David Lechner [Mon, 24 Jun 2024 12:49:36 +0000 (15:49 +0300)]
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
This makes use of the new devm_regulator_get_enable_read_voltage()
function to reduce boilerplate code.
Error messages have changed slightly since there are now fewer places
where we print an error. The rest of the logic of selecting which
supply to use as the reference voltage remains the same.
Also 1000 is replaced by MILLI in a few places for consistency.
Signed-off-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20240624124941.113010-2-alisa.roman@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kaustabh Chakraborty [Tue, 25 Jun 2024 08:27:55 +0000 (13:57 +0530)]
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
Hard matching against the WhoAmI values isn't ideal for using devices
which are compatible with existing ones. Instead of raising an error,
issue a warning instead, thus allowing the driver to continue probing.
Guillaume Stols [Fri, 28 Jun 2024 14:48:20 +0000 (14:48 +0000)]
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
AD7606-8 is referred to as AD7606 by Analog Devices. This comment aims
to avoid confusion. Also the compatible names were not sorted by
alphabetical order.
Sean Anderson [Mon, 24 Jun 2024 17:46:00 +0000 (13:46 -0400)]
iio: Add iio_read_channel_label to inkern API
It can be convenient for other in-kernel drivers to reuse IIO channel
labels. Export the iio_read_channel_label function to allow this. The
signature is different depending on where we are calling it from, so
the meat is moved to do_iio_read_channel_label.
Olivier Moysan [Tue, 18 Jun 2024 11:59:12 +0000 (13:59 +0200)]
dt-bindings: iio: stm32: dfsdm: fix dtbs warnings on dfsdm audio port
Fix warnings on DFSDM dtbs check
Unevaluated properties are not allowed ('dfsdm-dai' was unexpected)
'port' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: 11183ac07a74 ("dt-bindings: stm32: convert dfsdm to json-schema") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240618115912.706912-1-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
David Lechner [Fri, 21 Jun 2024 22:11:52 +0000 (17:11 -0500)]
iio: adc: ltc2309: use devm_regulator_get_enable_read_voltage()
Use devm_regulator_get_enable_read_voltage() to simplify the code.
Error message is changed since there is only one error return now.
LTC2309_INTERNAL_REF_MV macro is added to make the internal reference
voltage value self-documenting.
Nuno Sa [Tue, 18 Jun 2024 13:32:06 +0000 (15:32 +0200)]
iio: imu: adis: add cleanup based lock helpers
Add two new lock helpers that make use of the cleanup guard() and
scoped_guard() macros. Thus, users won't have to worry about unlocking
which is less prone to errors and allows for simpler error paths.
Nuno Sa [Tue, 18 Jun 2024 13:32:04 +0000 (15:32 +0200)]
iio: imu: adis_buffer: split trigger handling
Split trigger handling for devices that have paging and need to
select the correct page to get the data. Although this actually
introduces more LOC, it makes the code and the locking clear. It will
also make the following move to the cleanup magic cleaner.
LIS2DS12 is an accelerometer by STMicroelectronics. It is identifiable by
its WhoAmI value 0x43.
Its register interface is not compatible with existing parts. For example:
- The full-scale values are present in register 0x20, in bits 2 and 3
(mask 0x0c). Most other supported sensors have the register address set
to 0x21, 0x23, 0x24, or 0x25. There is one sensor setting though
(bearing WhoAmI 0x3b) which has it's address set to 0x20, but the mask is
set to 0x20, not 0x0c.
- The full-scale values 2G, 4G, 8G, and 16G correspond to the register
values 0x00, 0x02, 0x03, 0x01 respectively. None of the sensor settings
have the value 0x01 associated with 16G.
João Paulo Gonçalves [Mon, 17 Jun 2024 18:39:05 +0000 (20:39 +0200)]
iio: adc: ti-ads1119: Add driver
The ADS1119 is a precision, 16-bit, analog-to-digital converter (ADC)
that features two differential or four single-ended inputs through a
flexible input multiplexer (MUX), rail-to-rail input
buffers, a programmable gain stage, a voltage reference, and an
oscillator.
Apart from normal single conversion, the driver also supports
continuous conversion mode using a triggered buffer. However, in this
mode only one channel can be scanned at a time.
Datasheet: https://www.ti.com/lit/gpn/ads1119 Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20240617183905.4685-1-francesco@dolcini.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current error handling for calls such as devm_clk_get_enabled() in
the adi-axi-dac probe() function means that, if a property such as
'clocks' (for example) is not present in the devicetree when booting a
kernel with the driver enabled, the resulting error message will be
vague, e.g.:
|adi_axi_dac 44a00000.dac: probe with driver adi_axi_dac failed with error -2
Change the devm_clk_get_enabled(), devm_regmap_init_mmio(), and
devm_iio_backend_register() checks to use dev_err_probe() with some
context for easier debugging.
