Merge branch 'stable/for-linus-3.4.rebased' into uek2-merge
* stable/for-linus-3.4.rebased:
drivers/video/xen-fbfront.c: add missing cleanup code
xen: correctly check for pending events when restoring irq flags
xen/smp: Fix crash when booting with ACPI hotplug CPUs.
xen: use the pirq number to check the pirq_eoi_map
We did a similar check for the P-states but did not do it for
the C-states. What we want to do is ignore cases where the DSDT
has definition for sixteen CPUs, but the machine only has eight
CPUs and we get:
xen-acpi-processor: (CX): Hypervisor error (-22) for ACPI CPU14
xen/enlighten: Disable MWAIT_LEAF so that acpi-pad won't be loaded.
There are exactly four users of __monitor and __mwait:
- cstate.c (which allows acpi_processor_ffh_cstate_enter to be called
when the cpuidle API drivers are used. However patch
"cpuidle: replace xen access to x86 pm_idle and default_idle"
provides a mechanism to disable the cpuidle and use safe_halt.
- smpboot (which allows mwait_play_dead to be called). However
safe_halt is always used so we skip that.
- intel_idle (same deal as above).
- acpi_pad.c. This the one that we do not want to run as we
will hit the below crash.
Why do we want to expose MWAIT_LEAF in the first place?
We want it for the xen-acpi-processor driver - which uploads
C-states to the hypervisor. If MWAIT_LEAF is set, the cstate.c
sets the proper address in the C-states so that the hypervisor
can benefit from using the MWAIT functionality. And that is
the sole reason for using it.
Without this patch, if a module performs mwait or monitor we
get this:
David Vrabel [Thu, 26 Apr 2012 18:44:06 +0000 (19:44 +0100)]
xen: correctly check for pending events when restoring irq flags
In xen_restore_fl_direct(), xen_force_evtchn_callback() was being
called even if no events were pending. This resulted in (depending on
workload) about a 100 times as many xen_version hypercalls as
necessary.
Fix this by correcting the sense of the conditional jump.
This seems to give a significant performance benefit for some
workloads.
There is some subtle tricksy "..since the check here is trying to
check both pending and masked in a single cmpw, but I think this is
correct. It will call check_events now only when the combined
mask+pending word is 0x0001 (aka unmasked, pending)." (Ian)
[upstream git commit 7eb7ce4d2e8991aff4ecb71a81949a907ca755ac] CC: stable@kernel.org Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen/smp: Fix crash when booting with ACPI hotplug CPUs.
When we boot on a machine that can hotplug CPUs and we
are using 'dom0_max_vcpus=X' on the Xen hypervisor line
to clip the amount of CPUs available to the initial domain,
we get this:
(XEN) Command line: com1=115200,8n1 dom0_mem=8G noreboot dom0_max_vcpus=8 sync_console mce_verbosity=verbose console=com1,vga loglvl=all guest_loglvl=all
.. snip..
DMI: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x032.072520111118 07/25/2011
.. snip.
SMP: Allowing 64 CPUs, 32 hotplug CPUs
installing Xen timer for CPU 7
cpu 7 spinlock event irq 361
NMI watchdog: disabled (cpu7): hardware events not enabled
Brought up 8 CPUs
.. snip..
[acpi processor finds the CPUs are not initialized and starts calling
arch_register_cpu, which creates /sys/devices/system/cpu/cpu8/online]
CPU 8 got hotplugged
CPU 9 got hotplugged
CPU 10 got hotplugged
.. snip..
initcall 1_acpi_battery_init_async+0x0/0x1b returned 0 after 406 usecs
calling erst_init+0x0/0x2bb @ 1
[and the scheduler sticks newly started tasks on the new CPUs, but
said CPUs cannot be initialized b/c the hypervisor has limited the
amount of vCPUS to 8 - as per the dom0_max_vcpus=8 flag.
The spinlock tries to kick the other CPU, but the structure for that
is not initialized and we crash.]
BUG: unable to handle kernel paging request at fffffffffffffed8
IP: [<ffffffff81035289>] xen_spin_lock+0x29/0x60
PGD 180d067 PUD 180e067 PMD 0
Oops: 0002 [#1] SMP
CPU 7
Modules linked in:
xen: use the pirq number to check the pirq_eoi_map
In pirq_check_eoi_map use the pirq number rather than the Linux irq
number to check whether an eoi is needed in the pirq_eoi_map.
The reason is that the irq number is not always identical to the
pirq number so if we wrongly use the irq number to check the
pirq_eoi_map we are going to check for the wrong pirq to EOI.
As a consequence some interrupts might not be EOI'ed by the
guest correctly.
