Jason Gunthorpe [Fri, 12 Jul 2024 00:11:03 +0000 (21:11 -0300)]
iommufd: Put constants for all the uAPI enums
Relying on position in the enum makes it subtly harder when doing merge
resolutions or backporting as it is easy to grab a patch and not notice it
is a uAPI change with a differently ordered enum. This may become a bigger
problem in next cycles when iommu_hwpt_invalidate_data_type and other
per-driver enums have patches flowing through different trees.
So lets start including constants for all the uAPI enums to make this
safer.
Lu Baolu [Wed, 10 Jul 2024 08:33:40 +0000 (16:33 +0800)]
iommufd: Add check on user response code
The response code from user space is only allowed to be SUCCESS or
INVALID. All other values are treated by the device as a response code of
Response Failure according to PCI spec, section 10.4.2.1. This response
disables the Page Request Interface for the Function.
Add a check in iommufd_fault_fops_write() to avoid invalid response
code.
Lu Baolu [Wed, 10 Jul 2024 08:33:39 +0000 (16:33 +0800)]
iommufd: Remove IOMMUFD_PAGE_RESP_FAILURE
The response code of IOMMUFD_PAGE_RESP_FAILURE was defined to be
equivalent to the "Response Failure" in PCI spec, section 10.4.2.1.
This response code indicates that one or more pages within the
associated request group have encountered or caused an unrecoverable
error. Therefore, this response disables the PRI at the function.
Modern I/O virtualization technologies, like SR-IOV, share PRI among
the assignable device units. Therefore, a response failure on one unit
might cause I/O failure on other units.
Remove this response code so that user space can only respond with
SUCCESS or INVALID. The VMM is recommended to emulate a failure response
as a PRI reset, or PRI disable and changing to a non-PRI domain.
Fixes: c714f15860fc ("iommufd: Add fault and response message definitions") Link: https://lore.kernel.org/r/20240710083341.44617-2-baolu.lu@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Jason Gunthorpe [Tue, 9 Jul 2024 16:55:05 +0000 (13:55 -0300)]
Merge branch 'iommufd_pri' into iommufd for-next
Lu Baolu says:
====================
This series implements the functionality of delivering IO page faults to
user space through the IOMMUFD framework. One feasible use case is the
nested translation. Nested translation is a hardware feature that supports
two-stage translation tables for IOMMU. The second-stage translation table
is managed by the host VMM, while the first-stage translation table is
owned by user space. This allows user space to control the IOMMU mappings
for its devices.
When an IO page fault occurs on the first-stage translation table, the
IOMMU hardware can deliver the page fault to user space through the
IOMMUFD framework. User space can then handle the page fault and respond
to the device top-down through the IOMMUFD. This allows user space to
implement its own IO page fault handling policies.
User space application that is capable of handling IO page faults should
allocate a fault object, and bind the fault object to any domain that it
is willing to handle the fault generatd for them. On a successful return
of fault object allocation, the user can retrieve and respond to page
faults by reading or writing to the file descriptor (FD) returned.
The iommu selftest framework has been updated to test the IO page fault
delivery and response functionality.
====================
* iommufd_pri:
iommufd/selftest: Add coverage for IOPF test
iommufd/selftest: Add IOPF support for mock device
iommufd: Associate fault object with iommufd_hw_pgtable
iommufd: Fault-capable hwpt attach/detach/replace
iommufd: Add iommufd fault object
iommufd: Add fault and response message definitions
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
Lu Baolu [Tue, 2 Jul 2024 06:34:44 +0000 (14:34 +0800)]
iommufd/selftest: Add coverage for IOPF test
Extend the selftest tool to add coverage of testing IOPF handling. This
would include the following tests:
- Allocating and destroying an iommufd fault object.
- Allocating and destroying an IOPF-capable HWPT.
- Attaching/detaching/replacing an IOPF-capable HWPT on a device.
- Triggering an IOPF on the mock device.
- Retrieving and responding to the IOPF through the file interface.
Lu Baolu [Tue, 2 Jul 2024 06:34:43 +0000 (14:34 +0800)]
iommufd/selftest: Add IOPF support for mock device
Extend the selftest mock device to support generating and responding to
an IOPF. Also add an ioctl interface to userspace applications to trigger
the IOPF on the mock device. This would allow userspace applications to
test the IOMMUFD's handling of IOPFs without having to rely on any real
hardware.
Lu Baolu [Tue, 2 Jul 2024 06:34:42 +0000 (14:34 +0800)]
iommufd: Associate fault object with iommufd_hw_pgtable
When allocating a user iommufd_hw_pagetable, the user space is allowed to
associate a fault object with the hw_pagetable by specifying the fault
object ID in the page table allocation data and setting the
IOMMU_HWPT_FAULT_ID_VALID flag bit.
On a successful return of hwpt allocation, the user can retrieve and
respond to page faults by reading and writing the file interface of the
fault object.
Once a fault object has been associated with a hwpt, the hwpt is
iopf-capable, indicated by hwpt->fault is non NULL. Attaching,
detaching, or replacing an iopf-capable hwpt to an RID or PASID will
differ from those that are not iopf-capable.
Lu Baolu [Tue, 2 Jul 2024 06:34:41 +0000 (14:34 +0800)]
iommufd: Fault-capable hwpt attach/detach/replace
Add iopf-capable hw page table attach/detach/replace helpers. The pointer
to iommufd_device is stored in the domain attachment handle, so that it
can be echo'ed back in the iopf_group.
