Matthew Brost [Fri, 14 Jun 2024 06:13:43 +0000 (23:13 -0700)]
drm/xe: Invert runnable_state / pending enable check and assert
Rather than checking for pending enable and asserting runnable_state ==
1 in sched done handler, invert these. This is more robust code taking
action based on the G2H message and asserting KMD tracking state is
correct.
Michal Wajdeczko [Wed, 19 Jun 2024 21:45:55 +0000 (23:45 +0200)]
drm/xe/vf: Don't use register based TLB invalidation if VF
VF drivers can only use GuC-based TLB invalidation, as they don't
have access to the related registers. However, VFs shouldn't need
any explicit TLB invalidation before enabling CTB communication,
as there will be an implicit GGTT TLB invalidation issued by the
GuC itself as part of MMIO-based action handling.
Michal Wajdeczko [Wed, 19 Jun 2024 21:45:51 +0000 (23:45 +0200)]
drm/xe/vf: Don't apply tile workarounds if VF
The VF drivers can't apply any workarounds as they don't have
access to related registers. Since xe_wa_apply_tile_workarounds()
function is not using RTP yet, we have to add early return.
Michal Wajdeczko [Wed, 19 Jun 2024 21:45:50 +0000 (23:45 +0200)]
drm/xe/vf: Don't run any save-restore RTP actions if VF
There are no RTP save-restore actions applicable for VFs on
current platforms. If any future platform will require some,
we will need to update the RTP framework to support VF_READY
or VF_ONLY actions. In the meantime, just skip all actions if
we are running as VF driver.
Michal Wajdeczko [Thu, 20 Jun 2024 10:01:47 +0000 (12:01 +0200)]
drm/xe/vf: Disable features that do not apply to VFs
We already maintain several flags that control the availability
of features on a given device. Disable features, like PCODE or
GuC PC or GSC, that do not apply to a VF device.
Ashutosh Dixit [Wed, 19 Jun 2024 22:56:17 +0000 (15:56 -0700)]
drm/xe/oa: Remove WARN_ON's for unsupported configurations
The OA ioctl's already have drm_dbg's which are sufficient to tell the user
that OA is not supported on unsupported configurations (execlist mode and
platform gen < 12). Having additional WARN_ON's for these during driver
probe create unnecessary noise. Just remove these WARN_ON's.
José Roberto de Souza [Wed, 19 Jun 2024 19:28:54 +0000 (12:28 -0700)]
drm/xe/oa: Call xe_oa_emit_oa_config() with new config when updating config
When UMD ask config to be updated, xe_oa_config_locked() was calling
xe_oa_emit_oa_config() that would use stream->oa_config but that is
only changed to the next oa_config after xe_oa_emit_oa_config() finish.
So it was setting the same config for all DRM_XE_PERF_IOCTL_CONFIG
calls.
Michal Wajdeczko [Wed, 19 Jun 2024 16:34:13 +0000 (18:34 +0200)]
drm/xe/guc: Move ARAT interrupts enabling to the upload step
Even though ARAT interrupts are enabled by default, we still want
to keep the code that enables them. But instead doing that in the
CTB enabling step, move this code to the upload step, where we
already setup few other registers related to GuC.
Michal Wajdeczko [Tue, 18 Jun 2024 10:49:47 +0000 (12:49 +0200)]
drm/xe: Use ttm_uncached for BO with NEEDS_UC flag
We should honor requested uncached mode also at the TTM layer.
Otherwise, we risk losing updates to the memory based interrupts
source or status vectors, as those require uncached memory.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240618104947.729-1-michal.wajdeczko@intel.com
Ashutosh Dixit [Tue, 18 Jun 2024 01:46:09 +0000 (18:46 -0700)]
drm/xe/oa: Enable Xe2+ overrun mode
Enable Xe2+ overrun mode. For Xe2+, when overrun mode is enabled, there are
no partial reports at the end of buffer, making the OA buffer effectively a
non-power-of-2 size circular buffer whose size, circ_size, is a multiple of
the report size.
v2: Fix implementation of xe_oa_circ_diff/xe_oa_circ_incr (Umesh)
Ashutosh Dixit [Tue, 18 Jun 2024 01:46:08 +0000 (18:46 -0700)]
drm/xe/oa: Changes to OA_TAKEN
Rename OA_TAKEN to xe_oa_circ_diff, since xe_oa_circ_diff better describes
what the macro actually does. Also convert to function and add xe_oa_stream
arg. These will be used in the following patch.
