 +0000 (10:28 +0200)]
block/blkio: add more comments on the fd passing handling
As Hanna pointed out, it is not clear in the code why qemu_open()
can fail, and why blkio_set_int("fd") is not enough to discover
the `fd` property support.
Let's fix them by adding more details in the code comments.
Suggested-by: Hanna Czenczek <hreitz@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230803082825.25293-3-sgarzare@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefano Garzarella [Thu, 3 Aug 2023 08:28:24 +0000 (10:28 +0200)]
block/blkio: close the fd when blkio_connect() fails
libblkio drivers take ownership of `fd` only after a successful
blkio_connect(), so if it fails, we are still the owners.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk") Suggested-by: Hanna Czenczek <hreitz@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20230803082825.25293-2-sgarzare@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Richard Henderson [Thu, 3 Aug 2023 14:37:17 +0000 (07:37 -0700)]
Merge tag 'pull-request-2023-08-03' of https://gitlab.com/thuth/qemu into staging
* Fix timeout problems in the MSYS Gitlab CI jobs
* Fix a problem when compiling with Clang on Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmTLijMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbW+OQ/5ASeu4rx6jyE8JFqRtvP6NEZ+UgQMRoCg
# NEfmSd9Y+tFewyuhLY5Pf6yUJWEljrdXp5ST6FId759l6DZ6mzQu809v427nN4Sb
# CxcwRYtoT2eEU0zhJ5ShnCXsNCl7Yyco3elWWFL3kbw4X2ooeOPkkGqQ1Tdfym8m
# /C+KVvFqFq4pnLnqMi7StylWtjYh/rAIMOw4kBDc3xU67eZiAd17+Hn9/t3Kca39
# 99A1JW0LiR0U1ZkX7R/q8YbICUtBsrPww9HmqlX7BoNy2vzr6jgKqo1dkm5QkDfK
# ZEzvS1nssb3iiavIJbO7entWMcryzAiu6LF5imbI4e5T5uwerd3RVoHCsem2mu7Q
# CUoCEYjCFYC7HTRLl80UKcbPC1tn6y6q+PGaFY0z2eJnaxHifbY0rVu3eKo/oJIb
# Ba1ltlxlXKIey6usJcEjG7ZEgYsyxtmX0KJQgjWaKvuMx2ElcEMg4J/eE57NEmW/
# srfTrUpSZwplnEX8C8wQeqmzoBvUmubLiO7Z9l8yqMHcqXxn95fybxPFGafpAziF
# hQ9Qs6YB81522V9JG6pt135vUXWA+L5UiptYc97PHZ66E2hZrfUrA1tm0lajcZI+
# GARvFLMfsNWIPPnS2iz8jMrkXtTc3xgTz2zEv2BL9s9sUH0+L6ggDY8DgbjITrjF
# hM4vUezCa7E=
# =K5Qb
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Aug 2023 04:06:27 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-08-03' of https://gitlab.com/thuth/qemu:
gitlab: disable FF_SCRIPT_SECTIONS on msys jobs
gitlab: disable optimization and debug symbols in msys build
configure: support passthrough of -Dxxx args to meson
gitlab: always populate cache for windows msys jobs
gitlab: drop $CI_PROJECT_DIR from cache path
gitlab: always use updated msys installer
gitlab: print timestamps during windows msys jobs
gitlab: remove duplication between msys jobs
util/oslib-win32: Fix compiling with Clang from MSYS2
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Daniel P. Berrangé [Tue, 1 Aug 2023 13:04:03 +0000 (14:04 +0100)]
gitlab: disable FF_SCRIPT_SECTIONS on msys jobs
The FF_SCRIPT_SECTIONS=1 variable should ordinarily cause output from
each line of the job script to be presented in a collapsible section
with execution time listed.
While it works on Linux shared runners, when used with Windows runners
with PowerShell, this option does not create any sections, and actually
causes echo'ing of commands to be disabled, making it even worse to
debug the jobs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-9-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel P. Berrangé [Tue, 1 Aug 2023 13:04:02 +0000 (14:04 +0100)]
gitlab: disable optimization and debug symbols in msys build
Building at -O2, adds 33% to the build time, over -O2. IOW a build that
takes 45 minutes at -O0, takes 60 minutes at -O2. Turning off debug
symbols drops it further, down to 38 minutes.
