Simon Trimmer [Wed, 19 Jun 2024 12:17:03 +0000 (13:17 +0100)]
spi: cs42l43: Add speaker id support to the bridge configuration
OEMs can connect a number of types of speakers to the sidecar cs35l56
amplifiers and a different speaker requires a different firmware
configuration.
When the cs42l43 ACPI includes a property indicating a particular type
of speaker has been installed this should be passed to the cs35l56
driver instances as a device property.
Charles Keepax [Wed, 19 Jun 2024 12:17:02 +0000 (13:17 +0100)]
spi: cs42l43: Refactor accessing the SDCA extension properties
Refactor accessing the SDCA extension properties to make it easier to
access multiple properties to assist with future features. Return the
node itself and allow the caller to read the actual properties.
Marc Kleine-Budde [Tue, 18 Jun 2024 17:34:18 +0000 (19:34 +0200)]
spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
The patch 15a6af94a277 ("spi: Increase imx51 ecspi burst length based
on transfer length") increased the burst length calculation in
mx51_ecspi_prepare_transfer() to be based on the transfer length.
This breaks HW CS + SPI_CS_WORD support which was added in 6e95b23a5b2d ("spi: imx: Implement support for CS_WORD") and transfers
with bits-per-word != 8, 16, 32.
SPI_CS_WORD means the CS should be toggled after each word. The
implementation in the imx-spi driver relies on the fact that the HW CS
is toggled automatically by the controller after each burst length
number of bits. Setting the burst length to the number of bits of the
_whole_ message breaks this use case.
Further the patch 15a6af94a277 ("spi: Increase imx51 ecspi burst
length based on transfer length") claims to optimize the transfers.
But even without this patch, on modern spi-imx controllers with
"dynamic_burst = true" (imx51, imx6 and newer), the transfers are
already optimized, i.e. the burst length is dynamically adjusted in
spi_imx_push() to avoid the pause between the SPI bursts. This has
been confirmed by a scope measurement on an imx6d.
Subsequent Patches tried to fix these and other problems:
- 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits")
- e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma")
- c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
- cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
but the HW CS + SPI_CS_WORD use case is still broken.
To fix the problems revert the burst size calculation in
mx51_ecspi_prepare_transfer() back to the original form, before 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on
transfer length") was applied.
Cc: Stefan Moring <stefan.moring@technolution.nl> Cc: Stefan Bigler <linux@bigler.io> Cc: Clark Wang <xiaoning.wang@nxp.com> Cc: Carlos Song <carlos.song@nxp.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Thorsten Scherer <T.Scherer@eckelmann.de> Fixes: 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length") Fixes: 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits") Fixes: e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma") Fixes: c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode") Fixes: cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length") Link: https://lore.kernel.org/all/20240618-oxpecker-of-ideal-mastery-db59f8-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Thorsten Scherer <t.scherer@eckelmann.de> Link: https://msgid.link/r/20240618-spi-imx-fix-bustlength-v1-1-2053dd5fdf87@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
Amit Kumar Mahapatra [Mon, 17 Jun 2024 15:38:37 +0000 (21:08 +0530)]
spi: spi-cadence: Enable spi refclk in slave mode
When spi-cadence is configured as a slave, it requires the SPI refclk to
detect the synchronization start condition while communicating with the
master. However, the spi-cadence driver never enables the SPI refclk in
slave mode, causing the refclk to remain disabled if the
"clk_ignore_unused" kernel parameter is not passed through bootargs.
As a result, the slave cannot detect data sent by the master, leading to
communication failure. Update driver to enable the SPI refclk in both
master and slave configurations.
Amit Kumar Mahapatra [Mon, 17 Jun 2024 15:30:52 +0000 (21:00 +0530)]
spi: Fix SPI slave probe failure
While adding a SPI device, the SPI core ensures that multiple logical CS
doesn't map to the same physical CS. For example, spi->chip_select[0] !=
spi->chip_select[1] and so forth. However, unlike the SPI master, the SPI
slave doesn't have the list of chip selects, this leads to probe failure
when the SPI controller is configured as slave. Update the
__spi_add_device() function to perform this check only if the SPI
controller is configured as master.