Ashutosh Dixit [Tue, 18 Jun 2024 01:46:06 +0000 (18:46 -0700)]
drm/xe/oa: Add MMIO trigger support
Add MMIO trigger support and allow-list required registers for MMIO trigger
use case. Registers are whitelisted for the lifetime of the driver but MMIO
trigger is enabled only for the duration of the stream.
Ashutosh Dixit [Tue, 18 Jun 2024 01:46:05 +0000 (18:46 -0700)]
drm/xe/oa/uapi: OA buffer mmap
Allow the OA buffer to be mmap'd to userspace. This is needed for the MMIO
trigger use case. Even otherwise, with whitelisted OA head/tail ptr
registers, userspace can receive/interpret OA data from the mmap'd buffer
without issuing read()'s on the OA stream fd.
v2: Remove unmap_mapping_range from xe_oa_release (Thomas H)
Use vm_flags_mod (Umesh)
Ashutosh Dixit [Tue, 18 Jun 2024 01:46:04 +0000 (18:46 -0700)]
drm/xe/oa/uapi: Query OA unit properties
Implement query for properties of OA units present on a device.
v2: Clean up reserved/pad fields (Umesh)
Follow the same scheme as other query structs
v3: Skip reporting reserved engines attached to OA units
v4: Expose oa_buf_size via DRM_XE_PERF_IOCTL_INFO (Umesh)
v5: Don't expose capabilities as OR of properties (Umesh)
v6: Add extensions to query output structs: drm_xe_oa_unit,
drm_xe_query_oa_units and drm_xe_oa_stream_info
v7: Change oa_units[] array to __u64 type
Ashutosh Dixit [Tue, 18 Jun 2024 01:46:02 +0000 (18:46 -0700)]
drm/xe/oa: Add OAR support
Add OAR support to allow userspace to execute MI_REPORT_PERF_COUNT on
render engines. Configuration batches are used to program the OAR unit, as
well as modifying the render engine context image of a specified exec queue
(to have correct register values when that context switches in).
v2: Rename/refactor xe_oa_modify_self (Umesh)
v3: Move IS_MI_LRI_CMD() into xe_oa.c (Michal)
Ashutosh Dixit [Tue, 18 Jun 2024 01:46:01 +0000 (18:46 -0700)]
drm/xe/oa/uapi: Read file_operation
Implement the OA stream read file_operation. Both blocking and non-blocking
reads are supported. As part of read system call, the read copies OA perf
data from the OA buffer to the user buffer, after appending packet headers
for status and data packets.
v2: Drop OA report headers, implement DRM_XE_PERF_IOCTL_STATUS (Umesh)
v3: Introduce 'struct drm_xe_oa_stream_status'
v4: Define oa_status register bitfields (Umesh)
v5: Add extensions to 'struct drm_xe_oa_stream_status'
v6: Minor cleanup, eliminate report32 variable
v7: Use -EIO to signal to userspace to read OASTATUS using
DRM_XE_PERF_IOCTL_STATUS, change previous sites returning -EIO to
return -EINVAL
Make drm_xe_oa_stream_status bits contiguous (Jose, Umesh)
rmw oa_status bits (Umesh)
Ashutosh Dixit [Tue, 18 Jun 2024 01:46:00 +0000 (18:46 -0700)]
drm/xe/oa/uapi: Expose OA stream fd
The OA stream open perf op returns an fd with its own file_operations for
the newly initialized OA stream. These file_operations allow userspace to
enable or disable the stream, as well as apply a different metric
configuration for the OA stream. Userspace can also poll for data
availability. OA stream initialization is completed in this commit by
enabling the OA stream. When sampling is enabled this starts a hrtimer
which periodically checks for data availablility.
v2: Use stream properties for stream reconfiguration with
DRM_XE_PERF_IOCTL_CONFIG
v3: Hold runtime_pm reference across oa buffer alloc/free
v4: Fix 32 bit build
Ashutosh Dixit [Tue, 18 Jun 2024 01:45:59 +0000 (18:45 -0700)]
drm/xe/oa: OA stream initialization (OAG)
Implement majority of OA stream initialization (as part of OA stream open)
ioctl). OAG buffer is allocated for receiving perf counter samples from
HW. OAG unit is initialized and the selected OA metric configuration is
programmed into OAG unit HW using a command/batch buffer.