[upstream git commit 521394e4e679996955bc351cb6b64639751db2ff] Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Tobias Geiger <tobias.geiger@vido.info>
[v1: Added some extra wording to git commit] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Merge branch 'stable/for-linus-3.4.rebased' into uek2-merge
* stable/for-linus-3.4.rebased: (29 commits)
xen/blkback: Fix warning error.
xen/blkback: Make optional features be really optional.
xen-blkfront: module exit handling adjustments
xen-blkfront: properly name all devices
xen-blkfront: set pages are FOREIGN_FRAME when sharing them
xen: EXPORT_SYMBOL set_phys_to_machine
xen-blkfront: make blkif_io_lock spinlock per-device
xen/blkfront: don't put bdev right after getting it
xen-blkfront: use bitmap_set() and bitmap_clear()
xen/blkback: Enable blkback on HVM guests
xen/blkback: use grant-table.c hypercall wrappers
xen/p2m: m2p_find_override: use list_for_each_entry_safe
xen/gntdev: do not set VM_PFNMAP
xen/grant-table: add error-handling code on failure of gnttab_resume
xen: only check xen_platform_pci_unplug if hvm
xen: initialize platform-pci even if xen_emul_unplug=never
xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps
xen: support pirq_eoi_map
xen/smp: Remove unnecessary call to smp_processor_id()
xen/smp: Fix bringup bug in AP code.
...
drivers/block/xen-blkback/xenbus.c: In function 'xen_blkbk_discard':
drivers/block/xen-blkback/xenbus.c:419:4: warning: passing argument 1 of 'dev_warn' makes pointer from integer without a cast
+[enabled by default]
include/linux/device.h:894:5: note: expected 'const struct device *' but argument is of type 'long int'
It is unclear how that mistake made it in. It surely is wrong.
[upstream git commit a71e23d] Acked-by: Jens Axboe <axboe@kernel.dk> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Conflicts:
Konrad Rzeszutek Wilk [Wed, 14 Mar 2012 17:04:00 +0000 (13:04 -0400)]
xen/blkback: Make optional features be really optional.
They were using the xenbus_dev_fatal() function which would
change the state of the connection immediately. Which is not
what we want when we advertise optional features.
So make 'feature-discard','feature-barrier','feature-flush-cache'
optional.
[upstream git commit 3389bb8] Suggested-by: Jan Beulich <JBeulich@suse.com>
[v1: Made the discard function void and static] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Conflicts:
Merge branch 'stable/xen-network-3.3.rebase' into uek2-merge
* stable/xen-network-3.3.rebase:
xen-netback: make ops structs const
netback: fix typo in comment
netback: remove redundant assignment
netback: Fix alert message.
xen-netback: use correct index for invalidation in xen_netbk_tx_check_gop()
net: xen-netback: correctly restart Tx after a VM restore/migrate
xen/netback: Add module alias for autoloading
Jan Beulich [Thu, 5 Apr 2012 15:04:52 +0000 (16:04 +0100)]
xen-blkfront: module exit handling adjustments
The blkdev major must be released upon exit, or else the module can't
attach to devices using the same majors upon being loaded again. Also
avoid leaking the minor tracking bitmap.
[upstream git commit 4e55b3c] Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jan Beulich [Thu, 5 Apr 2012 15:37:22 +0000 (16:37 +0100)]
xen-blkfront: properly name all devices
- devices beyond xvdzz didn't get proper names assigned at all
- extended devices with minors not representable within the kernel's
major/minor bit split spilled into foreign majors
[upstream git commit 85b6984] Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen-blkfront: set pages are FOREIGN_FRAME when sharing them
Set pages as FOREIGN_FRAME whenever blkfront shares them with another
domain. Then when blkfront un-share them, also removes the
FOREIGN_FRAME_BIT from the p2m.
We do it so that when the source and the destination domain are the same
(blkfront connected to a disk backend in the same domain) we can more easily
recognize which ones are the source pfns and which ones are the
destination pfns (both are going to be pointing to the same mfns).
Without this patch enstablishing a connection between blkfront and QEMU
qdisk in the same domain causes QEMU to hang and never return.
The scenario where this used is when a disk image in QCOW2 is used
for extracting the kernel and initrd image. The QCOW2 image file cannot
be loopback-ed and to run 'pygrub', the weird scaffolding of:
- setup QEMU and qdisk with the qcow2 image [disk backend]
- setup xen-blkfront mounting said disk backend in the domain.
- extract kernel and initrd
- tear it down.
The MFNs shared shared by the frontend are going to back two
different sets of PFNs: the original PFNs allocated by the frontend and
the new ones allocated by gntdev for the backend.
The problem is that when Linux calls mfn_to_pfn, passing as argument
one of the MFN shared by the frontend, we want to get the PFN returned by
m2p_find_override_pfn (that is the PFN setup by gntdev) but actually we
get the original PFN allocated by the frontend because considering that
the frontend and the backend are in the same domain:
One possible solution would be to always call m2p_find_override_pfn to
check out whether we have an entry for a given MFN. However it is not
very efficient or scalable.
The other option (that this patch is implementing) is to mark the pages
shared by the frontend as "foreign", so that mfn != mfn2.
It makes sense because from the frontend point of view they are donated
to the backend and while so they are not supposed to be used by the
frontend. In a way, they don't belong to the frontend anymore, at least
temporarily.