After the change:
|adi_axi_dac 44a00000.dac: error -ENOENT: failed to get clock
|adi_axi_dac 44a00000.dac: probe with driver adi_axi_dac failed with error -2
Suggested-by: Nuno Sa <nuno.sa@analog.com> Tested-by: Angelo Dureghello <adureghello@baylibre.com> Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com> Link: https://patch.msgid.link/20240617151820.3337034-1-tgamblin@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dumitru Ceclan [Fri, 7 Jun 2024 14:53:15 +0000 (17:53 +0300)]
iio: adc: ad7173: Add support for AD411x devices
Add support for AD4111/AD4112/AD4114/AD4115/AD4116.
The AD411X family encompasses a series of low power, low noise, 24-bit,
sigma-delta analog-to-digital converters that offer a versatile range of
specifications.
This family of ADCs integrates an analog front end suitable for processing
both fully differential and single-ended, bipolar voltage inputs
addressing a wide array of industrial and instrumentation requirements.
- All ADCs have inputs with a precision voltage divider with a division
ratio of 10.
- AD4116 has 5 low level inputs without a voltage divider.
- AD4111 and AD4112 support current inputs (0 mA to 20 mA) using a 50ohm
shunt resistor.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240607-ad4111-v7-9-97e3855900a0@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dumitru Ceclan [Fri, 7 Jun 2024 14:53:14 +0000 (17:53 +0300)]
iio: adc: ad7173: document sampling frequency behaviour
The ADCs supported by this driver feature a sequencer that read in a
loop all the enabled chanels. When setting the individual sampling
frequency for each channel and enabling multiple channels, the effective
of each channel will be lower than the actual set value. Document this
behaviour in a comment.
Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240607-ad4111-v7-8-97e3855900a0@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dumitru Ceclan [Fri, 7 Jun 2024 14:53:13 +0000 (17:53 +0300)]
iio: adc: ad7173: refactor device info structs
Drop setting .has_temp and .has_input_buf to false in device info struct.
Drop array of device info structs and use individual structs for all;
drop models enum as no longer needed. This improves readability as the
structs are pointed directly.
Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240607-ad4111-v7-7-97e3855900a0@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dumitru Ceclan [Fri, 7 Jun 2024 14:53:12 +0000 (17:53 +0300)]
iio: adc: ad7173: add support for special inputs
Add support for selecting REF+ and REF- inputs on all models.
Add support for selecting ((AVDD1 − AVSS)/5) inputs
on supported models.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240607-ad4111-v7-6-97e3855900a0@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dumitru Ceclan [Fri, 7 Jun 2024 14:53:11 +0000 (17:53 +0300)]
iio: adc: ad7173: refactor ain and vref selection
Move validation of analog inputs and reference voltage selection to
separate functions to reduce the size of the channel config parsing
function and improve readability.
Add defines for the number of analog inputs in a channel.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240607-ad4111-v7-5-97e3855900a0@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Sigma delta ADCs with a sequencer need to disable the previously enabled
channel when reading using ad_sigma_delta_single_conversion(). This was
done manually in drivers for devices with sequencers.
This patch implements handling of single channel disabling after a
single conversion.
Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240607-ad4111-v7-3-97e3855900a0@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dumitru Ceclan [Fri, 7 Jun 2024 14:53:08 +0000 (17:53 +0300)]
dt-bindings: adc: ad7173: add support for ad411x
Add support for: AD4111, AD4112, AD4114, AD4115, AD4116.
AD411x family ADCs support a VCOM pin. The purpose of this pin is to
offer a dedicated common-mode voltage input for single-ended channels.
This pin is specified as supporting a differential channel with VIN10 on
model AD4116.
AD4111/AD4112 support current channels. Support is implemented using
single-channel and "adi,current-channel".
Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240607-ad4111-v7-2-97e3855900a0@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are ADCs that are differential but support to measure single-ended
signals on the same channels by connecting a constant voltage to the
negative input pin.
This property allows to properly define a single-ended channel that
requires two inputs to be specified. Software can use the presence of
this property to mark the channel as not differential.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240607-ad4111-v7-1-97e3855900a0@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current error handling for calls such as devm_clk_get_enabled() in
the adi-axi-adc probe() function means that, if a property such as
'clocks' (for example) is not present in the devicetree when booting a
kernel with the driver enabled, the resulting error message will be
vague, e.g.:
|adi_axi_adc 44a00000.backend: probe with driver adi_axi_adc failed with error -2
Change the devm_clk_get_enabled(), devm_regmap_init_mmio(), and
devm_iio_backend_register() checks to use dev_err_probe() with some
context for easier debugging.