Ashutosh Dixit [Tue, 18 Jun 2024 01:45:58 +0000 (18:45 -0700)]
drm/xe/oa/uapi: Define and parse OA stream properties
Properties for OA streams are specified by user space, when the stream is
opened, as a chain of drm_xe_ext_set_property struct's. Parse and validate
these stream properties.
v2: Remove struct drm_xe_oa_open_param (Harish Chegondi)
Drop DRM_XE_OA_PROPERTY_POLL_OA_PERIOD_US (Umesh)
Eliminate comparison with xe_oa_max_sample_rate (Umesh)
Drop 'struct drm_xe_oa_record_header' (Umesh)
v3: s/DRM_XE_OA_PROPERTY_OA_EXPONENT/ \
DRM_XE_OA_PROPERTY_OA_PERIOD_EXPONENT/ (Jose)
v4: Fix 32 bit build
v5: Add non-static function kernel doc (Michal)
Ashutosh Dixit [Tue, 18 Jun 2024 01:45:57 +0000 (18:45 -0700)]
drm/xe/oa/uapi: Add/remove OA config perf ops
Introduce add/remove config perf ops for OA. OA configurations consist of a
set of event/counter select register address/value pairs. The add_config
perf op validates and stores such configurations and also exposes them in
the metrics sysfs. These configurations will be programmed to OA unit HW
when an OA stream using a configuration is opened. The OA stream can also
switch to other stored configurations.
v2: Start config id's from 1 and other minor review comments (Umesh)
v3: Add 32 bit build
v4: Add kernel doc for non-static functions (Michal)
Ashutosh Dixit [Tue, 18 Jun 2024 01:45:56 +0000 (18:45 -0700)]
drm/xe/oa/uapi: Initialize OA units
Initialize OA unit data struct's for each gt during device probe. Also
assign OA units for hardware engines.
v2: Remove XE_OA_UNIT_OAG/XE_OA_UNIT_OAM_SAMEDIA_0 enum (Umesh)
Change mtl_oa_base to 0x13000 (Umesh)
v3: Switch to drmm_ functions and other cleanups (Michal)
Ashutosh Dixit [Tue, 18 Jun 2024 01:45:55 +0000 (18:45 -0700)]
drm/xe/oa/uapi: Add OA data formats
Add and initialize supported OA data formats for various platforms
(including Xe2). User can request OA data in any supported format.
Bspec: 52198, 60942, 61101
v2: Start 'xe_oa_format_name' enum from 0 (Umesh)
Fix error rewind with OA (Umesh)
v3: Use graphics versions rather than absolute platform names
v4: Add missing kernel doc for struct memebers and enum and other minor
changes (Michal)
Ashutosh Dixit [Tue, 18 Jun 2024 01:45:54 +0000 (18:45 -0700)]
drm/xe/perf/uapi: Add perf_stream_paranoid sysctl
Normally only superuser/root can access perf counter data. However,
superuser can set perf_stream_paranoid sysctl to 0 to allow non-privileged
users to also access perf data. perf_stream_paranoid is introduced at the
perf layer to allow different perf stream types to share this access
mechanism.
v2: Add kernel doc for non-static functions (Michal)
Ashutosh Dixit [Tue, 18 Jun 2024 01:45:53 +0000 (18:45 -0700)]
drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types
In Xe, the plan is to support multiple types of perf counter streams (OA is
only one type of these streams). Rather than introduce NxM ioctls for
these (N perf streams with M ioctl's per perf stream), we decide to
multiplex these (N different stream types and the M ops for each of these
stream types) through a single PERF ioctl. This multiplexing is the purpose
of the PERF layer.
In addition to PERF DRM ioctl's, another set of ioctl's on the PERF fd are
defined. These are expected to be common to different PERF stream types and
therefore defined at the PERF layer itself.
v2: Add param_size to 'struct drm_xe_perf_param' (Umesh)
v3: Rename 'enum drm_xe_perf_ops' to
'enum drm_xe_perf_ioctls' (Guy Zadicario)
Add DRM_ prefix to ioctl names to indicate uapi names
v4: Add 'enum drm_xe_perf_op' previously missed out (Guy Zadicario)
v5: Squash the ops and PERF layer patches into a single patch (Umesh)
Remove param_size from struct 'drm_xe_perf_param' (Umesh)
v6: Add DRM_XE_PERF_IOCTL_STATUS
v7: Add DRM_XE_PERF_IOCTL_INFO
v8: Fix Copyright years, fix DRM_XE_PERF_TYPE_MAX, move '#include
"xe_perf.h"' to xe_perf.c, add kernel doc (Michal)
Lucas De Marchi [Tue, 18 Jun 2024 05:00:44 +0000 (22:00 -0700)]
drm/xe/xe2: Add proper check for media in Wa_14020756599
A temporary fixup was made in commit 24d0d98af1c3 ("drm/xe/xe2lpm: Fixup
Wa_14020756599") due to limitations in the RTP infra. Now that RTP has
support for OR condition that change can be removed. RTP now also
supports checking any GT, so use that instead of the more specific
xe_rtp_match_when_media2000() used in that commit.