IOW, a "-O2 -g" build is 58% slower than a "-O0" build on msys in the
gitlab CI windows shared runners.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230801130403.164060-8-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel P. Berrangé [Tue, 1 Aug 2023 13:04:01 +0000 (14:04 +0100)]
configure: support passthrough of -Dxxx args to meson
This can be useful for setting some meson global options, such as the
optimization level or debug state.xs
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230801130403.164060-7-berrange@redhat.com>
[thuth: Move the help text into the section with the other --... options] Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel P. Berrangé [Tue, 1 Aug 2023 13:04:00 +0000 (14:04 +0100)]
gitlab: always populate cache for windows msys jobs
The cache is used to hold the msys installer. Even if the build phase
fails, we should still populate the cache as the installer will be
valid for next time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-6-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel P. Berrangé [Tue, 1 Aug 2023 13:03:59 +0000 (14:03 +0100)]
gitlab: drop $CI_PROJECT_DIR from cache path
The gitlab cache is limited to only handle content within the
$CI_PROJECT_DIR hierarchy, and as such relative paths are always
implicitly relative to $CI_PROJECT_DIR.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-5-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel P. Berrangé [Tue, 1 Aug 2023 13:03:58 +0000 (14:03 +0100)]
gitlab: always use updated msys installer
We current reference an msys installer binary from mid-2022, which means
after installation, it immediately has to re-download a bunch of newer
content. This wastes precious CI time.
The msys project publishes an installer binary with a fixed URL that
always references the latest content. We cache the downloads in gitlab
though and so once downloaded we would never re-fetch the installer
leading back to the same problem.
To deal with this we also fetch the pgp signature for the installer
on every run, and compare that to the previously cached signature. If
the signature changes, we re-download the full installer.
This ensures we always have the latest installer for msys, while also
maximising use of the gitlab cache.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-4-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel P. Berrangé [Tue, 1 Aug 2023 13:03:57 +0000 (14:03 +0100)]
gitlab: print timestamps during windows msys jobs
It is hard to get visibility into where time is consumed in our Windows
msys jobs. Adding a few log console messages with the timestamp will
aid in our debugging.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-3-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel P. Berrangé [Tue, 1 Aug 2023 13:03:56 +0000 (14:03 +0100)]
gitlab: remove duplication between msys jobs
Although they share a common parent, the two msys jobs still have
massive duplication in their script definitions that can easily be
collapsed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-2-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Fri, 28 Jul 2023 14:27:45 +0000 (16:27 +0200)]
util/oslib-win32: Fix compiling with Clang from MSYS2
Clang complains:
../util/oslib-win32.c:483:56: error: omitting the parameter name in a
function definition is a C2x extension [-Werror,-Wc2x-extensions]
win32_close_exception_handler(struct _EXCEPTION_RECORD*,
^
Fix it by adding parameter names.
Message-Id: <20230728142748.305341-4-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Richard Henderson [Wed, 2 Aug 2023 13:51:29 +0000 (06:51 -0700)]
Merge tag 'misc-fixes-20230801' of https://github.com/philmd/qemu into staging
Misc patches queue
xen: Fix issues reported by fuzzer / Coverity
misc: Fix some typos in documentation and comments
ui/dbus: Build fixes for Clang/win32/!opengl
linux-user: Semihosting fixes on m68k/nios2
tests/migration: Disable stack protector when linking without stdlib
qapi: Reformat the dirty-limit migration doc comments
Reformat the dirty-limit migration doc comments to conform
to current conventions as commit a937b6aa739 (qapi: Reformat
doc comments to conform to current conventions).
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Message-ID: <169073570563.19893.2928364761104733482-1@git.sr.ht> Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Whitespace tidied up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
The arguments for deposit64 are (value, start, length, fieldval); this
appears to have thought they were (value, fieldval, start,
length). Reorder the parameters to match the actual function.
Cc: qemu-stable@nongnu.org Fixes: 950272506d ("target/m68k: Use semihosting/syscalls.h") Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230801154519.3505531-1-peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The arguments for deposit64 are (value, start, length, fieldval); this
appears to have thought they were (value, fieldval, start,
length). Reorder the parameters to match the actual function.
Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Fixes: d1e23cbaa403b2d ("target/nios2: Use semihosting/syscalls.h") Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230731235245.295513-1-keithp@keithp.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Keith Packard [Tue, 1 Aug 2023 15:22:45 +0000 (08:22 -0700)]
target/nios2: Pass semihosting arg to exit
Instead of using R_ARG0 (the semihost function number), use R_ARG1
(the provided exit status).
Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230801152245.332749-1-keithp@keithp.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
A build of GCC 13.2 will have stack protector enabled by default if it
was configured with --enable-default-ssp option. For such a compiler,
it is necessary to explicitly disable stack protector when linking
without standard libraries.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230731091042.139159-2-akihiko.odaki@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Stefan Weil [Sun, 30 Jul 2023 18:03:29 +0000 (20:03 +0200)]
misc: Fix some typos in documentation and comments
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230730180329.851576-1-sw@weilnetz.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
David Woodhouse [Tue, 25 Jul 2023 10:05:00 +0000 (12:05 +0200)]
hw/xen: prevent guest from binding loopback event channel to itself
Fuzzing showed that a guest could bind an interdomain port to itself, by
guessing the next port to be allocated and putting that as the 'remote'
port number. By chance, that works because the newly-allocated port has
type EVTCHNSTAT_unbound. It shouldn't.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230801175747.145906-4-dwmw2@infradead.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
David Woodhouse [Mon, 22 May 2023 18:52:00 +0000 (20:52 +0200)]
i386/xen: consistent locking around Xen singleshot timers
Coverity points out (CID 1507534, 1507968) that we sometimes access
env->xen_singleshot_timer_ns under the protection of
env->xen_timers_lock and sometimes not.
This isn't always an issue. There are two modes for the timers; if the
kernel supports the EVTCHN_SEND capability then it handles all the timer
hypercalls and delivery internally, and all we use the field for is to
get/set the timer as part of the vCPU state via an ioctl(). If the
kernel doesn't have that support, then we do all the emulation within
qemu, and *those* are the code paths where we actually care about the
locking.
But it doesn't hurt to be a little bit more consistent and avoid having
to explain *why* it's OK.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230801175747.145906-3-dwmw2@infradead.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
David Woodhouse [Fri, 7 Apr 2023 15:12:00 +0000 (17:12 +0200)]
hw/xen: fix off-by-one in xen_evtchn_set_gsi()
Coverity points out (CID 1508128) a bounds checking error. We need to check
for gsi >= IOAPIC_NUM_PINS, not just greater-than.
Also fix up an assert() that has the same problem, that Coverity didn't see.
Fixes: 4f81baa33ed6 ("hw/xen: Support GSI mapping to PIRQ") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230801175747.145906-2-dwmw2@infradead.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Daniel P. Berrangé [Tue, 20 Jun 2023 08:45:34 +0000 (09:45 +0100)]
io: remove io watch if TLS channel is closed during handshake
The TLS handshake make take some time to complete, during which time an
I/O watch might be registered with the main loop. If the owner of the
I/O channel invokes qio_channel_close() while the handshake is waiting
to continue the I/O watch must be removed. Failing to remove it will
later trigger the completion callback which the owner is not expecting
to receive. In the case of the VNC server, this results in a SEGV as
vnc_disconnect_start() tries to shutdown a client connection that is
already gone / NULL.