The iopf-capable hw page tables can only be attached to devices that
support the IOMMU_DEV_FEAT_IOPF feature. On the first attachment of an
iopf-capable hw_pagetable to the device, the IOPF feature is enabled on
the device. Similarly, after the last iopf-capable hwpt is detached from
the device, the IOPF feature is disabled on the device.
The current implementation allows a replacement between iopf-capable and
non-iopf-capable hw page tables. This matches the nested translation use
case, where a parent domain is attached by default and can then be
replaced with a nested user domain with iopf support.
Lu Baolu [Tue, 2 Jul 2024 06:34:40 +0000 (14:34 +0800)]
iommufd: Add iommufd fault object
An iommufd fault object provides an interface for delivering I/O page
faults to user space. These objects are created and destroyed by user
space, and they can be associated with or dissociated from hardware page
table objects during page table allocation or destruction.
User space interacts with the fault object through a file interface. This
interface offers a straightforward and efficient way for user space to
handle page faults. It allows user space to read fault messages
sequentially and respond to them by writing to the same file. The file
interface supports reading messages in poll mode, so it's recommended that
user space applications use io_uring to enhance read and write efficiency.
A fault object can be associated with any iopf-capable iommufd_hw_pgtable
during the pgtable's allocation. All I/O page faults triggered by devices
when accessing the I/O addresses of an iommufd_hw_pgtable are routed
through the fault object to user space. Similarly, user space's responses
to these page faults are routed back to the iommu device driver through
the same fault object.
Lu Baolu [Tue, 2 Jul 2024 06:34:39 +0000 (14:34 +0800)]
iommufd: Add fault and response message definitions
iommu_hwpt_pgfaults represent fault messages that the userspace can
retrieve. Multiple iommu_hwpt_pgfaults might be put in an iopf group,
with the IOMMU_PGFAULT_FLAGS_LAST_PAGE flag set only for the last
iommu_hwpt_pgfault.
An iommu_hwpt_page_response is a response message that the userspace
should send to the kernel after finishing handling a group of fault
messages. The @dev_id, @pasid, and @grpid fields in the message
identify an outstanding iopf group for a device. The @cookie field,
which matches the cookie field of the last fault in the group, will
be used by the kernel to look up the pending message.
Lu Baolu [Tue, 2 Jul 2024 06:34:38 +0000 (14:34 +0800)]
iommu: Extend domain attach group with handle support
Unlike the SVA case where each PASID of a device has an SVA domain
attached to it, the I/O page faults are handled by the fault handler
of the SVA domain. The I/O page faults for a user page table might
be handled by the domain attached to RID or the domain attached to
the PASID, depending on whether the PASID table is managed by user
space or kernel. As a result, there is a need for the domain attach
group interfaces to have attach handle support. The attach handle
will be forwarded to the fault handler of the user domain.
Add some variants of the domain attaching group interfaces so that they
could support the attach handle and export them for use in IOMMUFD.
Lu Baolu [Tue, 2 Jul 2024 06:34:37 +0000 (14:34 +0800)]
iommu: Add attach handle to struct iopf_group
Previously, the domain that a page fault targets is stored in an
iopf_group, which represents a minimal set of page faults. With the
introduction of attach handle, replace the domain with the handle
so that the fault handler can obtain more information as needed
when handling the faults.
iommu_report_device_fault() is currently used for SVA page faults,
which handles the page fault in an internal cycle. The domain is retrieved
with iommu_get_domain_for_dev_pasid() if the pasid in the fault message
is valid. This doesn't work in IOMMUFD case, where if the pasid table of
a device is wholly managed by user space, there is no domain attached to
the PASID of the device, and all page faults are forwarded through a
NESTING domain attaching to RID.
Add a static flag in iommu ops, which indicates if the IOMMU driver
supports user-managed PASID tables. In the iopf deliver path, if no
attach handle found for the iopf PASID, roll back to RID domain when
the IOMMU driver supports this capability.
iommu_get_domain_for_dev_pasid() is no longer used and can be removed.
Lu Baolu [Tue, 2 Jul 2024 06:34:36 +0000 (14:34 +0800)]
iommu: Remove sva handle list
The struct sva_iommu represents an association between an SVA domain and
a PASID of a device. It's stored in the iommu group's pasid array and also
tracked by a list in the per-mm data structure. Removes duplicate tracking
of sva_iommu by eliminating the list.
Lu Baolu [Tue, 2 Jul 2024 06:34:35 +0000 (14:34 +0800)]
iommu: Introduce domain attachment handle
Currently, when attaching a domain to a device or its PASID, domain is
stored within the iommu group. It could be retrieved for use during the
window between attachment and detachment.
With new features introduced, there's a need to store more information
than just a domain pointer. This information essentially represents the
association between a domain and a device. For example, the SVA code
already has a custom struct iommu_sva which represents a bond between
sva domain and a PASID of a device. Looking forward, the IOMMUFD needs
a place to store the iommufd_device pointer in the core, so that the
device object ID could be quickly retrieved in the critical fault handling
path.
Introduce domain attachment handle that explicitly represents the
attachment relationship between a domain and a device or its PASID.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20240702063444.105814-2-baolu.lu@linux.intel.com Signed-off-by: Will Deacon <will@kernel.org>
Joao Martins [Thu, 27 Jun 2024 11:01:05 +0000 (12:01 +0100)]
iommufd/iova_bitmap: Remove iterator logic
The newly introduced dynamic pinning/windowing greatly simplifies the code
and there's no obvious performance advantage that has been identified that
justifies maintinaing both schemes.