Lucas De Marchi [Tue, 18 Jun 2024 05:00:43 +0000 (22:00 -0700)]
drm/xe/rtp: Add match on any GT
One surprising factor of GRAPHICS_VERSION()/MEDIA_VERSION() matching for
people adding new WAs is that it implicitly checks that the
graphics/media IP under check is of that specific type and not that the
device contains a media/graphics IP of that version. Add a new
*_ANY_GT() variant that can be used in that case.
Lucas De Marchi [Tue, 18 Jun 2024 05:00:42 +0000 (22:00 -0700)]
drm/xe/rtp: Allow to OR rules
Some workarounds started to depend on different set of conditions where
the action should be applied if any of them match. See e.g.
commit 24d0d98af1c3 ("drm/xe/xe2lpm: Fixup Wa_14020756599"). Add
XE_RTP_MATCH_OR that allows to implement a logical OR for the rules.
Normal precedence applies:
r1, r2, OR, r3
means
(r1 AND r2) OR r3
The check is shortcut as soon as a set of conditions match.
v2: Do not match on empty number of rules-other-than-OR evaluated
Lucas De Marchi [Tue, 18 Jun 2024 05:00:41 +0000 (22:00 -0700)]
drm/xe/rtp: Expand max rules/actions per entry
Having at most 4 rules per entry is already reaching the maximum.
Expand it to 6 to allow for more room. With the addition of OR
condition for rules, this will very soon not be sufficient.
Michal Wajdeczko [Mon, 17 Jun 2024 15:47:36 +0000 (17:47 +0200)]
drm/xe/vf: Don't touch GuC irq registers if using memory irqs
On platforms where VFs are using memory based interrupts, we
missed invalid access to no longer existing interrupt registers,
as we keep them marked with XE_REG_OPTION_VF. To fix that just
either setup memirq vectors in GuC or enable legacy interrupts.
Michal Wajdeczko [Mon, 17 Jun 2024 12:26:13 +0000 (14:26 +0200)]
drm/xe: Allow const pointer when checking SR-IOV mode
It seems that more and more parts of the driver code rely on
having only a const pointer to the xe_device. Allow to check
SR-IOV mode in that code as well.
Michal Wajdeczko [Thu, 13 Jun 2024 15:34:24 +0000 (17:34 +0200)]
drm/xe/uc: Fix and start using xe_uc_fw_sanitize()
Helper xe_uc_fw_sanitize() was defined but never used. First fix
it by properly exiting also from the LOAD_FAIL state, then use it
in GuC and HuC sanitize code.
Michal Wajdeczko [Fri, 14 Jun 2024 10:14:15 +0000 (12:14 +0200)]
drm/xe: Use fixed CCS mode when running in SR-IOV mode
We don't support changing CCS mode when running in SR-IOV mode yet.
When running as a PF driver just apply default ccs_mode=1 that VF
drivers will assume as already applied and fixed.
Matthew Brost [Tue, 11 Jun 2024 14:40:53 +0000 (07:40 -0700)]
drm/xe: Sample ctx timestamp to determine if jobs have timed out
In GuC TDR sample ctx timestamp to determine if jobs have timed out. The
scheduling enable needs to be toggled to properly sample the timestamp.
If a job has not been running for longer than the timeout period,
re-enable scheduling and restart the TDR.
v2:
- Use GT clock to msec helper (Umesh, off list)
- s/ctx_timestamp_job/ctx_job_timestamp
v3:
- Fix state machine for TDR, mainly decouple sched disable and
deregister (testing)
- Rebase (CI)
v4:
- Fix checkpatch && newline issue (CI)
- Do not deregister on wedged or unregistered (CI)
- Fix refcounting bugs (CI)
- Move devcoredump above VM / kernel job check (John H)
- Add comment for check_timeout state usage (John H)
- Assert pending disable not inflight when enabling scheduling (John H)
- Use enable_scheduling in other scheduling enable code (John H)
- Add comments on a few steps in TDR (John H)
- Add assert for timestamp overflow protection (John H)
v6:
- Use mul_u64_u32_div (CI, checkpath)
- Change check time to dbg level (Paulo)
- Add immediate mode to sched disable (inspection)
- Use xe_gt_* messages (John H)
- Fix typo in comment (John H)
- Check timeout before clearing pending disable (Paulo)
v7:
- Fix ADJUST_FIVE_PERCENT macro (checkpatch)
- Don't print sched disable failure message on GT reset (John H)
- Move kernel / VM jobs WARNs near comment (John H)
MI_COPY_MEM_MEM GPU instructions are used to copy ctx timestamp from a
LRC registers to another location at the beginning of every jobs
execution. Add MI_COPY_MEM_MEM GPU instruction definitions.