CVE-2023-3354 Reported-by: jiangyegen <jiangyegen@huawei.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Richard Henderson [Tue, 1 Aug 2023 14:27:31 +0000 (07:27 -0700)]
Merge tag 'pull-xen-20230801' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm into staging
Misc fixes, for thread-pool, xen, and xen-emulate
* fix an access to `request_cond` QemuCond in thread-pool
* fix issue with PCI devices when unplugging IDE devices in Xen guest
* several fixes for issues pointed out by Coverity
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAmTI0qcACgkQDPVXL9f7
# Va9DVAgAlKGhkOhLiOtlwL05iI8/YiT7ekCSoMTWYO8iIyLCKGLVU5yyOAqYiAJD
# dEgXNZOeulcLkn3LDCQYtZJmD42sUHv/xmdJ06zJ9jRvtLAJp5wuwaU9JFDhJPsG
# eYPGBMdO39meUmgQe3X27CEKtht5Z8M9ZABdTLAxMyPANEzFmT7ni9wd/8Uc+tWg
# BMsXQco8e1GSiBUjSky5nSW248FVDIyjkaYWk1poXEfm4gPQ0jf9gg/biEj44cSH
# Tdz6de1kTwJfuYR+h+COQOrq0fUfz4SyVocKvtycZhKGXIqL74DiIGatxdVOwV9Y
# NJ8g4oKDgDeMBZ66kXnTX4Y9nzhPpA==
# =CdlZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Aug 2023 02:38:47 AM PDT
# gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [unknown]
# gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8
# Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF
* tag 'pull-xen-20230801' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm:
xen-platform: do full PCI reset during unplug of IDE devices
xen: Don't pass MemoryListener around by value
thread-pool: signal "request_cond" while locked
xen-block: Avoid leaks on new error path
hw/xen: Clarify (lack of) error handling in transaction_commit()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Olaf Hering [Thu, 20 Jul 2023 07:29:50 +0000 (09:29 +0200)]
xen-platform: do full PCI reset during unplug of IDE devices
The IDE unplug function needs to reset the entire PCI device, to make
sure all state is initialized to defaults. This is done by calling
pci_device_reset, which resets not only the chip specific registers, but
also all PCI state. This fixes "unplug" in a Xen HVM domU with the
modular legacy xenlinux PV drivers.
Commit ee358e919e38 ("hw/ide/piix: Convert reset handler to
DeviceReset") changed the way how the the disks are unplugged. Prior
this commit the PCI device remained unchanged. After this change,
piix_ide_reset is exercised after the "unplug" command, which was not
the case prior that commit. This function resets the command register.
As a result the ata_piix driver inside the domU will see a disabled PCI
device. The generic PCI code will reenable the PCI device. On the qemu
side, this runs pci_default_write_config/pci_update_mappings. Here a
changed address is returned by pci_bar_address, this is the address
which was truncated in piix_ide_reset. In case of a Xen HVM domU, the
address changes from 0xc120 to 0xc100. This truncation was a bug in
piix_ide_reset, which was fixed in commit 230dfd9257 ("hw/ide/piix:
properly initialize the BMIBA register"). If pci_xen_ide_unplug had used
pci_device_reset, the PCI registers would have been properly reset, and
commit ee358e919e38 would have not introduced a regression for this
specific domU environment.
While the unplug is supposed to hide the IDE disks, the changed BMIBA
address broke the UHCI device. In case the domU has an USB tablet
configured, to recive absolute pointer coordinates for the GUI, it will
cause a hang during device discovery of the partly discovered USB hid
device. Reading the USBSTS word size register will fail. The access ends
up in the QEMU piix-bmdma device, instead of the expected uhci device.
Here a byte size request is expected, and a value of ~0 is returned. As
a result the UCHI driver sees an error state in the register, and turns
off the UHCI controller.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230720072950.20198-1-olaf@aepfle.de> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Peter Maydell [Tue, 18 Jul 2023 10:10:57 +0000 (11:10 +0100)]
xen: Don't pass MemoryListener around by value
Coverity points out (CID 1513106, 1513107) that MemoryListener is a
192 byte struct which we are passing around by value. Switch to
passing a const pointer into xen_register_ioreq() and then to
xen_do_ioreq_register(). We can also make the file-scope
MemoryListener variables const, since nothing changes them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230718101057.1110979-1-peter.maydell@linaro.org> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Anthony PERARD [Fri, 14 Jul 2023 15:27:20 +0000 (16:27 +0100)]
thread-pool: signal "request_cond" while locked
thread_pool_free() might have been called on the `pool`, which would
be a reason for worker_thread() to quit. In this case,
`pool->request_cond` is been destroyed.
If worker_thread() didn't managed to signal `request_cond` before it
been destroyed by thread_pool_free(), we got:
util/qemu-thread-posix.c:198: qemu_cond_signal: Assertion `cond->initialized' failed.