Charles Keepax [Tue, 11 Jun 2024 13:25:54 +0000 (14:25 +0100)]
spi: cs42l43: Refactor accessing the SDCA extension properties
Refactor accessing the SDCA extension properties to make it easier to
access multiple properties to assist with future features. Return the
node itself and allow the caller to read the actual properties.
Patrice Chotard [Tue, 18 Jun 2024 13:29:50 +0000 (15:29 +0200)]
spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
In case usage of OCTAL mode, buswidth parameter can take the value 8.
As return value of stm32_qspi_get_mode() is used to configure fields
of CCR registers that are 2 bits only (fields IMODE, ADMODE, ADSIZE,
DMODE), clamp return value of stm32_qspi_get_mode() to 4.
Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback") Cc: stable@vger.kernel.org Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://msgid.link/r/20240618132951.2743935-3-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Tue, 11 Jun 2024 10:38:25 +0000 (11:38 +0100)]
spi: Rework DMA mapped flag
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
The first part of the series (patches 1 to 7) is an introduction
of a new helper followed by the user conversion.
This consolidates the same code and also makes patch 8 (last one)
be localised to the SPI core part.
The last patch is the main rework to get rid of a recently introduced
hack with a dummy SG list and move to the transfer-based DMA mapped
flag.
That said, the patches 1 to 7 may be applied right away since they
have no functional change intended, while the last one needs more
testing and reviewing.
Andy Shevchenko [Fri, 31 May 2024 19:42:40 +0000 (22:42 +0300)]
spi: Rework per message DMA mapped flag to be per transfer
The granularity of DMA mappings is transfer and moreover,
the direction is also important as it can be unidirect.
The current cur_msg_mapped flag doesn't fit well the DMA mapping
and syncing calls and we have tons of checks around on top of it.
So, instead of doing that rework the code to use per transfer per
direction flag to show if it's DMA mapped or not.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Link: https://lore.kernel.org/r/20240531194723.1761567-9-andriy.shevchenko@linux.intel.com Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Andy Shevchenko [Fri, 31 May 2024 19:42:39 +0000 (22:42 +0300)]
spi: qup: Use new spi_xfer_is_dma_mapped() helper
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Link: https://lore.kernel.org/r/20240531194723.1761567-8-andriy.shevchenko@linux.intel.com Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Andy Shevchenko [Fri, 31 May 2024 19:42:38 +0000 (22:42 +0300)]
spi: pci1xxxx: Use new spi_xfer_is_dma_mapped() helper
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Link: https://lore.kernel.org/r/20240531194723.1761567-7-andriy.shevchenko@linux.intel.com Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Andy Shevchenko [Fri, 31 May 2024 19:42:37 +0000 (22:42 +0300)]
spi: pxa2xx: Use new spi_xfer_is_dma_mapped() helper
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Link: https://lore.kernel.org/r/20240531194723.1761567-6-andriy.shevchenko@linux.intel.com Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Andy Shevchenko [Fri, 31 May 2024 19:42:36 +0000 (22:42 +0300)]
spi: omap2-mcspi: Use new spi_xfer_is_dma_mapped() helper
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Link: https://lore.kernel.org/r/20240531194723.1761567-5-andriy.shevchenko@linux.intel.com Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Andy Shevchenko [Fri, 31 May 2024 19:42:35 +0000 (22:42 +0300)]
spi: ingenic: Use new spi_xfer_is_dma_mapped() helper
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Link: https://lore.kernel.org/r/20240531194723.1761567-4-andriy.shevchenko@linux.intel.com Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Andy Shevchenko [Fri, 31 May 2024 19:42:34 +0000 (22:42 +0300)]
spi: dw: Use new spi_xfer_is_dma_mapped() helper
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Link: https://lore.kernel.org/r/20240531194723.1761567-3-andriy.shevchenko@linux.intel.com Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
There are few drivers that use the same pattern to check if the transfer
is DMA mapped or not. Provide a helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Link: https://lore.kernel.org/r/20240531194723.1761567-2-andriy.shevchenko@linux.intel.com Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Fri, 7 Jun 2024 10:34:23 +0000 (11:34 +0100)]
spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz
Some internals of the cs35l56 can only support SPI speeds of up to
11MHz. Whilst some use-cases could support higher rates, keep things
simple by dropping the SPI speed down to this avoid any potential
issues.