Remove the iterator logic and have iova_bitmap_for_each() just invoke the
callback with the total iova/length.
Fixes: 2780025e01e2 ("iommufd/iova_bitmap: Handle recording beyond the mapped pages") Link: https://lore.kernel.org/r/20240627110105.62325-12-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Matt Ochs <mochs@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Joao Martins [Thu, 27 Jun 2024 11:01:04 +0000 (12:01 +0100)]
iommufd/iova_bitmap: Dynamic pinning on iova_bitmap_set()
Today zerocopy iova bitmaps use a static iteration scheme where it walks
the bitmap data in a max iteration size of 2M of bitmap of data at a time.
That translates to a fixed window of IOVA space that can span up to 64G
(e.g. base pages, x86). Here 'window' refers to the IOVA space represented
by the bitmap data it is iterating. This static scheme is the ideal one
where the reported page-size is the same as the one behind the dirty
tracker.
However, problems start to appear when the dirty tracker may
dirty in many PTE sizes beyond or unaligned at the boundaries of the
iteration window. Such is the case for the IOMMU and
commit 2780025e01e2 ("iommufd/iova_bitmap: Handle recording beyond the mapped pages")
tried to fix the problem by handling the PTEs that get dirty which
surprass the end of the iteration. But the fix was incomplete and it
didn't handle all the data structure issues namely:
1) when there's nothing to dirty but the end of the iteration IOVA range is
a IOMMU hugepage PTE that crosses iterations, when it goes to the next
iteration it finds the other end of the said hugepage but don't account that
it had checked for that IOPTE already. iommu driver then walk the IOVA
space as if it is a new page without accounting that it is past the start
of a bigger page which ends up setting (future) dirty bits slightly
offset-ed. Note that the partial ranges here are self induced
due as a result of the fixed 'window' scheme being unaligned to this
hugepage IOPTE.
2) on the same line of thinking between pinning pages of different
iterations it could allow DMA to mark PTEs as dirty on the second part of
this previously mentioned partial hugepage. This leads to marking part of
the hugepage as dirty but still clearing IOPTE leading to missed dirty
data.
So to fix these problems more fundamentally and avoid future ones: instead
of iterating the whole bitmap in fixed chunks, instead only pin the bitmap
pages when it has dirty bits to set. The logic is simple in
iova_bitmap_set(): check where the current iova range to be marked as dirty
is pinned and pin the bitmap pages where to-be-recorded @iova starts if
it's not. If it's partially mapped out of the whole set, continue pinning
it and set bits until the whole dirty-size is covered. The latter is more
relevant with AMD iommu pgtable v1 format where you can have up
64G/128G/256G page sizes and thus you can set 64G at a time. Code also gets
simpler and easier to follow.
Fixing this without changing this iteration scheme means changing iommu
drivers to ignore any partial pages and not clear dirty bits, which is a
bit hacky. Though getting to walk only part of a IOMMU hugepage is a
self-induced due to this iteration scheme as it doesn't (and can't) align the
iteration boundary to the huge IOPTE at the end. Thus it can't know what
the hugepage size the iteration should align to until it walks the begin/end.
Dynamically pinning adds some comparisons inside iova_bitmap_set() to check
if something needs to be pinned if the IOVA range is out of range. Though
it has the benefit that non-dirty IOVA ranges only walk page tables without
needing to pin any bitmap pages. This dynamic scheme should be better for IOMMUs
where upper layers don't need or know what PTE sizes IOVAs map into (and there
could be more than one PTE size[*]) until they walk the IOMMU page tables.
A follow-up change will remove the iteration logic.
[*] Specially on AMD v1 iommu pgtable format where most powers of two are
supported as page-size.
There's no need to have two conditionals when they are closely tied
together. Move the setting of bitmap::set_ahead_length after it checks for
::pages array out of bounds access.
Joao Martins [Thu, 27 Jun 2024 11:01:01 +0000 (12:01 +0100)]
iommufd/iova_bitmap: Cache mapped length in iova_bitmap_map struct
The amount of IOVA mapped will be used more often in iova_bitmap_set() in
preparation to dynamically iterate the bitmap. Cache said length to avoid
having to calculate it all the time.
Joao Martins [Thu, 27 Jun 2024 11:01:00 +0000 (12:01 +0100)]
iommufd/iova_bitmap: Check iova_bitmap_done() after set ahead
After iova_bitmap_set_ahead() returns it may be at the end of the range.
Move iova_bitmap_set_ahead() earlier to avoid unnecessary attempt in
trying to pin the next pages by reusing iova_bitmap_done() check.
Fixes: 2780025e01e2 ("iommufd/iova_bitmap: Handle recording beyond the mapped pages") Link: https://lore.kernel.org/r/20240627110105.62325-7-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Matt Ochs <mochs@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Joao Martins [Thu, 27 Jun 2024 11:00:59 +0000 (12:00 +0100)]
iommufd/selftest: Do not record head iova to better match iommu drivers
Do not set a hugepage-aligned IOVA for incrementing an IOVA, to better
match current IOMMU driver implementations. Keep the logic of clearing all
IOPTE dirty bits for a whole hugepage, even if the range being dirtied
starts from part of the hugepage. This is also similar to AMD driver (iommu
v1 format) where IOMMU uses various subpage PTE data for dirty tracking
(for non-standard page sizes).