[upstream git commit 6a2c6177]
[v3: only set_phys_to_machine if xen_pv_domain] Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
[v1: Redid description a bit] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Steven Noonan [Fri, 17 Feb 2012 20:04:44 +0000 (12:04 -0800)]
xen-blkfront: make blkif_io_lock spinlock per-device
This patch moves the global blkif_io_lock to the per-device structure. The
spinlock seems to exists for two reasons: to disable IRQs when in the interrupt
handlers for blkfront, and to protect the blkfront VBDs when a detachment is
requested.
Having a global blkif_io_lock doesn't make sense given the use case, and it
drastically hinders performance due to contention. All VBDs with pending IOs
have to take the lock in order to get work done, which serializes everything
pretty badly.
[upstream git commit 3467811] Signed-off-by: Steven Noonan <snoonan@amazon.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Andrew Jones [Thu, 16 Feb 2012 12:16:25 +0000 (13:16 +0100)]
xen/blkfront: don't put bdev right after getting it
We should hang onto bdev until we're done with it.
[upstream git commit dad5cf6] Signed-off-by: Andrew Jones <drjones@redhat.com>
[v1: Fixed up git commit description] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Since we are using the m2p_override we do have struct pages
corresponding to the user vma mmap'ed by gntdev.
Removing the VM_PFNMAP flag makes get_user_pages work on that vma.
An example test case would be using a Xen userspace block backend
(QDISK) on a file on NFS using O_DIRECT.
Igor Mammedov [Tue, 27 Mar 2012 17:31:08 +0000 (19:31 +0200)]
xen: only check xen_platform_pci_unplug if hvm
commit b9136d207f08
xen: initialize platform-pci even if xen_emul_unplug=never
breaks blkfront/netfront by not loading them because of
xen_platform_pci_unplug=0 and it is never set for PV guest.
[upstream git commit e95ae5a] Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Igor Mammedov [Wed, 21 Mar 2012 14:08:38 +0000 (15:08 +0100)]
xen: initialize platform-pci even if xen_emul_unplug=never
When xen_emul_unplug=never is specified on kernel command line
reading files from /sys/hypervisor is broken (returns -EBUSY).
It is caused by xen_bus dependency on platform-pci and
platform-pci isn't initialized when xen_emul_unplug=never is
specified.
Fix it by allowing platform-pci to ignore xen_emul_unplug=never,
and do not intialize xen_[blk|net]front instead.
[upstream git commit b9136d2] Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Andrew Jones [Fri, 6 Jan 2012 09:43:09 +0000 (10:43 +0100)]
xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps
PV-on-HVM guests may want to use the xen keyboard/mouse frontend, but
they don't use the xen frame buffer frontend. For this case it doesn't
make much sense for INPUT_XEN_KBDDEV_FRONTEND to depend on
XEN_FBDEV_FRONTEND. The opposite direction always makes more sense, i.e.
if you're using xenfb, then you'll want xenkbd. Switch the dependencies.
[upstream git commit 4bc25af] Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Stefano Stabellini [Mon, 30 Jan 2012 16:21:48 +0000 (16:21 +0000)]
xen: support pirq_eoi_map
The pirq_eoi_map is a bitmap offered by Xen to check which pirqs need to
be EOI'd without having to issue an hypercall every time.
We use PHYSDEVOP_pirq_eoi_gmfn_v2 to map the bitmap, then if we
succeed we use pirq_eoi_map to check whether pirqs need eoi.
Changes in v3:
- explicitly use PHYSDEVOP_pirq_eoi_gmfn_v2 rather than
PHYSDEVOP_pirq_eoi_gmfn;
- introduce pirq_check_eoi_map, a function to check if a pirq needs an
eoi using the map;
-rename pirq_needs_eoi into pirq_needs_eoi_flag;
- introduce a function pointer called pirq_needs_eoi that is going to be
set to the right implementation depending on the availability of
PHYSDEVOP_pirq_eoi_gmfn_v2.
Stefano Stabellini [Tue, 13 Mar 2012 18:30:44 +0000 (18:30 +0000)]
xen/xenbus: ignore console/0
Unfortunately xend creates a bogus console/0 frotend/backend entry pair
on xenstore that console backends cannot properly cope with.
Any guest behavior that is not completely ignoring console/0 is going
to either cause problems with xenconsoled or qemu.
Returning 0 or -ENODEV from xencons_probe is not enough because it is
going to cause the frontend state to become 4 or 6 respectively.
The best possible thing we can do here is just ignore the entry from
xenbus_probe_frontend.
Stefano Stabellini [Mon, 30 Jan 2012 16:02:31 +0000 (16:02 +0000)]
hvc_xen: implement multiconsole support
This patch implements support for multiple consoles:
consoles other than the first one are setup using the traditional xenbus
and grant-table based mechanism.
We use a list to keep track of the allocated consoles, we don't
expect too many of them anyway.