v2:
- Include MI_COPY_MEM_MEM based on instruction order (Michal)
- Fix tabs/spaces issue (Michal)
- Use macro for DW definition (Michal)
Radhakrishna Sripada [Fri, 7 Jun 2024 18:29:43 +0000 (11:29 -0700)]
drm/xe: Add reg read/write trace
This will help debug register read/writes and provides
a way to trace all the mmio transactions.
v2: Fix kunit error
v3: Print devid to help in multi-gpu setup
v3: rebase and use variable sized variant to display
dev name(Gustavo)
v4: Pass single argument to __asign_str to fix kunit error
v5: Remove unrelated include xe_tile.h and remove cast in trace
Radhakrishna Sripada [Fri, 7 Jun 2024 18:29:42 +0000 (11:29 -0700)]
drm/xe/trace: Print device_id in xe_trace events
In multi-gpu environments it is important to know the device
gt events belongs to. The tracing information includes the device_id
to indicate the device the event is associated with.
v2: Use variable sized variant to display dev name(Gustavo)
v3: Pass single argument to __assign_str to fix kunit error
v4: Remove unused sting_helper library include
Radhakrishna Sripada [Fri, 7 Jun 2024 18:29:41 +0000 (11:29 -0700)]
drm/xe/trace: Print device_id in xe_trace_guc events
In multi-gpu environments it is important to know the device
guc txn belongs to. The tracing information includes the device_id
to indicate the device the event is associated with.
v2: Use variable sized variant to display dev name(Gustavo)
v3: Pass single argument to __assign_str to fix kunit error
v4: Minor formatting tweaks
Radhakrishna Sripada [Fri, 7 Jun 2024 18:29:40 +0000 (11:29 -0700)]
drm/xe/trace: Print device_id in xe_trace_bo events
In multi-gpu environments it is important to know the device
bo/vm belongs to. The tracing information includes the device_id
to indicate the device the event is associated with.
v2: Use variable sized variant to display dev name(Gustavo)
v3: Pass single argument to __assign_str to fix kunit error
v4: Minor cleanups(Gustavo)
José Roberto de Souza [Tue, 11 Jun 2024 17:47:16 +0000 (10:47 -0700)]
drm/xe: Increase devcoredump timeout
5 minutes is too short for a regular user to search and understand
what he needs to do to report capture devcoredump and report a bug to
us, so here increasing this timeout to 1 hour.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240611174716.72660-2-jose.souza@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
José Roberto de Souza [Tue, 11 Jun 2024 17:47:15 +0000 (10:47 -0700)]
devcoredump: Add dev_coredumpm_timeout()
Add function to set a custom coredump timeout.
For Xe driver usage, current 5 minutes timeout may be too short for
users to search and understand what needs to be done to capture
coredump to report bugs.
We have plans to automate(distribute a udev script) it but at the end
will be up to distros and users to pack it so having a option to
increase the timeout is a safer option.
v2:
- replace dev_coredump_timeout_set() by dev_coredumpm_timeout() (Mukesh)
v3:
- make dev_coredumpm() static inline (Johannes)
v5:
- rename DEVCOREDUMP_TIMEOUT -> DEVCD_TIMEOUT to avoid redefinition
in include/net/bluetooth/coredump.h
v6:
- fix definition of dev_coredumpm_timeout() when CONFIG_DEV_COREDUMP
is disabled
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Mukesh Ojha <quic_mojha@quicinc.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Link: https://patchwork.freedesktop.org/patch/msgid/20240611174716.72660-1-jose.souza@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Michal Wajdeczko [Tue, 11 Jun 2024 16:35:37 +0000 (18:35 +0200)]
drm/xe/vf: Ignore force-wake requests if VF
The control and ack force-wake registers are not accessible for
the VF drivers. To avoid changing existing code logic that tracks
woken domains, simply ignore all attempts to access control or ack
registers if we are running as a VF driver.
Tejas Upadhyay [Fri, 7 Jun 2024 12:25:28 +0000 (17:55 +0530)]
drm/xe/xe2lpm: Fixup Wa_14020756599
This WA needs to be applied to graphics GT when the media version
is 2000. Currently, media version 2000 is always paired with
graphics version 2004 which will result in writing same register
with same bits twice. We can't add optional rule in rtp
framework and also writing same register with same bits gives
warning.