Joao Martins [Thu, 27 Jun 2024 11:00:58 +0000 (12:00 +0100)]
iommufd/selftest: Fix tests to use MOCK_PAGE_SIZE based buffer sizes
commit a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
added tests covering edge cases in the boundaries of iova bitmap. Although
it used buffer sizes thinking in PAGE_SIZE (4K) as opposed to the
MOCK_PAGE_SIZE (2K) that is used in iommufd mock selftests. This meant that
isn't correctly exercising everything specifically the u32 and 4K bitmap
test cases. Fix selftests buffer sizes to be based on mock page size.
Link: https://lore.kernel.org/r/20240627110105.62325-5-joao.m.martins@oracle.com Reported-by: Kevin Tian <kevin.tian@intel.com> Closes: https://lore.kernel.org/linux-iommu/96efb6cf-a41c-420f-9673-2f0b682cac8c@oracle.com/ Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP") Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Matt Ochs <mochs@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Joao Martins [Thu, 27 Jun 2024 11:00:55 +0000 (12:00 +0100)]
iommufd/selftest: Fix dirty bitmap tests with u8 bitmaps
With 64k base pages, the first 128k iova length test requires less than a
byte for a bitmap, exposing a bug in the tests that assume that bitmaps are
at least a byte.
Rather than dealing with bytes, have _test_mock_dirty_bitmaps() pass the
number of bits. The caller functions are adjusted to also use bits as well,
and converting to bytes when clearing, allocating and freeing the bitmap.
Link: https://lore.kernel.org/r/20240627110105.62325-2-joao.m.martins@oracle.com Reported-by: Matt Ochs <mochs@nvidia.com> Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP") Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Matt Ochs <mochs@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Linus Torvalds [Sun, 23 Jun 2024 15:06:01 +0000 (11:06 -0400)]
Merge tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The core gains placeholders for recently added functions when
CONFIG_I2C is not defined as well documentation fixes to start using
inclusive terminology.
The drivers get paths in DT bindings fixed as well as proper interrupt
handling for the ocores driver"
* tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs
docs: i2c: summary: document 'local' and 'remote' targets
docs: i2c: summary: document use of inclusive language
docs: i2c: summary: update speed mode description
docs: i2c: summary: update I2C specification link
docs: i2c: summary: start sentences consistently.
i2c: Add nop fwnode operations
i2c: ocores: set IACK bit after core is enabled
dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema
Linus Torvalds [Sun, 23 Jun 2024 15:01:57 +0000 (11:01 -0400)]
Merge tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Five smb3 client fixes
- three nets/fiolios cifs fixes
- fix typo in module parameters description
- fix incorrect swap warning"
* tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Move the 'pid' from the subreq to the req
cifs: Only pick a channel once per read request
cifs: Defer read completion
cifs: fix typo in module parameter enable_gcm_256
cifs: drop the incorrect assertion in cifs_swap_rw()
Linus Torvalds [Sun, 23 Jun 2024 14:32:24 +0000 (10:32 -0400)]
Merge tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix fragility in checks for unset node ID.
Use numa_valid_node() function to verify that nid is a valid node
ID instead of inconsistent comparisons with either NUMA_NO_NODE or
MAX_NUMNODES"
* tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: use numa_valid_node() helper to check for invalid node ID
Linus Torvalds [Sun, 23 Jun 2024 14:13:23 +0000 (07:13 -0700)]
Merge tag 'powerpc-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Prevent use-after-free in 64-bit KVM VFIO
- Add generated Power8 crypto asm to .gitignore
Thanks to Al Viro and Nathan Lynch.
* tag 'powerpc-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group()
powerpc/crypto: Add generated P8 asm to .gitignore
Wolfram Sang [Sun, 23 Jun 2024 00:13:27 +0000 (02:13 +0200)]
Merge tag 'i2c-host-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This pull request fixes the paths of the dt-schema to their
complete locations for the ChromeOS EC tunnel driver and the
Atmel at91sam drivers.
Additionally, the OpenCores driver receives a fix for an issue
that dates back to version 2.6.18. Specifically, the interrupts
need to be acknowledged (clearing all pending interrupts) after
enabling the core.
Linus Torvalds [Sat, 22 Jun 2024 21:02:16 +0000 (14:02 -0700)]
Merge tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver specific fixes for incorrect device descriptions, plus a
fix for a missing symbol export which causes build failures for some
newly added drivers in other trees"
* tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
regulator: bd71815: fix ramp values
regulator: core: Fix modpost error "regulator_get_regmap" undefined
regulator: tps6594-regulator: Fix the number of irqs for TPS65224 and TPS6594
Linus Torvalds [Sat, 22 Jun 2024 20:58:47 +0000 (13:58 -0700)]
Merge tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A number of fixes that have built up for SPI, a bunch of driver
specific ones including an unfortunate revert of an optimisation for
the i.MX driver which was causing issues with some configurations,
plus a couple of core fixes for the rarely used octal mode and for a
bad interaction between multi-CS support and target mode"
* tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
spi: Fix SPI slave probe failure
spi: Fix OCTAL mode support
spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()
spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz
spi: cs42l43: Correct SPI root clock speed
Linus Torvalds [Sat, 22 Jun 2024 20:55:56 +0000 (13:55 -0700)]
Merge tag 'nfsd-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix crashes triggered by administrative operations on the server
* tag 'nfsd-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: grab nfsd_mutex in nfsd_nl_rpc_status_get_dumpit()
nfsd: fix oops when reading pool_stats before server is started
Linus Torvalds [Sat, 22 Jun 2024 16:02:39 +0000 (09:02 -0700)]
Merge tag 'bcachefs-2024-06-22' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Lots of (mostly boring) fixes for syzbot bugs and rare(r) CI bugs.