One backtrace:
__GI___assert_fail (assertion=0x55555614abcb "cond->initialized", file=0x55555614ab88 "util/qemu-thread-posix.c", line=198,
function=0x55555614ad80 <__PRETTY_FUNCTION__.17104> "qemu_cond_signal") at assert.c:101
qemu_cond_signal (cond=0x7fffb800db30) at util/qemu-thread-posix.c:198
worker_thread (opaque=0x7fffb800dab0) at util/thread-pool.c:129
qemu_thread_start (args=0x7fffb8000b20) at util/qemu-thread-posix.c:505
start_thread (arg=<optimized out>) at pthread_create.c:486
Anthony PERARD [Tue, 4 Jul 2023 17:18:19 +0000 (18:18 +0100)]
xen-block: Avoid leaks on new error path
Commit 189829399070 ("xen-block: Use specific blockdev driver")
introduced a new error path, without taking care of allocated
resources.
So only allocate the qdicts after the error check, and free both
`filename` and `driver` when we are about to return and thus taking
care of both success and error path.
Coverity only spotted the leak of qdicts (*_layer variables).
Reported-by: Peter Maydell <peter.maydell@linaro.org> Fixes: Coverity CID 1508722, 1398649 Fixes: 189829399070 ("xen-block: Use specific blockdev driver") Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230704171819.42564-1-anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
David Woodhouse [Tue, 20 Jun 2023 17:58:55 +0000 (18:58 +0100)]
hw/xen: Clarify (lack of) error handling in transaction_commit()
Coverity was unhappy (CID 1508359) because we didn't check the return of
init_walk_op() in transaction_commit(), despite doing so at every other
call site.
Strictly speaking, this is a false positive since it can never fail. It
only fails for invalid user input (transaction ID or path), and both of
those are hard-coded to known sane values in this invocation.
But Coverity doesn't know that, and neither does the casual reader of the
code.
Returning an error here would be weird, since the transaction *is*
committed by this point; all the walk_op is doing is firing watches on
the newly-committed changed nodes. So make it a g_assert(!ret), since
it really should never happen.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20076888f6bdf06a65aafc5cf954260965d45b97.camel@infradead.org> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
* tag 'pull-tcg-20230731' of https://gitlab.com/rth7680/qemu:
target/s390x: Move trans_exc_code update to do_program_interrupt
linux-user/armeb: Fix __kernel_cmpxchg() for armeb
target/ppc: Disable goto_tb with architectural singlestep
bsd-user: Specify host page alignment if none specified
bsd-user: Allocate guest virtual address space
accel/tcg: Clear tcg_ctx->gen_tb on buffer overflow
util/interval-tree: Use qatomic_read/set for rb_parent_color
util/interval-tree: Introduce pc_parent
util/interval-tree: Use qatomic_set_mb in rb_link_node
util/interval-tree: Use qatomic_read for left/right while searching
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 28 Jul 2023 19:53:59 +0000 (12:53 -0700)]
target/s390x: Move trans_exc_code update to do_program_interrupt
This solves a problem in which the store to LowCore during tlb_fill
triggers a clean-page TB invalidation for page0 during translation,
which results in an assertion failure for locked pages.
By delaying the store until after the exception has been raised,
we will have unwound the pages locked for translation and the
problem does not arise. There are plenty of other updates to
LowCore while delivering an interrupt/exception; trans_exc_code
does not need to be special.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
linux-user/armeb: Fix __kernel_cmpxchg() for armeb
Commit 7f4f0d9ea870 ("linux-user/arm: Implement __kernel_cmpxchg with host
atomics") switched to use qatomic_cmpxchg() to swap a word with the memory
content, but missed to endianess-swap the oldval and newval values when
emulating an armeb CPU, which expects words to be stored in big endian in
the guest memory.
The bug can be verified with qemu >= v7.0 on any little-endian host, when
starting the armeb binary of the upx program, which just hangs without
this patch.
Cc: qemu-stable@nongnu.org Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: "Markus F.X.J. Oberhumer" <markus@oberhumer.com> Reported-by: John Reiser <jreiser@BitWagon.com> Closes: https://github.com/upx/upx/issues/687
Message-Id: <ZMQVnqY+F+5sTNFd@p100> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 28 Jul 2023 17:22:52 +0000 (10:22 -0700)]
target/ppc: Disable goto_tb with architectural singlestep
The change to use translator_use_goto_tb went too far, as the
CF_SINGLE_STEP flag managed by the translator only handles
gdb single stepping and not the architectural single stepping
modeled in DisasContext.singlestep_enabled.