Changes in v3:
- call hvc_remove before removing the console from xenconsoles;
- do not lock xencons_lock twice in the destruction path;
- use the DEFINE_XENBUS_DRIVER macro.
Alex Shi [Fri, 13 Jan 2012 15:53:35 +0000 (23:53 +0800)]
xen: use this_cpu_xxx replace percpu_xxx funcs
percpu_xxx funcs are duplicated with this_cpu_xxx funcs, so replace them
for further code clean up.
I don't know much of xen code. But, since the code is in x86 architecture,
the percpu_xxx is exactly same as this_cpu_xxx serials functions. So, the
change is safe.
[upstream git commit 2113f46] Signed-off-by: Alex Shi <alex.shi@intel.com> Acked-by: Christoph Lameter <cl@gentwo.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jan Beulich [Mon, 5 Mar 2012 17:11:31 +0000 (17:11 +0000)]
xenbus: don't free other end details too early
The individual drivers' remove functions could legitimately attempt to
access this information (for logging messages if nothing else). Note
that I did not in fact observe a problem anywhere, but I came across
this while looking into the reasons for what turned out to need the
fix at https://lkml.org/lkml/2012/3/5/336 to vsprintf().
[upstream git commit bd0d5aa] Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
linux/drivers/xen/manage.c: In function 'do_suspend':
linux/drivers/xen/manage.c:160:5: warning: 'si.cancelled' may be used uninitialized in this function
[git upstream commit 186bab1] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Conflicts:
xen/xenbus: Add quirk to deal with misconfigured backends.
A rather annoying and common case is when booting a PVonHVM guest
and exposing the PV KBD and PV VFB - as broken toolstacks don't
always initialize the backends correctly.
Normally The HVM guest is using the VGA driver and the emulated
keyboard for this (though upstream version of QEMU implements
PV KBD, but still uses a VGA driver). We provide a very basic
two-stage wait mechanism - where we wait for 30 seconds for all
devices, and then for 270 for all them except the two mentioned.
That allows us to wait for the essential devices, like network
or disk for the full 6 minutes.
To trigger this, put this in your guest config:
vfb = [ 'vnc=1, vnclisten=0.0.0.0 ,vncunused=1']
instead of this:
vnc=1
vnclisten="0.0.0.0"
[upstream git commit 3066616] CC: stable@kernel.org Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
[v3: Split delay in non-essential (30 seconds) and essential
devices per Ian and Stefano suggestion]
[v4: Added comments per Stefano suggestion] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Merge branch 'stable/xen-pciback-0.6.3.bugfixes' into uek2-merge
* stable/xen-pciback-0.6.3.bugfixes:
xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success
xen/pciback: fix XEN_PCI_OP_enable_msix result
xen/pciback: Support pci_reset_function, aka FLR or D3 support.
PCI: Introduce __pci_reset_function_locked to be used when holding device_lock.
The original XenoLinux code has always had things this way, and for
compatibility reasons (in particular with a subsequent pciback
adjustment) upstream Linux should behave the same way (allowing for two
distinct error indications to be returned by the backend).
[upstream git commit f09d843] Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jan Beulich [Mon, 2 Apr 2012 14:32:22 +0000 (15:32 +0100)]
xen/pciback: fix XEN_PCI_OP_enable_msix result
Prior to 2.6.19 and as of 2.6.31, pci_enable_msix() can return a
positive value to indicate the number of vectors (less than the amount
requested) that can be set up for a given device. Returning this as an
operation value (secondary result) is fine, but (primary) operation
results are expected to be negative (error) or zero (success) according
to the protocol. With the frontend fixed to match the XenoLinux
behavior, the backend can now validly return zero (success) here,
passing the upper limit on the number of vectors in op->value.
[upstream git commit 0ee46ec] Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Thu, 12 Jan 2012 17:06:47 +0000 (12:06 -0500)]
xen/pciback: Support pci_reset_function, aka FLR or D3 support.
We use the __pci_reset_function_locked to perform the action.
Also on attaching ("bind") and detaching ("unbind") we save and
restore the configuration states. When the device is disconnected
from a guest we use the "pci_reset_function" to also reset the
device before being passed to another guest.
and ends up calling:
driver_bind:
device_lock(dev); <=== TAKES LOCK
XXXX_probe:
.. pci_enable_device()
...__pci_reset_function(), which calls
pci_dev_reset(dev, 0):
if (!0) {
device_lock(dev) <==== DEADLOCK
The __pci_reset_function_locked function allows the the drivers
'probe' function to call the "pci_reset_function" while still holding
the driver mutex lock.
Konrad Rzeszutek Wilk [Sat, 24 Mar 2012 13:18:57 +0000 (09:18 -0400)]
xen/acpi: Fix Kconfig dependency on CPU_FREQ
The functions: "acpi_processor_*" sound like they depend on CONFIG_ACPI_PROCESSOR
but in reality they are exposed when CONFIG_CPU_FREQ=[y|m]. As such
update the Kconfig to have this dependency and fix compile issues:
Konrad Rzeszutek Wilk [Tue, 13 Mar 2012 17:28:12 +0000 (13:28 -0400)]
xen/acpi-processor: Do not depend on CPU frequency scaling drivers.