The LRU_TIME_BITS fix was slightly more involved; we only have 48 bits
for the LRU position (we would prefer 64), so wraparound is possible
for the cached data LRUs on a filesystem that has done sufficient
(petabytes) reads; this is now handled.
One notable user reported bugfix, where we were forgetting to
correctly set the bucket data type, which should have been
BCH_DATA_need_gc_gens instead of BCH_DATA_free; this was causing us to
go emergency read-only on a filesystem that had seen heavy enough use
to see bucket gen wraparoud.
We're now starting to fix simple (safe) errors without requiring user
intervention - i.e. a small incremental step towards full self
healing.
This is currently limited to just certain allocation information
counters, and the error is still logged in the superblock; see that
patch for more information. ("bcachefs: Fix safe errors by default")"
* tag 'bcachefs-2024-06-22' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Move the ei_flags setting to after initialization
bcachefs: Fix a UAF after write_super()
bcachefs: Use bch2_print_string_as_lines for long err
bcachefs: Fix I_NEW warning in race path in bch2_inode_insert()
bcachefs: Replace bare EEXIST with private error codes
bcachefs: Fix missing alloc_data_type_set()
closures: Change BUG_ON() to WARN_ON()
bcachefs: fix alignment of VMA for memory mapped files on THP
bcachefs: Fix safe errors by default
bcachefs: Fix bch2_trans_put()
bcachefs: set_worker_desc() for delete_dead_snapshots
bcachefs: Fix bch2_sb_downgrade_update()
bcachefs: Handle cached data LRU wraparound
bcachefs: Guard against overflowing LRU_TIME_BITS
bcachefs: delete_dead_snapshots() doesn't need to go RW
bcachefs: Fix early init error path in journal code
bcachefs: Check for invalid btree IDs
bcachefs: Fix btree ID bitmasks
bcachefs: Fix shift overflow in read_one_super()
bcachefs: Fix a locking bug in the do_discard_fast() path
...
Linus Torvalds [Sat, 22 Jun 2024 15:16:17 +0000 (08:16 -0700)]
Merge tag 'ata-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- We currently enable DIPM (device initiated power management) in the
device (using a SET FEATURES call to the device), regardless if the
HBA supports any LPM states or not. It seems counter intuitive, and
potentially dangerous to enable a device side feature, when the HBA
does not have the corresponding support. Thus, make sure that we do
not enable DIPM if the HBA does not support any LPM states.
* tag 'ata-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Do not enable LPM if no LPM states are supported by the HBA
Linus Torvalds [Sat, 22 Jun 2024 15:03:47 +0000 (08:03 -0700)]
Merge tag 'pwm/for-6.10-rc5-fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Three fixes for the pwm-stm32 driver.
The first patch prevents an integer wrap-around for small periods. In
the second patch the calculation of the prescaler is fixed which
resulted in values for the ARR register that don't fit into the
corresponding register bit field. The last commit improves an error
message that was wrongly copied from another error path"
* tag 'pwm/for-6.10-rc5-fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix error message to not describe the previous error path
pwm: stm32: Fix calculation of prescaler
pwm: stm32: Refuse too small period requests
Linus Torvalds [Sat, 22 Jun 2024 14:58:21 +0000 (07:58 -0700)]
Merge tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci firmware
driver and SD card support on the milkv duo riscv board"
* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: psci: Fix return value from psci_system_suspend()
riscv: dts: sophgo: disable write-protection for milkv duo
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
Linus Torvalds [Sat, 22 Jun 2024 14:41:57 +0000 (07:41 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
Uwe Kleine-König [Fri, 21 Jun 2024 14:37:14 +0000 (16:37 +0200)]
pwm: stm32: Fix error message to not describe the previous error path
"Failed to lock the clock" is an appropriate error message for
clk_rate_exclusive_get() failing, but not for the clock running too
fast for the driver's calculations.
Uwe Kleine-König [Fri, 21 Jun 2024 14:37:13 +0000 (16:37 +0200)]
pwm: stm32: Fix calculation of prescaler
A small prescaler is beneficial, as this improves the resolution of the
duty_cycle configuration. However if the prescaler is too small, the
maximal possible period becomes considerably smaller than the requested
value.
One situation where this goes wrong is the following: With a parent
clock rate of 208877930 Hz and max_arr = 0xffff = 65535, a request for
period = 941243 ns currently results in PSC = 1. The value for ARR is
then calculated to
This value is bigger than 65535 however and so doesn't fit into the
respective register field. In this particular case the PWM was
configured for a period of 313733.4806027616 ns (with ARR = 98301 &
0xffff). Even if ARR was configured to its maximal value, only period =
627495.6861167669 ns would be achievable.
Fix the calculation accordingly and adapt the comment to match the new
algorithm.
With the calculation fixed the above case results in PSC = 2 and so an
actual period of 941229.1667195285 ns.
