staging: brcm80211: use static qualifier for local symbols in brcmsmac
Cleanup resulted in merging several files and made several symbols
local to a source file. These were found by running sparse as it
gave the warning: symbol 'foo' was not declared. Should it be static?
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: reduce sparse messages on brcmsmac sources
Running sparse over the driver sources showed 1356 sparse messages
and quite a number are due to missing __iomem attribute in some
places. This patch reduces the number significantly.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: use static qualifier for local symbols in brcmfmac
Cleanup resulted in merging several files and made several symbols
local to a source file. These were found by running sparse as it
gave the warning: symbol 'foo' was not declared. Should it be static?
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: remove static function prototypes from main.c
Function prototypes for static functions are not strictly needed and
considered unwanted by linux community. This patch reorders the
functions in brcmsmac/main.c and gets rid of the prototypes.
Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Thu, 1 Sep 2011 17:23:14 +0000 (12:23 -0500)]
staging: rtl8192e: Fix smatch error and warning in rtl_core.c
Smatch shows the following errors:
CHECK drivers/staging/rtl8192e/rtl_core.c
drivers/staging/rtl8192e/rtl_core.c +600 rtl8192_qos_activate(7) warn: variable dereferenced before check 'priv'
drivers/staging/rtl8192e/rtl_core.c +1345 rtl8192_init(40) warn: 'dev->irq' was not released on error
drivers/staging/rtl8192e/rtl_core.c +2120 rtl8192_alloc_rx_desc_ring(43) error: potential null derefence 'entry'.
drivers/staging/rtl8192e/rtl_core.c +3010 rtl8192_pci_probe(153) warn: 'pmem_start' was not released on error
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Thu, 1 Sep 2011 17:23:13 +0000 (12:23 -0500)]
staging: rtl8192e: Remove dead code involving MOVE_INTO_HANDLER
File rtl_core.c contains the statement "#define MOVE_INTO_HANDLER". As a
result, everything inside an "ifndef MOVE_INTO_HANDLER" is dead code and
can be removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Sterling [Tue, 6 Sep 2011 23:10:55 +0000 (16:10 -0700)]
Staging: hv: Add support for >2 TB LUN in storage driver.
If a LUN larger than 2 TB is attached to a Linux VM on Hyper-V, we currently
report a maximum size of 2 TB. This patch resolves the issue in hv_storvsc.
Thanks to Robert Scheck <robert.scheck@etes.de> for reporting the issue.
Michael Hennerich [Fri, 2 Sep 2011 16:25:47 +0000 (17:25 +0100)]
staging:iio: ad7152: fix channel assignment for AD7153
In case the AD7153 is selected we need to make sure we provide channel info
for the first capacitance input in both single ended and differential
configuration.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 2 Sep 2011 16:25:33 +0000 (17:25 +0100)]
staging:iio:imu:adis16400 cleanups
a) remove irq is gpio requirement - No reason this needs to be true.
b) use actual part name in info message rather than adis16400 in all cases.
c) scrap use of IIO_CHAN to simplify move out of staging.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 2 Sep 2011 16:25:32 +0000 (17:25 +0100)]
staging:iio:adc:ad7291 bring into line with current abi + chan_spec conversion.
Also add some locking.
Some major changes to how this driver works.
For voltage channels it is currently either in single read mode or in
a monitor mode (events only). Could be much cleverer and allow
reading of any channels that happend to be monitored, but haven't
done that yet.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Fri, 2 Sep 2011 16:25:28 +0000 (17:25 +0100)]
staging:iio:adc:ad7152: update scale handling
Add scale_available attribute.
fix ad7152_scale_table, values are not sorted descending.
Use IIO_VAL_INT_PLUS_NANO, to increase granularity.
Update scale handling accordingly.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Fri, 2 Sep 2011 16:25:27 +0000 (17:25 +0100)]
staging:iio:adc:ad7152: Miscellaneous fixes and touch-up
Remove unused define.
Introduce cached SETUP variables.
Wait until calibration finished. (Device returns to idle state)
IIO_CHAN_INFO_CALIBSCALE_SEPARATE use proper scales. (range 1.0 to 1.99999)
i2c_smbus word transactions expect low byte first, therefore swap bytes.
CAPDIFF is bit in SETUP not CFG.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Fri, 2 Sep 2011 16:25:22 +0000 (17:25 +0100)]
staging:iio:adc:ad7150: Add support for the second interrupt strobe.
The AD7150 features two outputs that can be used as interrupt strobes
to the host processor. In order to receive all events independently,
both need to utilized.
Update copyright notice.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Fri, 2 Sep 2011 16:25:21 +0000 (17:25 +0100)]
staging:iio:adc:ad7150: remove conversion mode handling.
The AD7150 family of devices power up in continues conversion mode.
We can stay in this mode, unless power consumption becomes a real issue.
Actually the event generation as well as the running average
relies on continues conversion mode, so we better stay there.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Minimal changes to code layout as going to do chan spec conversion shortly.
Otherwise, there are numerous code sharing opportunities in here and abi
elements that are uterly non compliant.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 2 Sep 2011 16:14:45 +0000 (17:14 +0100)]
staging:iio: Differential channel handling - use explicit flag rather than types.
Straight forward change in the core, but required some drivers to not use
the IIO_CHAN macro as that doesn't allow setting this bit (and is
going away anyway). Hence the churn.
Tested on max1363 with a couple of supported parts.
V2: differential bit in code got 7 bits and direction 1. Reversed that.
Issue spotted by Michael - thanks!
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 2 Sep 2011 16:14:42 +0000 (17:14 +0100)]
staging:iio:naming in the EV_BIT macro fix.
Should always have been IIO_EV_DIR_MAX as that's what it actually controls.
Also reduced the number to 4 as not yet seen a case needing more and this
is not userspace visible anyway.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 2 Sep 2011 16:14:38 +0000 (17:14 +0100)]
staging:iio: Switch the channel masks to bitmaps so as to allow for more channels.
This is as light as possible on changes to current drivers.
Some drivers make assumptions that their masks fit in a single
long. Given they were previously working this is clearly valid if
not tidy.
The max1363 is an example where there should be no such assumptions.
V2: Add the new ad5933
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 2 Sep 2011 16:14:37 +0000 (17:14 +0100)]
staging:iio:various move default scan mask setting after ring register or remove
The scan mask will be dynamically assigned in register, so don't
use it before that.
In adis16260 I've moved it as I know this driver has userspace code.
Same for sca3000 where it is cost free due to hardware buffer.
Can do that for the others, but in theory userspace code should always
have been checking these and setting them appropriately anyway!
V2: Clear default mask out of adis16400 as reported by Michael
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Reported-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Tue, 30 Aug 2011 11:32:45 +0000 (12:32 +0100)]
staging: iio: remove specific chrdev for event reading. Get fd from ioctl on buffer.
Change suggested by Arnd Bergmann.
No real reason to have two chrdevs per device. This step merges them into one.
Currently this means that events will only work on devices with buffers. THat will
be remedied shortly.
V2: set name for event attribute groups. Otherwise they all sorts of fun occurs on
dynamic channel event attribute creation.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: hv: fix the page buffer when rndis data go across page boundary
In rndis_filter_receive_data(), we need to drop the 0th page and move the
rest of pages forward if the rndis data go across page boundary, otherwise
the page offset will overflow.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / users / jedix / linux-maple.git / log