Fixes: 6e9cc373ec5 ("target/ppc: Use translator_use_goto_tb")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1795 Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Fri, 28 Jul 2023 16:29:27 +0000 (10:29 -0600)]
bsd-user: Specify host page alignment if none specified
We're hitting an assert when we pass in alignment == 0 since that's not
a power of two. so pass in the ideal page size.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230728162927.5009-1-imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Thu, 27 Jul 2023 16:11:48 +0000 (09:11 -0700)]
bsd-user: Allocate guest virtual address space
With reserved_va, mmap.c expects to have pre-allocated host address
space for the entire guest address space. When combined with the -B
command-line option, ensure that the chosen address does not overlap
anything else. Ensure that mmap_next_start is within reserved_va,
as we use it within mmap.c without checking.
Reviewed by: Warner Losh <imp@bsdimp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230727161148.444988-1-richard.henderson@linaro.org>
Richard Henderson [Wed, 26 Jul 2023 19:58:08 +0000 (12:58 -0700)]
accel/tcg: Clear tcg_ctx->gen_tb on buffer overflow
On overflow of code_gen_buffer, we unlock the guest pages we had been
translating, but failed to clear gen_tb. On restart, if we cannot
allocate a TB, we exit to the main loop to perform the flush of all
TBs as soon as possible. With garbage in gen_tb, we hit an assert:
Richard Henderson [Sat, 22 Jul 2023 14:17:38 +0000 (15:17 +0100)]
util/interval-tree: Use qatomic_read/set for rb_parent_color
While less susceptible to optimization problems than left and right,
interval_tree_iter_next also reads rb_parent(), so make sure that
stores and loads are atomic.
This goes further than technically required, changing all loads to
be atomic, rather than simply the ones in the iteration side. But
it doesn't really affect the code generation on the rebalance side
and is cleaner to handle everything the same.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sat, 22 Jul 2023 14:25:30 +0000 (15:25 +0100)]
util/interval-tree: Use qatomic_set_mb in rb_link_node
Ensure that the stores to rb_left and rb_right are complete before
inserting the new node into the tree. Otherwise a concurrent reader
could see garbage in the new leaf.
Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* tag 'pull-target-arm-20230731' of https://git.linaro.org/people/pmaydell/qemu-arm:
gdbstub: Fix client Ctrl-C handling
kvm: Fix crash due to access uninitialized kvm_state
target/arm/tcg: Don't build AArch64 decodetree files for qemu-system-arm
target/arm: Avoid writing to constant TCGv in trans_CSEL()
elf2dmp: Don't abandon when Prcb is set to 0
target/arm: Fix MemOp for STGP
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nicholas Piggin [Tue, 11 Jul 2023 08:59:03 +0000 (18:59 +1000)]
gdbstub: Fix client Ctrl-C handling
The gdb remote protocol has a special interrupt character (0x03) that is
transmitted outside the regular packet processing, and represents a
Ctrl-C pressed in the client. Despite not being a regular packet, it
does expect a regular stop response if the stub successfully stops the
running program.
Inhibiting the stop reply packet can lead to gdb client hang. So permit
a stop response when receiving a character from gdb that stops the vm.
Additionally, add a warning if that was not a 0x03 character, because
the gdb session is likely to end up getting confused if this happens.
Cc: qemu-stable@nongnu.org Fixes: 758370052fb ("gdbstub: only send stop-reply packets when allowed to") Reported-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230711085903.304496-1-npiggin@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm: Fix crash due to access uninitialized kvm_state
Runs into core dump on arm64 and the backtrace extracted from the
core dump is shown as below. It's caused by accessing uninitialized
@kvm_state in kvm_flush_coalesced_mmio_buffer() due to commit 176d073029
("hw/arm/virt: Use machine_memory_devices_init()"), where the machine's
memory region is added earlier than before.
Peter Maydell [Tue, 18 Jul 2023 10:46:28 +0000 (11:46 +0100)]
target/arm/tcg: Don't build AArch64 decodetree files for qemu-system-arm
Currently we list all the Arm decodetree files together and add them
unconditionally to arm_ss. This means we build them for both
qemu-system-aarch64 and qemu-system-arm. However, some of them are
AArch64-specific, so there is no need to build them for
qemu-system-arm. (Meson is smart enough to notice that the generated
.c.inc file is not used by any objects that go into qemu-system-arm,
so we only unnecessarily run decodetree, not anything more
heavyweight like a recompile or relink, but it's still unnecessary
work.)