After the change:
|adi_axi_adc 44a00000.backend: error -ENOENT: failed to get clock
|adi_axi_adc 44a00000.backend: probe with driver adi_axi_adc failed with error -2
Linus Torvalds [Sun, 16 Jun 2024 18:50:16 +0000 (11:50 -0700)]
Merge tag 'parisc-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"On parisc we have suffered since years from random segfaults which
seem to have been triggered due to cache inconsistencies. Those
segfaults happened more often on machines with PA8800 and PA8900 CPUs,
which have much bigger caches than the earlier machines.
Dave Anglin has worked over the last few weeks to fix this bug. His
patch has been successfully tested by various people on various
machines and with various kernels (6.6, 6.8 and 6.9), and the debian
buildd servers haven't shown a single random segfault with this patch.
Since the cache handling has been reworked, the patch is slightly
bigger than I would like in this stage, but the greatly improved
stability IMHO justifies the inclusion now"
* tag 'parisc-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Try to fix random segmentation faults in package builds
Linus Torvalds [Sun, 16 Jun 2024 18:37:38 +0000 (11:37 -0700)]
Merge tag 'i2c-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes to correctly report i2c functionality, ensuring that
I2C_FUNC_SLAVE is reported when a device operates solely as a slave
interface"
* tag 'i2c-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Fix the functionality flags of the slave-only interface
i2c: at91: Fix the functionality flags of the slave-only interface
Linus Torvalds [Sun, 16 Jun 2024 18:20:26 +0000 (11:20 -0700)]
Merge tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.10-rc4.
Included in here are:
- thunderbolt debugfs bugfix
- USB typec bugfixes
- kcov usb bugfix
- xhci bugfixes
- usb-storage bugfix
- dt-bindings bugfix
- cdc-wdm log message spam bugfix
All of these, except for the last cdc-wdm log level change, have been
in linux-next for a while with no reported problems. The cdc-wdm
bugfix has been tested by syzbot and proved to fix the reported cpu
lockup issues when the log is constantly spammed by a broken device"
* tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
xhci: Handle TD clearing for multiple streams case
xhci: Apply broken streams quirk to Etron EJ188 xHCI host
xhci: Apply reset resume quirk to Etron EJ188 xHCI host
xhci: Set correct transferred length for cancelled bulk transfers
usb-storage: alauda: Check whether the media is initialized
usb: typec: ucsi: Ack also failed Get Error commands
kcov, usb: disable interrupts in kcov_remote_start_usb_softirq
dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes
usb: typec: tcpm: Ignore received Hard Reset in TOGGLING state
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected
usb: typec: ucsi: glink: increase max ports for x1e80100
Revert "usb: chipidea: move ci_ulpi_init after the phy initialization"
thunderbolt: debugfs: Fix margin debugfs node creation condition
Linus Torvalds [Sun, 16 Jun 2024 18:05:47 +0000 (11:05 -0700)]
Merge tag 'tty-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes that resolve som
reported problems. Included in here are:
- n_tty lookahead buffer bugfix
- WARN_ON() removal where it was not needed
- 8250_dw driver bugfixes
- 8250_pxa bugfix
- sc16is7xx Kconfig fixes for reported build issues
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: drop debugging WARN_ON_ONCE() from uart_write()
serial: sc16is7xx: re-add Kconfig SPI or I2C dependency
serial: sc16is7xx: rename Kconfig CONFIG_SERIAL_SC16IS7XX_CORE
serial: port: Don't block system suspend even if bytes are left to xmit
serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level
serial: 8250_dw: Revert "Move definitions to the shared header"
serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw
tty: n_tty: Fix buffer offsets when lookahead is used
Linus Torvalds [Sun, 16 Jun 2024 17:57:05 +0000 (10:57 -0700)]
Merge tag 'staging-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix, for the vc04 driver. It resolves
a reported problem that showed up in the merge window set of changes.
It's been in linux-next for over a week with no reported problems"
* tag 'staging-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_debugfs: Fix NPD in vchiq_dump_state
Linus Torvalds [Sun, 16 Jun 2024 17:43:04 +0000 (10:43 -0700)]
Merge tag 'driver-core-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and sysfs fixes from Greg KH:
"Here are three small changes for 6.10-rc4 that resolve reported
problems, and finally drop an unused api call. These are:
- removal of devm_device_add_groups(), all the callers of this are
finally gone after the 6.10-rc1 merge (changes came in through
different trees), so it's safe to remove.
- much reported sysfs build error fixed up for systems that did not
have sysfs enabled
- driver core sync issue fix for a many reported issue over the years
that no one really paid much attention to, until Dirk finally
tracked down the real issue and made the "obviously correct and
simple" fix for it.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: synchronize really_probe() and dev_uevent()
sysfs: Unbreak the build around sysfs_bin_attr_simple_read()
driver core: remove devm_device_add_groups()
projects / users / jedix / linux-maple.git / log