Linus Torvalds [Fri, 21 Jun 2024 21:28:28 +0000 (14:28 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes: one in the ufs driver fixing an obvious memory leak and the
other (with a core flag based update) trying to prevent USB crashes by
stopping the core from issuing a request for the I/O Hints mode page"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for USB/UAS devices
scsi: core: Introduce the BLIST_SKIP_IO_HINTS flag
scsi: ufs: core: Free memory allocated for model before reinit
Linus Torvalds [Fri, 21 Jun 2024 21:11:50 +0000 (14:11 -0700)]
Merge tag 'drm-fixes-2024-06-22' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Still pretty quiet, two weeks worth of amdgpu fixes, with one i915 and
one xe. I didn't get the drm-misc-fixes tree PR this week, but there
was only one fix queued and I think it can wait another week, so seems
pretty normal.
xe:
- Fix for invalid register access
i915:
- Fix conditions for joiner usage, it's not possible with eDP MSO
* tag 'drm-fixes-2024-06-22' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/vf: Don't touch GuC irq registers if using memory irqs
drm/amdgpu: init TA fw for psp v14
drm/amdgpu: cleanup MES11 command submission
drm/amdgpu: fix UBSAN warning in kv_dpm.c
drm/radeon: fix UBSAN warning in kv_dpm.c
drm/amd/display: Disable CONFIG_DRM_AMD_DC_FP for RISC-V with clang
drm/amd/display: Attempt to avoid empty TUs when endpoint is DPIA
drm/amd/display: change dram_clock_latency to 34us for dcn35
drm/amd/display: Change dram_clock_latency to 34us for dcn351
drm/amdgpu: revert "take runtime pm reference when we attach a buffer" v2
drm/amdgpu: Indicate CU havest info to CP
drm/amd/display: prevent register access while in IPS
drm/amdgpu: fix locking scope when flushing tlb
drm/amd/display: Remove redundant idle optimization check
drm/i915/mso: using joiner is not possible with eDP MSO
Linus Torvalds [Fri, 21 Jun 2024 21:06:14 +0000 (14:06 -0700)]
Merge tag 'ovl-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs, one originating in this cycle and one from 6.6"
* tag 'ovl-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: fix encoding fid for lower only root
ovl: fix copy-up in tmpfile
Linus Torvalds [Fri, 21 Jun 2024 20:55:38 +0000 (13:55 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Small bug fixes:
- Prevent a crash in bnxt if the en and rdma drivers disagree on the
MSI vectors
- Have rxe memcpy inline data from the correct address
- Fix rxe's validation of UD packets
- Several mlx5 mr cache issues: bad lock balancing on error, missing
propagation of the ATS property to the HW, wrong bucketing of freed
mrs in some cases
- Incorrect goto error unwind in mlx5 driver probe
- Missed userspace input validation in mlx5 SRQ create
- Incorrect uABI in MANA rejecting valid optional MR creation flags"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mana_ib: Ignore optional access flags for MRs
RDMA/mlx5: Add check for srq max_sge attribute
RDMA/mlx5: Fix unwind flow as part of mlx5_ib_stage_init_init
RDMA/mlx5: Ensure created mkeys always have a populated rb_key
RDMA/mlx5: Follow rb_key.ats when creating new mkeys
RDMA/mlx5: Remove extra unlock on error path
RDMA/rxe: Fix responder length checking for UD request packets
RDMA/rxe: Fix data copy for IB_SEND_INLINE
RDMA/bnxt_re: Fix the max msix vectors macro
Linus Torvalds [Fri, 21 Jun 2024 18:26:43 +0000 (11:26 -0700)]
Merge tag 'sound-6.10-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound fixes from Takashi Iwai:
"A follow-up fix for a random build issue, as well as another trivial
HD-audio quirk"
* tag 'sound-6.10-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Use imply for suggesting CONFIG_SERIAL_MULTI_INSTANTIATE
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14AHP9
Linus Torvalds [Fri, 21 Jun 2024 18:20:37 +0000 (11:20 -0700)]
Merge tag 'acpi-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These address a possible NULL pointer dereference in the ACPICA code
and quirk camera enumeration on multiple platforms where incorrect
data are present in the platform firmware.
Specifics:
- Undo an ACPICA code change that attempted to keep operation regions
within a page boundary, but allowed accesses to unmapped memory to
occur (Raju Rangoju)
- Ignore MIPI camera graph port nodes created with the help of the
information from the ACPI tables on all Dell Tiger, Alder and
Raptor Lake models as that information is reported to be invalid on
the platforms in question (Hans de Goede)
- Use new Intel CPU model matching macros in the MIPI DisCo for
Imaging part of ACPI device enumeration (Hans de Goede)"
* tag 'acpi-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: mipi-disco-img: Switch to new Intel CPU model defines
ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and Raptor Lake models
ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine."
Linus Torvalds [Fri, 21 Jun 2024 18:16:56 +0000 (11:16 -0700)]
Merge tag 'thermal-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the Mediatek lvts_thermal driver, the Intel int340x driver,
and the thermal core (two issues related to system suspend).