Currently, media version 2000 is always paired with graphics version
2004, so just checking the latter is sufficient.
V2(Lucas):
- Add more detail in commit message
- Improve code comment to follow guideline
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2016 Fixes: 131328aa5699 ("drm/xe/xe2lpm: Add permanent Wa_14020756599") Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240607122528.1048610-1-tejas.upadhyay@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Display (i915):
- Add missing include to intel_vga.c (Michal Wajdeczko)
Driver Changes:
- Fix Display (xe-only) detection for ADL-N (Lucas)
- Runtime PM fixes that enabled PC-10 and D3Cold (Francois, Rodrigo)
- Fix unexpected silent drm backmerge issues (Thomas)
- More (a lot more) preparation for SR-IOV support (Michal Wajdeczko)
- Devcoredump fixes and improvements (Jose, Tejas, Matt Brost)
- Introduce device 'wedged' state (Rodrigo)
- Improve debug and info messages (Michal Wajdeczko, Rodrigo, Nirmoy)
- Adding or fixing workarounds (Tejas, Shekhar, Lucas, Bommu)
- Check result of drmm_mutex_init (Michal Wajdeczko)
- Enlarge the critical dma fence area for preempt fences (Matt Auld)
- Prevent UAF in VM's rebind work (Matt Auld)
- GuC submit related clean-ups and fixes (Matt Brost, Himal, Jonathan, Niranjana)
- Prefer local helpers to perform dma reservation locking (Himal)
- Spelling and typo fixes (Colin, Francois)
- Prep patches for 1 job per VM bind IOCTL (no uapi change yet) (Matt Brost)
- Remove uninitialized end var from xe_gt_tlb_invalidation_range (Nirmoy)
- GSC related changes targeting LNL support (Daniele)
- Fix assert in L3 bank mask generation (Francois)
- Perform dma_map when moving system buffer objects to TT (Thomas)
- Add helpers for manipulating macro arguments (Michal Wajdeczko)
- Refactor default device atomic settings (Nirmoy)
- Add debugfs node to dump mocs (Janga)
- Use ordered WQ for G2H handler (Matt Brost)
- Clean up and fixes in header includes (Michal Wajdeczko)
- Prefer flexible-array over deprecated zero-lenght ones (Lucas)
- Add Indirect Ring State support (Niranjana)
- Fix UBSAN shift-out-of-bounds failure (Shuicheng)
- HWMon fixes and additions (Karthik)
- Clean-up refactor around probe init functions (Lucas, Michal Wajdeczko)
- Fix PCODE init function (Himal)
- Only use reserved BCS instances for usm migrate exec queue (Matt Brost)
- Only zap PTEs as needed (Matt Brost)
- Per client usage info (Lucas)
- Core hotunplug improvements converting stuff towards devm (Matt Auld)
- Don't emit false error if running in execlist mode (Michal Wajdeczko)
- Remove unused struct (Dr. David)
- Support/debug for slow GuC loads (John Harrison)
- Decouple job seqno and lrc seqno (Matt Brost)
- Allow migrate vm gpu submissions from reclaim context (Thomas)
- Rename drm-client running time to run_ticks and fix a UAF (Umesh)
- Check empty pinned BO list with lock held (Nirmoy)
- Drop undesired prefix from the platform name (Michal Wajdeczko)
- Remove unwanted mutex locking on xe file close (Niranjana)
- Replace format-less snprintf() with strscpy() (Arnd)
- Other general clean-ups on registers definitions and function names (Michal Wajdeczko)
- Add kernel-doc to some xe_lrc interfaces (Niranajana)
- Use missing lock in relay_needs_worker (Nirmoy)
- Drop redundant W=1 warnings from Makefile (Jani)
- Simplify if condition in preempt fences code (Thorsten)
- Flush engine buffers before signalling user fence on all engines (Andrzej)
- Don't overmap identity VRAM mapping (Matt Brost)
- Do not dereference NULL job->fence in trace points (Matt Brost)
- Add synchronous gt reset debugfs (Jonathan)
- Xe gt_idle fixes (Riana)
drm/xe: Ensure caller uses sole domain for xe_force_wake_assert_held
xe_force_wake_assert_held() is designed to confirm a particular
forcewake domain's wakefulness; it doesn't verify the wakefulness of
multiple domains. Make sure the caller doesn't input multiple
domains(XE_FORCEWAKE_ALL) as a parameter.
v2
- use domain != XE_FORCEWAKE_ALL (Michal)
v3
- Add kernel-doc
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Badal Nilawar <badal.nilawar@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240607125741.1407331-1-himal.prasad.ghimiray@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Michal Wajdeczko [Sun, 9 Jun 2024 18:19:31 +0000 (20:19 +0200)]
drm/xe/guc: Prefer GT oriented messages in xe_guc_pc
If possible, we should prefer xe_gt_err() over drm_err().