Andy Shevchenko [Wed, 5 Jun 2024 20:53:15 +0000 (23:53 +0300)]
regmap: spi: Fix potential off-by-one when calculating reserved size
If we ever meet a hardware that uses weird register bits and padding,
we may end up in off-by-one error since x/8 + y/8 might not be equal
to (x + y)/8 in some cases.
bits pad x/8+y/8 (x+y)/8
4..7 0..3 0 0 // x + y from 4 up to 7
4..7 4..7 0 1 // x + y from 8 up to 11
4..7 8..11 1 1 // x + y from 12 up to 15
8..15 0..7 1 1 // x + y from 8 up to 15
8..15 8..15 2 2 // x + y from 16 up to 23
Charles Keepax [Tue, 4 Jun 2024 13:17:04 +0000 (14:17 +0100)]
spi: cs42l43: Correct SPI root clock speed
The root clock is actually 49.152MHz not 40MHz, as it is derived from
the primary audio clock, update the driver to match. This error can
cause the actual clock rate to be higher than the requested clock rate
on the SPI bus.
Andy Shevchenko [Thu, 30 May 2024 15:10:06 +0000 (18:10 +0300)]
spi: pxa2xx: Move platform driver to a separate file
The spi-pxa2xx.c is bloated with a platform driver code while
pretending to provide a core functionality. Make it real core
library by splitting out the platform driver to a separate file.
In preparation of the extracting platform driver from spi-pxa2xx.c
split the probe and remove functions so we have bus independent
and platform device ones.
Andy Shevchenko [Thu, 30 May 2024 15:10:04 +0000 (18:10 +0300)]
spi: pxa2xx: Remove superflous check for Intel Atom SoCs
pxa2xx_spi_fw_translate_cs() checks for the ACPI companion device
presence along with the SSP type. But the SSP type is uniquely
determines the case. Hence remove the superflous check.
Andy Shevchenko [Thu, 30 May 2024 15:10:03 +0000 (18:10 +0300)]
spi: pxa2xx: Remove duplicate check
The mmio_base can't be NULL at this point. It's either checked
in both pxa_ssp_probe() and pxa2xx_spi_init_ssp() or correctly
provided by PCI core. Hence, remove duplicate check which is
a dead code.
Andy Shevchenko [Thu, 30 May 2024 15:09:59 +0000 (18:09 +0300)]
spi: pxa2xx: Remove no more needed driver data
Since the ACPI enumerated devices provide a property with SSP type,
there is no more necessity to bear the copy of them in the ID table.
Drop the driver data in ACPI ID table.
Andy Shevchenko [Thu, 30 May 2024 15:09:58 +0000 (18:09 +0300)]
spi: pxa2xx: Reorganize the SSP type retrieval
The old Intel platforms, such as Intel Braswell, also provide
the property of SSP type. Reorganize the pxa2xx_spi_init_pdata()
to take that into account.
Andy Shevchenko [Thu, 30 May 2024 15:09:57 +0000 (18:09 +0300)]
spi: pxa2xx: Wrap pxa_ssp_request() to be device managed resource
In the error path or remove path the reference counter in PXA SSP driver
may be dropped before the other resources, that were allocated after
bumbing the reference counter. This breaks reversed order of freeing and
might have an undesired side effects. Prevent this from happening by
wrapping pxa_ssp_request() to be device managed resource.
Linus Torvalds [Sun, 2 Jun 2024 20:30:53 +0000 (13:30 -0700)]
Merge tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add a quirk for three different devices that have shown issues with
LPM (link power management). These devices appear to not implement
LPM properly, since we see command timeouts when enabling LPM. The
quirk disables LPM for these problematic devices. (Me)
- Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
needed and was originally added by mistake when LPM support was
enabled for this AHCI controller. Enabling the quirk when not needed
causes the the controller to not be able to detect the connected
devices on some platforms.
* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
Linus Torvalds [Sun, 2 Jun 2024 16:32:34 +0000 (09:32 -0700)]
Merge tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous topology parsing fixes:
- Fix topology parsing regression on older CPUs in the new AMD/Hygon
parser
- Fix boot crash on odd Intel Quark and similar CPUs that do not fill
out cpuinfo_x86::x86_clflush_size and zero out
cpuinfo_x86::x86_cache_alignment as a result.
Provide 32 bytes as a general fallback value.
- Fix topology enumeration on certain rare CPUs where the BIOS locks
certain CPUID leaves and the kernel unlocked them late, which broke
with the new topology parsing code. Factor out this unlocking logic
and move it earlier in the parsing sequence"
* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/intel: Unlock CPUID before evaluating anything
x86/cpu: Provide default cache line size if not enumerated
x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater
* tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add missing MODULE_DESCRIPTION() lines
perf/x86/rapl: Add missing MODULE_DESCRIPTION() line
Linus Torvalds [Sun, 2 Jun 2024 16:15:28 +0000 (09:15 -0700)]
Merge tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
strings
- mailmap: update entry for Kees Cook
- kunit/fortify: Remove __kmalloc_node() test
* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kunit/fortify: Remove __kmalloc_node() test
mailmap: update entry for Kees Cook
scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
Linus Torvalds [Sun, 2 Jun 2024 00:34:35 +0000 (17:34 -0700)]
Merge tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Enforce full ordering for ATOMIC operations with BPF_FETCH
- Fix uaccess build errors seen with GCC 13/14
- Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT
- Drop error message from lparcfg guest name lookup
Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.
* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
powerpc/uaccess: Use YZ asm constraint for ld
powerpc/uaccess: Fix build errors seen with GCC 13/14
powerpc/pseries/lparcfg: drop error message from guest name lookup
powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH
Linus Torvalds [Sun, 2 Jun 2024 00:05:00 +0000 (17:05 -0700)]
Merge tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"After merging a commit 1fffe7a34c89 ("script: modpost: emit a warning
when the description is missing"), MODULE_DESCRIPTOR seems to be
mandatory for kernel modules. In FireWire subsystem, the most of
practical kernel modules have the field, while KUnit test modules do
not. A single patch is applied to fix them"
* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: add missing MODULE_DESCRIPTION() to test modules
Linus Torvalds [Sat, 1 Jun 2024 21:35:57 +0000 (14:35 -0700)]
Merge tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Two small smb3 fixes:
- Fix socket creation with sfu mount option (spotted by test generic/423)
- Minor cleanup: fix missing description in two files"
* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix creating sockets when using sfu mount options
fs: smb: common: add missing MODULE_DESCRIPTION() macros
Linus Torvalds [Sat, 1 Jun 2024 16:33:55 +0000 (09:33 -0700)]
Merge tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix a Kconfig bug regarding comparisons to 'm' or 'n'
- Replace missed $(srctree)/$(src)
- Fix unneeded kallsyms step 3
- Remove incorrect "compatible" properties from image nodes in
image.fit
- Improve gen_kheaders.sh
- Fix 'make dt_binding_check'
- Clean up unnecessary code
* tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
dt-bindings: kbuild: Fix dt_binding_check on unconfigured build
kheaders: use `command -v` to test for existence of `cpio`
kheaders: explicitly define file modes for archived headers
scripts/make_fit: Drop fdt image entry compatible string
kbuild: remove a stale comment about cleaning in link-vmlinux.sh
kbuild: fix short log for AS in link-vmlinux.sh
kbuild: change scripts/mksysmap into sed script
kbuild: avoid unneeded kallsyms step 3
kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
kconfig: remove redundant check in expr_join_or()
kconfig: fix comparison to constant symbols, 'm', 'n'
kconfig: remove unused expr_is_no()
Linus Torvalds [Sat, 1 Jun 2024 15:59:04 +0000 (08:59 -0700)]
Merge tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Fix a livelock by dropping an xfarray sortinfo folio when an error
is encountered
- During extended attribute operations, Initialize transaction
reservation computation based on attribute operation code
- Relax symbolic link's ondisk verification code to allow symbolic
links with short remote targets
- Prevent soft lockups when unmapping file ranges and also during
remapping blocks during a reflink operation
- Fix compilation warnings when XFS is built with W=1 option
* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add cond_resched to block unmap range and reflink remap path
xfs: don't open-code u64_to_user_ptr
xfs: allow symlinks with short remote targets
xfs: fix xfs_init_attr_trans not handling explicit operation codes
xfs: drop xfarray sortinfo folio on error
xfs: Stop using __maybe_unused in xfs_alloc.c
xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()
Linus Torvalds [Sat, 1 Jun 2024 15:53:39 +0000 (08:53 -0700)]
Merge tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single revert for a much-reported regression in 6.10-rc1
when it comes to a few older architectures.