With patch "xen/cpufreq: Disable the cpu frequency scaling drivers
from loading." we do not have to worry about said drivers loading
themselves before the xen-acpi-processor driver. Hence we can remove
the default selection (=y if CPU frequency drivers were built-in, or
=m if CPU frequency drivers were built as modules), and just
select =m for the default case.
[git commit 102b208] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Wed, 14 Mar 2012 00:06:57 +0000 (20:06 -0400)]
xen/cpufreq: Disable the cpu frequency scaling drivers from loading.
By using the functionality provided by "[CPUFREQ]: provide
disable_cpuidle() function to disable the API."
Under the Xen hypervisor we do not want the initial domain to exercise
the cpufreq scaling drivers. This is b/c the Xen hypervisor is
in charge of doing this as well and we can end up with both the
Linux kernel and the hypervisor trying to change the P-states
leading to weird performance issues.
[upstream 48cdd82] Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Fix compile error spotted by Benjamin Schweikert <b.schweikert@googlemail.com>]
Merge branch 'stable/not-upstreamed' into uek2-merge
* stable/not-upstreamed:
Xen: Export host physical CPU information to dom0
xen/mce: Change the machine check point
Add mcelog support from xen platform
mismerged the Makefile. The end result that the line
obj-$(CONFIG_XEN_PVHVM) += platform_pci.o was removed
leading to no PVonHVM driver to tell QEMU to unplug the device.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
x86/PCI: reduce severity of host bridge window conflict warnings
Host bridge windows are top-level resources, so if we find a host bridge
window conflict, it's probably with a hard-coded legacy reservation.
Moving host bridge windows is theoretically possible, but we don't support
it; we just ignore windows with conflicts, and it's not worth making this
a user-visible error.
Konrad Rzeszutek Wilk [Tue, 13 Mar 2012 22:05:58 +0000 (18:05 -0400)]
xen/blkback: Disable DISCARD support for loopback device (but leave for phy).
Until we back-port the changes from 3.3 which alter the loopback device
to support the full gamma of discard attributes. Otherwise we have to
punch through loop device to retrieve the underlaying disk size and
do other nasty things to get the proper information.
Also there is the outstanding issue that Logical Volumes won't pass
through the DISCARD support, so in most cases we can't take advantage of
this code until that gets fixed.
Fixes Oracle BZ#13779884 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Mike Snitzer [Wed, 6 Jul 2011 19:30:50 +0000 (21:30 +0200)]
block: eliminate potential for infinite loop in blkdev_issue_discard
Due to the recently identified overflow in read_capacity_16() it was
possible for max_discard_sectors to be zero but still have discards
enabled on the associated device's queue.
Eliminate the possibility for blkdev_issue_discard to infinitely loop.
Interestingly this issue wasn't identified until a device, whose
discard_granularity was 0 due to read_capacity_16 overflow, was consumed
by blk_stack_limits() to construct limits for a higher-level DM
multipath device. The multipath device's resulting limits never had the
discard limits stacked because blk_stack_limits() will only do so if
the bottom device's discard_granularity != 0. This resulted in the
multipath device's limits.max_discard_sectors being 0.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
[Fixes Oracle BZ13779884] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk>
Konrad Rzeszutek Wilk [Wed, 14 Mar 2012 00:47:44 +0000 (20:47 -0400)]
config: Use the xen-acpi-processor instead of the cpufreq-xen driver.
The xen-acpi-processor (CONFIG_XEN_ACPI_PROCESSOR=y) is a more modern
version of the cpufreq-xen driver that can automatically inhibit
the cpufreq scaling drivers.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Fri, 3 Feb 2012 21:03:20 +0000 (16:03 -0500)]
xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.
This driver solves three problems:
1). Parse and upload ACPI0007 (or PROCESSOR_TYPE) information to the
hypervisor - aka P-states (cpufreq data).
2). Upload the the Cx state information (cpuidle data).
3). Inhibit CPU frequency scaling drivers from loading.
The reason for wanting to solve 1) and 2) is such that the Xen hypervisor
is the only one that knows the CPU usage of different guests and can
make the proper decision of when to put CPUs and packages in proper states.
Unfortunately the hypervisor has no support to parse ACPI DSDT tables, hence it
needs help from the initial domain to provide this information. The reason
for 3) is that we do not want the initial domain to change P-states while the
hypervisor is doing it as well - it causes rather some funny cases of P-states
transitions.
For this to work, the driver parses the Power Management data and uploads said
information to the Xen hypervisor. It also calls acpi_processor_notify_smm()
to inhibit the other CPU frequency scaling drivers from being loaded.