Specifics:
- Remove the filtered mode for mt8188 from lvts_thermal as it is not
supported on this platform and fail the lvts_thermal initialization
when the golden temperature is zero as that means the efuse data is
not correctly set (Julien Panis)
- Update the processor_thermal part of the Intel int340x driver to
support shared interrupts as the processor thermal device interrupt
may in fact be shared with PCI devices (Srinivas Pandruvada)
- Synchronize the suspend-prepare and post-suspend actions of the
thermal PM notifier to avoid a destructive race condition and
change the priority of that notifier to the minimum to avoid
interference between the work items spawned by it and the other
PM notifiers during system resume (Rafael Wysocki)"
* tag 'thermal-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: processor_thermal: Support shared interrupts
thermal: core: Change PM notifier priority to the minimum
thermal: core: Synchronize suspend-prepare and post-suspend actions
thermal/drivers/mediatek/lvts_thermal: Return error in case of invalid efuse data
thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
Kent Overstreet [Thu, 20 Jun 2024 17:20:49 +0000 (13:20 -0400)]
bcachefs: Fix I_NEW warning in race path in bch2_inode_insert()
discard_new_inode() is the correct interface for tearing down an indoe
that was fully created but not made visible to other threads, but it
expects I_NEW to be set, which we don't use.
Reported-by: https://github.com/koverstreet/bcachefs/issues/690 Fixes: bcachefs: Fix race path in bch2_inode_insert() Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Thu, 20 Jun 2024 14:04:35 +0000 (10:04 -0400)]
bcachefs: Fix missing alloc_data_type_set()
Incorrect bucket state transition in the discard path; when incrementing
a bucket's generation number that had already been discarded, we were
forgetting to check if it should be need_gc_gens, not free.
This was caught by the .invalid checks in the transaction commit path,
causing us to go emergency read only.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Patrisious Haddad [Tue, 28 May 2024 12:52:56 +0000 (15:52 +0300)]
RDMA/mlx5: Add check for srq max_sge attribute
max_sge attribute is passed by the user, and is inserted and used
unchecked, so verify that the value doesn't exceed maximum allowed value
before using it.
Jason Gunthorpe [Tue, 28 May 2024 12:52:53 +0000 (15:52 +0300)]
RDMA/mlx5: Follow rb_key.ats when creating new mkeys
When a cache ent already exists but doesn't have any mkeys in it the cache
will automatically create a new one based on the specification in the
ent->rb_key.
ent->ats was missed when creating the new key and so ma_translation_mode
was not being set even though the ent requires it.
Jason Gunthorpe [Tue, 28 May 2024 12:52:52 +0000 (15:52 +0300)]
RDMA/mlx5: Remove extra unlock on error path
The below commit lifted the locking out of this function but left this
error path unlock behind resulting in unbalanced locking. Remove the
missed unlock too.
Michael Roth [Tue, 4 Jun 2024 23:35:10 +0000 (18:35 -0500)]
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
With commit 27bd5fdc24c0 ("KVM: SEV-ES: Prevent MSR access post VMSA
encryption"), older VMMs like QEMU 9.0 and older will fail when booting
SEV-ES guests with something like the following error:
qemu-system-x86_64: error: failed to get MSR 0x174
qemu-system-x86_64: ../qemu.git/target/i386/kvm/kvm.c:3950: kvm_get_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
This is because older VMMs that might still call
svm_get_msr()/svm_set_msr() for SEV-ES guests after guest boot even if
those interfaces were essentially just noops because of the vCPU state
being encrypted and stored separately in the VMSA. Now those VMMs will
get an -EINVAL and generally crash.
Newer VMMs that are aware of KVM_SEV_INIT2 however are already aware of
the stricter limitations of what vCPU state can be sync'd during
guest run-time, so newer QEMU for instance will work both for legacy
KVM_SEV_ES_INIT interface as well as KVM_SEV_INIT2.
So when using KVM_SEV_INIT2 it's okay to assume userspace can deal with
-EINVAL, whereas for legacy KVM_SEV_ES_INIT the kernel might be dealing
with either an older VMM and so it needs to assume that returning
-EINVAL might break the VMM.
Address this by only returning -EINVAL if the guest was started with
KVM_SEV_INIT2. Otherwise, just silently return.
Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nikunj A Dadhania <nikunj@amd.com> Reported-by: Srikanth Aithal <sraithal@amd.com> Closes: https://lore.kernel.org/lkml/37usuu4yu4ok7be2hqexhmcyopluuiqj3k266z4gajc2rcj4yo@eujb23qc3zcm/ Fixes: 27bd5fdc24c0 ("KVM: SEV-ES: Prevent MSR access post VMSA encryption") Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240604233510.764949-1-michael.roth@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rafael J. Wysocki [Fri, 21 Jun 2024 10:55:12 +0000 (12:55 +0200)]
Merge branch 'acpi-scan'
Merge ACPI device enumeration fixes for 6.10-rc5:
- Ignore MIPI camera graph port nodes created with the help of the
information from the ACPI tables on all Dell Tiger, Alder and Raptor
Lake models as that information is reported to be invalid on the
systems in question (Hans de Goede).
- Use new Intel CPU model matching macros in the MIPI DisCo for Imaging
part of ACPI device enumeration (Hans de Goede).
* acpi-scan:
ACPI: mipi-disco-img: Switch to new Intel CPU model defines
ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and Raptor Lake models
Takashi Iwai [Fri, 21 Jun 2024 07:39:09 +0000 (09:39 +0200)]
ALSA: hda: Use imply for suggesting CONFIG_SERIAL_MULTI_INSTANTIATE
The recent fix introduced a reverse selection of
CONFIG_SERIAL_MULTI_INSTANTIATE, but its condition isn't always met.
Use a weak reverse selection to suggest the config for avoiding such
inconsistencies, instead.