Split gen into gen_a32 and gen_a64, and only add gen_a64 for
TARGET_AARCH64 compiles.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230718104628.1137734-1-peter.maydell@linaro.org
Peter Maydell [Thu, 27 Jul 2023 10:39:06 +0000 (11:39 +0100)]
target/arm: Avoid writing to constant TCGv in trans_CSEL()
In commit 0b188ea05acb5 we changed the implementation of
trans_CSEL() to use tcg_constant_i32(). However, this change
was incorrect, because the implementation of the function
sets up the TCGv_i32 rn and rm to be either zero or else
a TCG temp created in load_reg(), and these TCG temps are
then in both cases written to by the emitted TCG ops.
The result is that we hit a TCG assertion:
(or on a non-debug build, just produce a garbage result)
Adjust the code so that rn and rm are always writeable
temporaries whether the instruction is using the special
case "0" or a normal register as input.
Cc: qemu-stable@nongnu.org Fixes: 0b188ea05acb5 ("target/arm: Use tcg_constant in trans_CSEL") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230727103906.2641264-1-peter.maydell@linaro.org
Akihiko Odaki [Sun, 11 Jun 2023 03:34:34 +0000 (12:34 +0900)]
elf2dmp: Don't abandon when Prcb is set to 0
Prcb may be set to 0 for some CPUs if the dump was taken before they
start. The dump may still contain valuable information for started CPUs
so don't abandon conversion in such a case.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20230611033434.14659-1-akihiko.odaki@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Klaus Jensen [Thu, 20 Jul 2023 09:42:24 +0000 (11:42 +0200)]
hw/nvme: use stl/ldl pci dma api
Use the stl/ldl pci dma api for writing/reading doorbells. This removes
the explicit endian conversions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
block/blkio: use blkio_set_int("fd") to check fd support
block/blkio: fall back on using `path` when `fd` setting fails
block/blkio: retry blkio_connect() if it fails using `fd`
block/blkio: move blkio_connect() in the drivers functions
block: Fix pad_request's request restriction
block/file-posix: fix g_file_get_contents return path
block/blkio: do not use open flags in qemu_open()
block/blkio: enable the completion eventfd
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
block/blkio: use blkio_set_int("fd") to check fd support
Setting the `fd` property fails with virtio-blk-* libblkio drivers
that do not support fd passing since
https://gitlab.com/libblkio/libblkio/-/merge_requests/208.
Getting the `fd` property, on the other hand, always succeeds for
virtio-blk-* libblkio drivers even when they don't support fd passing.
This patch switches to setting the `fd` property because it is a
better mechanism for probing fd passing support than getting the `fd`
property.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-5-sgarzare@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
block/blkio: fall back on using `path` when `fd` setting fails
qemu_open() fails if called with an unix domain socket in this way:
-blockdev node-name=drive0,driver=virtio-blk-vhost-user,path=vhost-user-blk.sock,cache.direct=on: Could not open 'vhost-user-blk.sock': No such device or address
Since virtio-blk-vhost-user does not support fd passing, let`s always fall back
on using `path` if we fail the fd passing.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk") Reported-by: Qing Wang <qinwang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-4-sgarzare@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
block/blkio: retry blkio_connect() if it fails using `fd`
libblkio 1.3.0 added support of "fd" property for virtio-blk-vhost-vdpa
driver. In QEMU, starting from commit cad2ccc395 ("block/blkio: use
qemu_open() to support fd passing for virtio-blk") we are using
`blkio_get_int(..., "fd")` to check if the "fd" property is supported
for all the virtio-blk-* driver.
Unfortunately that property is also available for those driver that do
not support it, such as virtio-blk-vhost-user.
So, `blkio_get_int()` is not enough to check whether the driver supports
the `fd` property or not. This is because the virito-blk common libblkio
driver only checks whether or not `fd` is set during `blkio_connect()`
and fails with -EINVAL for those transports that do not support it
(all except vhost-vdpa for now).
So let's handle the `blkio_connect()` failure, retrying it using `path`
directly.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk") Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-3-sgarzare@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
projects / users / dwmw2 / qemu.git / log