Everything revolves around the 'struct acpi_processor' structure which
gets updated during the bootup cycle in different stages. At the startup, when
the ACPI parser starts, the C-state information is processed (processor_idle)
and saved in said structure as 'power' element. Later on, the CPU frequency
scaling driver (powernow-k8 or acpi_cpufreq), would call the the
acpi_processor_* (processor_perflib functions) to parse P-states information
and populate in the said structure the 'performance' element.
Since we do not want the CPU frequency scaling drivers from loading
we have to call the acpi_processor_* functions to parse the P-states and
call "acpi_processor_notify_smm" to stop them from loading.
There is also one oddity in this driver which is that under Xen, the
physical online CPU count can be different from the virtual online CPU count.
Meaning that the macros 'for_[online|possible]_cpu' would process only
up to virtual online CPU count. We on the other hand want to process
the full amount of physical CPUs. For that, the driver checks if the ACPI IDs
count is different from the APIC ID count - which can happen if the user
choose to use dom0_max_vcpu argument. In such a case a backup of the PM
structure is used and uploaded to the hypervisor.
[v1-v2: Initial RFC implementations that were posted]
[v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>]
[v4: Added vCPU != pCPU support - aka dom0_max_vcpus support]
[v5: Cleaned up the driver, fix bug under Athlon XP]
[v6: Changed the driver to a CPU frequency governor]
[v7: Jan Beulich <jbeulich@suse.com> suggestion to make it a cpufreq scaling driver
made me rework it as driver that inhibits cpufreq scaling driver]
[v8: Per Jan's review comments, fixed up the driver] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Conflicts:
Konrad Rzeszutek Wilk [Mon, 27 Feb 2012 01:08:48 +0000 (20:08 -0500)]
Merge branch 'stable/cpufreq-xen.v6.rebased' into uek2-merge
* stable/cpufreq-xen.v6.rebased:
[CPUFREQ] xen: governor for Xen hypervisor frequency scaling.
xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it.
Konrad Rzeszutek Wilk [Fri, 3 Feb 2012 21:03:20 +0000 (16:03 -0500)]
[CPUFREQ] xen: governor for Xen hypervisor frequency scaling.
This CPU freq governor leaves the frequency decision to the Xen hypervisor.
To do that the driver parses the Power Management data and uploads said
information to the Xen hypervisor. Then the Xen hypervisor can select the
proper Cx and Pxx states for the initial domain and all other domains.
To upload the information, this CPU frequency driver reads Power Management (PM)
(_Pxx and _Cx) which are populated in the 'struct acpi_processor' structure.
It simply reads the contents of that structure and pass it up the Xen hypervisor.
For that to work we depend on the appropriate CPU frequency scaling driver
to do the heavy-lifting - so that the contents is correct.
The CPU frequency governor it has been loaded also sets up a timer
to check if the ACPI IDs count is different from the APIC ID count - which
can happen if the user choose to use dom0_max_vcpu argument. In such a case
a backup of the PM structure is used and uploaded to the hypervisor.
[v1-v2: Initial RFC implementations that were posted]
[v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>]
[v4: Added vCPU != pCPU support - aka dom0_max_vcpus support]
[v5: Cleaned up the driver, fix bug under Athlon XP]
[v6: Changed the driver to a CPU frequency governor] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Conflicts:
Konrad Rzeszutek Wilk [Tue, 14 Feb 2012 03:26:32 +0000 (22:26 -0500)]
xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it.
For the hypervisor to take advantage of the MWAIT support it needs
to extract from the ACPI _CST the register address. But the
hypervisor does not have the support to parse DSDT so it relies on
the initial domain (dom0) to parse the ACPI Power Management information
and push it up to the hypervisor. The pushing of the data is done
by the processor_harveset_xen module which parses the information that
the ACPI parser has graciously exposed in 'struct acpi_processor'.
For the ACPI parser to also expose the Cx states for MWAIT, we need
to expose the MWAIT capability (leaf 1). Furthermore we also need to
expose the MWAIT_LEAF capability (leaf 5) for cstate.c to properly
function.
The hypervisor could expose these flags when it traps the XEN_EMULATE_PREFIX
operations, but it can't do it since it needs to be backwards compatible.
Instead we choose to use the native CPUID to figure out if the MWAIT
capability exists and use the XEN_SET_PDC query hypercall to figure out
if the hypervisor wants us to expose the MWAIT_LEAF capability or not.
Note: The XEN_SET_PDC query was implemented in c/s 23783:
"ACPI: add _PDC input override mechanism".
With this in place, instead of
C3 ACPI IOPORT 415
we get now
C3:ACPI FFH INTEL MWAIT 0x20
Note: The cpu_idle which would be calling the mwait variants for idling
never gets set b/c we set the default pm_idle to be the hypercall variant.
Acked-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Fri, 24 Feb 2012 05:35:13 +0000 (00:35 -0500)]
Merge branch 'stable/not-upstreamed' into uek2-merge
* stable/not-upstreamed:
Xen: Export host physical CPU information to dom0
xen/mce: Change the machine check point
Add mcelog support from xen platform
When a MCE/CMCI error happens (or by polling), the related error
information will be sent to privileged pv-ops domain by XEN. This
patch will help to fetch the xen-logged information by hypercall
and then convert XEN-format log into Linux format MCELOG. It makes
using current available mcelog tools for native Linux possible.