While at it, improve and fix some of the error messages.
Also drop unnecessary "xe_gt_sysfs.h" include.
Michal Wajdeczko [Sun, 9 Jun 2024 18:19:30 +0000 (20:19 +0200)]
drm/xe/guc: Add pc_to_ct() helper
We are converting xe_guc_pc to xe_guc_ct few times already.
Add simple helper function to avoid code duplication.
While at it, simplify other helper functions and fix order
of local variables to match the guideline.
Michal Wajdeczko [Sun, 9 Jun 2024 18:19:29 +0000 (20:19 +0200)]
drm/xe/guc: Move H2G SETUP_PC_GUCRC definition to SLPC ABI
We already have a dedicated file for GuC SLPC ABI definitions.
Move definition of the SETUP_PC_GUCRC action and related enum
to that file, rename them to match format of other new ABI
definitions and add simple kernel-doc.
Michal Wajdeczko [Fri, 7 Jun 2024 15:31:55 +0000 (17:31 +0200)]
drm/xe/pf: Assert LMEM provisioning is done only on DGFX
The Local Memory (aka VRAM) is only available on DGFX platforms.
We shouldn't attempt to provision VFs with LMEM or attempt to
update the LMTT on non-DGFX platforms. Add missing asserts that
would enforce that and fix release code that could crash on iGFX
due to uninitialized LMTT.
Linus Torvalds [Sun, 9 Jun 2024 16:04:51 +0000 (09:04 -0700)]
Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update copies of kernel headers, which resulted in support for the
new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
'map_shadow_stack' syscall for x86-32.
- Revert perf.data record memory allocation optimization that ended up
causing a regression, work is being done to re-introduce it in the
next merge window.
- Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
interrupting the build.
* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
tools headers UAPI: Update i915_drm.h with the kernel sources
tools headers UAPI: Sync kvm headers with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync linux/stat.h with the kernel sources
Linus Torvalds [Sun, 9 Jun 2024 15:49:13 +0000 (08:49 -0700)]
Merge tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Convert PCI core error codes to proper error numbers since latter get
propagated all the way up to the module loading functions
* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Convert PCIBIOS_* return codes to errnos
EDAC/amd64: Convert PCIBIOS_* return codes to errnos
Linus Torvalds [Sun, 9 Jun 2024 02:14:02 +0000 (19:14 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for the SiFive PRCI clocks so that the device boots again.
This driver was registering clkdev lookups that were always going to
be useless. This wasn't a problem until clkdev started returning an
error in these cases, causing this driver to fail probe, and thus boot
to fail because clks are essential for most drivers. The fix is
simple, don't use clkdev because this is a DT based system where
clkdev isn't used"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sifive: Do not register clkdevs for PRCI clocks
Linus Torvalds [Sun, 9 Jun 2024 02:07:18 +0000 (19:07 -0700)]
Merge tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Two small smb3 client fixes:
- fix deadlock in umount
- minor cleanup due to netfs change"
* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Don't advance the I/O iterator before terminating subrequest
smb: client: fix deadlock in smb2_find_smb_tcon()
Linus Torvalds [Sat, 8 Jun 2024 17:12:33 +0000 (10:12 -0700)]
Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the initial state of the save button in 'make gconfig'
- Improve the Kconfig documentation
- Fix a Kconfig bug regarding property visibility
- Fix build breakage for systems where 'sed' is not installed in /bin
- Fix a false warning about missing MODULE_DESCRIPTION()
* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
kconfig: remove wrong expr_trans_bool()
kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
kconfig: doc: fix a typo in the note about 'imply'
kconfig: gconf: give a proper initial state to the Save button
kconfig: remove unneeded code for user-supplied values being out of range
Linus Torvalds [Sat, 8 Jun 2024 16:57:09 +0000 (09:57 -0700)]
Merge tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fixes for the new ipu6 driver (and related fixes to mei csi driver)
- fix a double debugfs remove logic at mgb4 driver
- a documentation fix
* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: intel/ipu6: add csi2 port sanity check in notifier bound
media: intel/ipu6: update the maximum supported csi2 port number to 6
media: mei: csi: Warn less verbosely of a missing device fwnode
media: mei: csi: Put the IPU device reference
media: intel/ipu6: fix the buffer flags caused by wrong parentheses
media: intel/ipu6: Fix an error handling path in isys_probe()