Arnd Bergmann [Thu, 20 Jun 2024 16:23:04 +0000 (18:23 +0200)]
mips: fix compat_sys_lseek syscall
This is almost compatible, but passing a negative offset should result
in a EINVAL error, but on mips o32 compat mode would seek to a large
32-bit byte offset.
Use compat_sys_lseek() to correctly sign-extend the argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In the current code, if multiple hardware breakpoints/watchpoints in
a user-space thread, some of them will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
printf("start test\n");
a = 1;
printf("a = %d\n", a);
printf("end test\n");
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
...
The first hardware watchpoint is not triggered, the root causes are:
1. In hw_breakpoint_control(), The FWPnCFG1.2.4/MWPnCFG1.2.4 register
settings are not distinguished. They should be set based on hardware
watchpoint functions (fetch or load/store operations).
2. In breakpoint_handler() and watchpoint_handler(), it doesn't identify
which watchpoint is triggered. So, all watchpoint-related perf_event
callbacks are called and siginfo is sent to the user space. This will
cause user-space unable to determine which watchpoint is triggered.
The kernel need to identity which watchpoint is triggered via MWPS/
FWPS registers, and then call the corresponding perf event callbacks
to report siginfo to the user-space.
Modify the relevant code to solve above issues.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
Hardware watchpoint 2: a
Old value = 0
New value = 1
main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
(gdb) c
Continuing.
end test
[Inferior 1 (process 778) exited normally]
Cc: stable@vger.kernel.org Signed-off-by: Hui Li <lihui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the current code, gdb can set the watchpoint successfully through
ptrace interface, but watchpoint will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
printf("a = %d\n", a);
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
...
(gdb) r
...
a = 1
[Inferior 1 (process 4650) exited normally]
No watchpoints were triggered, the root causes are:
1. Kernel uses perf_event and hw_breakpoint framework to control
watchpoint, but the perf_event corresponding to watchpoint is
not enabled. So it needs to be enabled according to MWPnCFG3
or FWPnCFG3 PLV bit field in ptrace_hbp_set_ctrl(), and privilege
is set according to the monitored addr in hw_breakpoint_control().
Furthermore, add a judgment in ptrace_hbp_set_addr() to ensure
kernel-space addr cannot be monitored in user mode.
2. The global enable control for all watchpoints is the WE bit of
CSR.CRMD, and hardware sets the value to 0 when an exception is
triggered. When the ERTN instruction is executed to return, the
hardware restores the value of the PWE field of CSR.PRMD here.
So, before a thread containing watchpoints be scheduled, the PWE
field of CSR.PRMD needs to be set to 1. Add this modification in
hw_breakpoint_control().
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#basic-control-and-status-registers
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Hardware watchpoint 1: a
Old value = 0
New value = 1
main () at test.c:6
6 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
[Inferior 1 (process 775) exited normally]
Cc: stable@vger.kernel.org Signed-off-by: Hui Li <lihui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Hui Li [Fri, 21 Jun 2024 02:18:40 +0000 (10:18 +0800)]
LoongArch: Fix watchpoint setting error
In the current code, when debugging the following code using gdb,
"invalid argument ..." message will be displayed.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Invalid argument setting hardware debug registers
There are mainly two types of issues.
1. Some incorrect judgment condition existed in user_watch_state
argument parsing, causing -EINVAL to be returned.
When setting up a watchpoint, gdb uses the ptrace interface,
ptrace(PTRACE_SETREGSET, tid, NT_LOONGARCH_HW_WATCH, (void *) &iov)).
Register values in user_watch_state as follows:
In arch_bp_generic_fields(), return -EINVAL when ctrl.len is
LOONGARCH_BREAKPOINT_LEN_8(0b00). So delete the incorrect judgment here.
In ptrace_hbp_fill_attr_ctrl(), when note_type is NT_LOONGARCH_HW_WATCH
and ctrl[0] == 0x0, if ((type & HW_BREAKPOINT_RW) != type) will return
-EINVAL. Here ctrl.type should be set based on note_type, and unnecessary
judgments can be removed.
2. The watchpoint argument was not set correctly due to unnecessary
offset and alignment_mask.
Modify ptrace_hbp_fill_attr_ctrl() and hw_breakpoint_arch_parse(), which
ensure the watchpont argument is set correctly.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
Cc: stable@vger.kernel.org Signed-off-by: Hui Li <lihui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Xi Ruoyao [Fri, 21 Jun 2024 02:18:40 +0000 (10:18 +0800)]
LoongArch: Only allow OBJTOOL & ORC unwinder if toolchain supports -mthin-add-sub
GAS <= 2.41 does not support generating R_LARCH_{32,64}_PCREL for
"label - ." and it generates R_LARCH_{ADD,SUB}{32,64} pairs instead.
Objtool cannot handle R_LARCH_{ADD,SUB}{32,64} pair in __jump_table
(static key implementation) and etc. so it will produce some warnings.
This is causing the kernel CI systems to complain everywhere.
For GAS we can check if -mthin-add-sub option is available to know if
R_LARCH_{32,64}_PCREL are supported.
For Clang, we require Clang >= 18 and Clang >= 17 already supports
R_LARCH_{32,64}_PCREL. But unfortunately Clang has some other issues,
so we disable objtool for Clang at present.
Note that __jump_table here is not generated by the compiler, so
-fno-jump-table is completely irrelevant for this issue.
projects / users / jedix / linux-maple.git / log