With this patch, after mce/cmci error log information is sent to
pv-ops guest, Running mcelog tools in the guest, you will get same
detailed decoded mce information as in Native Linux.
Nathanael Rensen [Tue, 7 Feb 2012 05:50:24 +0000 (13:50 +0800)]
usb: xen pvusb driver
Port the original Xen PV USB drivers developed by Noboru Iwamatsu
<n_iwamatsu@jp.fujitsu.com> to the Linux pvops kernel. The backend driver
resides in dom0 with access to the physical USB device. The frontend driver
resides in a domU to provide paravirtualised access to physical USB devices.
For usage, see http://wiki.xensource.com/xenwiki/XenUSBPassthrough.
Signed-off-by: Nathanael Rensen <nathanael@polymorpheus.com>. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Conflicts:
Note: The approach in upstream is to get rid of the microcode
driver altogether and do at early bootup. Even as early as
syslinux/pxeboot or initial kernel image. But those patches
are not yet ready.
Konrad Rzeszutek Wilk [Fri, 24 Feb 2012 04:54:01 +0000 (23:54 -0500)]
Merge branch 'devel/acpi-s3.v4.rebased' into uek2-merge
* devel/acpi-s3.v4.rebased:
xen/pci:use hypercall PHYSDEVOP_restore_msi_ext to restore MSI/MSI-X vectors
xen/acpi/sleep: Register to the acpi_suspend_lowlevel a callback.
xen/acpi/sleep: Enable ACPI sleep via the __acpi_override_sleep
xen/acpi: Domain0 acpi parser related platform hypercall
xen: Utilize the restore_msi_irqs hook.
x86/acpi/sleep: Provide registration for acpi_suspend_lowlevel.
x86, acpi, tboot: Have a ACPI sleep override instead of calling tboot_sleep.
x86: Expand the x86_msi_ops to have a restore MSIs.
Konrad Rzeszutek Wilk [Fri, 24 Feb 2012 04:49:59 +0000 (23:49 -0500)]
Merge branch 'stable/processor-passthru.v5.rebased' into uek2-merge
* stable/processor-passthru.v5.rebased:
xen/processor-passthru: Provide an driver that passes struct acpi_processor data to the hypervisor.
xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it.
xen/setup/pm/acpi: Remove the call to boot_option_idle_override.
xen/acpi: Domain0 acpi parser related platform hypercall
xen/pm_idle: Make pm_idle be default_idle under Xen.
cpuidle: stop depending on pm_idle
cpuidle: replace xen access to x86 pm_idle and default_idle
cpuidle: create bootparam "cpuidle.off=1"
Konrad Rzeszutek Wilk [Fri, 24 Feb 2012 04:47:20 +0000 (23:47 -0500)]
xen/processor-passthru: Provide an driver that passes struct acpi_processor data to the hypervisor.
The ACPI processor processes the _Pxx and the _Cx state information
which are populated in the 'struct acpi_processor' per-cpu structure.
We read the contents of that structure and pass it up the Xen hypervisor.
The ACPI processor along with the CPU freq driver does all the heavy-lifting
for us (filtering, calling ACPI functions, etc) so that the contents is correct.
After we are done parsing the information, we wait in case of hotplug CPUs
get loaded and then pass that information to the hypervisor.
[v1-v2: Initial RFC implementations that were posted]
[v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>]
[v4: Added vCPU != pCPU support - aka dom0_max_vcpus support]
[v5: Cleaned up the driver, fix bug under Athlon XP] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Conflicts:
Konrad Rzeszutek Wilk [Tue, 14 Feb 2012 03:26:32 +0000 (22:26 -0500)]
xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it.
For the hypervisor to take advantage of the MWAIT support it needs
to extract from the ACPI _CST the register address. But the
hypervisor does not have the support to parse DSDT so it relies on
the initial domain (dom0) to parse the ACPI Power Management information
and push it up to the hypervisor. The pushing of the data is done
by the processor_harveset_xen module which parses the information that
the ACPI parser has graciously exposed in 'struct acpi_processor'.
For the ACPI parser to also expose the Cx states for MWAIT, we need
to expose the MWAIT capability (leaf 1). Furthermore we also need to
expose the MWAIT_LEAF capability (leaf 5) for cstate.c to properly
function.
The hypervisor could expose these flags when it traps the XEN_EMULATE_PREFIX
operations, but it can't do it since it needs to be backwards compatible.
Instead we choose to use the native CPUID to figure out if the MWAIT
capability exists and use the XEN_SET_PDC query hypercall to figure out
if the hypervisor wants us to expose the MWAIT_LEAF capability or not.
Note: The XEN_SET_PDC query was implemented in c/s 23783:
"ACPI: add _PDC input override mechanism".