media: intel/ipu6: Move isys_remove() close to isys_probe()
media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
media: Documentation: v4l: Fix ACTIVE route flag
media: mgb4: Fix double debugfs remove
Linus Torvalds [Sat, 8 Jun 2024 16:44:50 +0000 (09:44 -0700)]
Merge tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix possible memory leak the riscv-intc irqchip driver load failures
- Fix boot crash in the sifive-plic irqchip driver caused by recently
changed boot initialization order
- Fix race condition in the gic-v3-its irqchip driver
* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails
Linus Torvalds [Sat, 8 Jun 2024 16:36:08 +0000 (09:36 -0700)]
Merge tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous fixes:
- Fix kexec() crash if call depth tracking is enabled
- Fix SMN reads on inaccessible registers on certain AMD systems"
* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_nb: Check for invalid SMN reads
x86/kexec: Fix bug with call depth tracking
Linus Torvalds [Sat, 8 Jun 2024 16:26:59 +0000 (09:26 -0700)]
Merge tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix race between perf_event_free_task() and perf_event_release_kernel()
that can result in missed wakeups and hung tasks"
* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing wakeup when waiting for context reference
Linus Torvalds [Sat, 8 Jun 2024 16:03:46 +0000 (09:03 -0700)]
Merge tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking doc fix from Ingo Molnar:
"Fix typos in the kerneldoc of some of the atomic APIs"
* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc
Linus Torvalds [Sat, 8 Jun 2024 00:01:10 +0000 (17:01 -0700)]
Merge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes, 6 of which are cc:stable.
All except the nilfs2 fix affect MM and all are singletons - see the
chagelogs for details"
* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
mm: fix xyz_noprof functions calling profiled functions
codetag: avoid race at alloc_slab_obj_exts
mm/hugetlb: do not call vma_add_reservation upon ENOMEM
mm/ksm: fix ksm_zero_pages accounting
mm/ksm: fix ksm_pages_scanned accounting
kmsan: do not wipe out origin when doing partial unpoisoning
vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
mm: page_alloc: fix highatomic typing in multi-block buddies
nilfs2: fix potential kernel bug due to lack of writeback flag waiting
memcg: remove the lockdep assert from __mod_objcg_mlstate()
mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
mm: drop the 'anon_' prefix for swap-out mTHP counters
Linus Torvalds [Fri, 7 Jun 2024 23:54:57 +0000 (16:54 -0700)]
Merge tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- interrupt handling and Kconfig fixes for gpio-tqmx86
- add a buffer for storing output values in gpio-tqmx86 as reading back
the registers always returns the input values
- add missing MODULE_DESCRIPTION()s to several GPIO drivers
* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: add missing MODULE_DESCRIPTION() macros
gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
gpio: tqmx86: store IRQ trigger type and unmask status separately
gpio: tqmx86: introduce shadow register for GPIO output value
gpio: tqmx86: fix typo in Kconfig label
Linus Torvalds [Fri, 7 Jun 2024 23:45:48 +0000 (16:45 -0700)]
Merge tag 'block-6.10-20240607' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix for null_blk block size validation (Andreas)
- NVMe pull request via Keith:
- Use reserved tags for special fabrics operations (Chunguang)
- Persistent Reservation status masking fix (Weiwen)
* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
null_blk: fix validation of block size
nvme: fix nvme_pr_* status code parsing
nvme-fabrics: use reserved tag for reg read/write command
Linus Torvalds [Fri, 7 Jun 2024 23:43:07 +0000 (16:43 -0700)]
Merge tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix a locking order issue with setting max async thread workers
(Hagar)
- Fix for a NULL pointer dereference for failed async flagged requests
using ring provided buffers. This doesn't affect the current kernel,
but it does affect older kernels, and is being queued up for 6.10
just to make the stable process easier (me)
- Fix for NAPI timeout calculations for how long to busy poll, and
subsequently how much to sleep post that if a wait timeout is passed
in (me)
- Fix for a regression in this release cycle, where we could end up
using a partially unitialized match value for io-wq (Su)
* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
io_uring: fix possible deadlock in io_register_iowq_max_workers()
io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
io_uring/napi: fix timeout calculation
io_uring: check for non-NULL file pointer in io_file_can_poll()
projects / users / dwmw2 / linux.git / log