With this in place, instead of
C3 ACPI IOPORT 415
we get now
C3:ACPI FFH INTEL MWAIT 0x20
Note: The cpu_idle which would be calling the mwait variants for idling
never gets set b/c we set the default pm_idle to be the hypercall variant.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Yu Ke [Wed, 24 Mar 2010 18:01:13 +0000 (11:01 -0700)]
xen/acpi: Domain0 acpi parser related platform hypercall
This patches implements the xen_platform_op hypercall, to pass the parsed
ACPI info to hypervisor.
Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Tian Kevin <kevin.tian@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[v1: Added DEFINE_GUEST.. in appropiate headers]
[v2: Ripped out typedefs] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Mon, 21 Nov 2011 23:02:02 +0000 (18:02 -0500)]
xen/pm_idle: Make pm_idle be default_idle under Xen.
The idea behind commit d91ee5863b71 ("cpuidle: replace xen access to x86
pm_idle and default_idle") was to have one call - disable_cpuidle()
which would make pm_idle not be molested by other code. It disallows
cpuidle_idle_call to be set to pm_idle (which is excellent).
But in the select_idle_routine() and idle_setup(), the pm_idle can still
be set to either: amd_e400_idle, mwait_idle or default_idle. This
depends on some CPU flags (MWAIT) and in AMD case on the type of CPU.
In case of mwait_idle we can hit some instances where the hypervisor
(Amazon EC2 specifically) sets the MWAIT and we get:
In the case of amd_e400_idle we don't get so spectacular crashes, but we
do end up making an MSR which is trapped in the hypervisor, and then
follow it up with a yield hypercall. Meaning we end up going to
hypervisor twice instead of just once.
The previous behavior before v3.0 was that pm_idle was set to
default_idle regardless of select_idle_routine/idle_setup.
We want to do that, but only for one specific case: Xen. This patch
does that.
Fixes RH BZ #739499 and Ubuntu #881076 Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cc: Kevin Hilman <khilman@deeprootsystems.com>
cc: Paul Mundt <lethal@linux-sh.org>
cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 1 Apr 2011 22:28:35 +0000 (18:28 -0400)]
cpuidle: replace xen access to x86 pm_idle and default_idle
When a Xen Dom0 kernel boots on a hypervisor, it gets access
to the raw-hardware ACPI tables. While it parses the idle tables
for the hypervisor's beneift, it uses HLT for its own idle.
Rather than have xen scribble on pm_idle and access default_idle,
have it simply disable_cpuidle() so acpi_idle will not load and
architecture default HLT will be used.
cc: xen-devel@lists.xensource.com Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Jeremy Fitzhardinge [Sat, 28 Mar 2009 00:39:15 +0000 (17:39 -0700)]
xen: add CPU microcode update driver
Xen does all the hard work for us, including choosing the right update
method for this cpu type and actually doing it for all cpus. We just
need to supply it with the firmware blob.
Because Xen updates all CPUs (and the kernel's virtual cpu numbers have
no fixed relationship with the underlying physical cpus), we only bother
doing anything for cpu "0".
[ Impact: allow CPU microcode update in Xen dom0 ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Yu Ke [Wed, 24 Mar 2010 18:01:13 +0000 (11:01 -0700)]
xen/acpi: Domain0 acpi parser related platform hypercall
This patches implements the xen_platform_op hypercall, to pass the parsed
ACPI info to hypervisor.
Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Tian Kevin <kevin.tian@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[v1: Added DEFINE_GUEST.. in appropiate headers]
[v2: Ripped out typedefs] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Wed, 15 Feb 2012 15:48:39 +0000 (10:48 -0500)]
Merge branch 'stable/bug.fixes-3.3.rebased' into uek2-merge
* stable/bug.fixes-3.3.rebased:
xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback
xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic.
xen/bootup: During bootup suppress XENBUS: Unable to read cpu state
The reason for this should be obvious from this call-chain:
cpu_bringup_and_idle:
\- cpu_bringup
| \-[preempt_disable]
|
|- cpu_idle
\- play_dead [assuming the user offlined the VCPU]
| \
| +- (xen_play_dead)
| \- HYPERVISOR_VCPU_off [so VCPU is dead, once user
| | onlines it starts from here]
| \- cpu_bringup [preempt_disable]
|
+- preempt_enable_no_reschedule()
+- schedule()
\- preempt_enable()
So we have two preempt_disble() and one preempt_enable(). Calling
preempt_enable() after the cpu_bringup() in the xen_play_dead
fixes the imbalance.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk [Wed, 1 Feb 2012 21:07:41 +0000 (16:07 -0500)]
xen/bootup: During bootup suppress XENBUS: Unable to read cpu state
When the initial domain starts, it prints (depending on the
amount of CPUs) a slew of
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
which provide no useful information - as the error is a valid
issue - but not on the initial domain. The reason is that the
XenStore is not accessible at that time (it is after all the
first guest) so the CPU hotplug watch cannot parse "availability/cpu"
attribute.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
projects / users / jedix / linux-maple.git / log