Turns out that the VT ioctls don't work the same across all cpu types
because of some old compatibility requrements for stuff like alpha and
powerpc. So revert the change that attempted to have them use the
_IO() macros and go back to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1"
* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "VT: Use macros to define ioctls"
Linus Torvalds [Sat, 1 Jun 2024 15:28:24 +0000 (08:28 -0700)]
Merge tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a wrong path walk triggered by syzkaller"
* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.refer_mount_root
landlock: Fix d_parent walk
Turns out this breaks many architectures as the vt ioctls do not all
match up everywhere due to historical reasons, so the original commit is
invalid for many values.
Linus Torvalds [Fri, 31 May 2024 23:26:48 +0000 (16:26 -0700)]
Merge tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This is the weekly fixes. Lots of small fixes across the board, one
BUG_ON fix in shmem seems most important, otherwise amdgpu, i915, xe
mostly with small fixes to all the other drivers.
shmem:
- fix BUG_ON in COW handling
- warn when trying to pin imported objects
i915:
- fix a race in audio component by registering it later
- make DPT object unshrinkable to avoid shrinking when framebuffer
has not shrunk
- fix CCS id calculation to fix a perf regression
- fix selftest caching mode
- fix FIELD_PREP compiler warnings
- fix indefinite wait for GT wakeref release
- revert overeager multi-gt pm reference removal
xe:
- pcode polling timeout change
- fix for deadlocks for faulting VMs
- error-path lock imbalance fix
amdkfd:
- revert unused changes for certain 11.0.3 devices
- simplify APU VRAM handling
lima:
- fix dma_resv-related deadlock in object pin
msm:
- remove build-time dependency on Python 3.9
nouveau:
- nvif: Fix possible integer overflow
panel:
- lg-sw43408: Select DP helpers; Declare backlight ops as static
- sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel
panfrost:
- fix dma_resv-related deadlock in object pin"
* tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
drm/msm: remove python 3.9 dependency for compiling msm
drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel
drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel
drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel
drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2
drm/amdgpu: Make CPX mode auto default in NPS4
drm/amdkfd: simplify APU VRAM handling
Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices"
drm/amdgpu: fix dereference null return value for the function amdgpu_vm_pt_parent
drm/amdgpu: silence UBSAN warning
drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth()
drm/i915: Fix audio component initialization
drm/i915/dpt: Make DPT object unshrinkable
drm/i915/gt: Fix CCS id's calculation for CCS mode setting
drm/panel/lg-sw43408: mark sw43408_backlight_ops as static
drm/i915/selftests: Set always_coherent to false when reading from CPU
drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER
drm/i915/guc: avoid FIELD_PREP warning
drm/i915/gt: Disarm breadcrumbs if engines are already idle
Revert "drm/i915: Remove extra multi-gt pm-references"
...
Linus Torvalds [Fri, 31 May 2024 23:24:11 +0000 (16:24 -0700)]
Merge tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- sttcs: Fix property spelling
- intel-m10-bmc-hwmon: Fix multiplier for N6000 board power sensor
- ltc2992: Fix memory leak
- dell-smm: Add Dell G15 5511 to fan control whitelist
* tag 'hwmon-for-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (shtc1) Fix property misspelling
hwmon: (intel-m10-bmc-hwmon) Fix multiplier for N6000 board power sensor
hwmon: (ltc2992) Fix memory leak in ltc2992_parse_dt()
hwmon: (dell-smm) Add Dell G15 5511 to fan control whitelist
Linus Torvalds [Fri, 31 May 2024 23:17:40 +0000 (16:17 -0700)]
Merge tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A series of fixes that came in since the merge window, the main thing
being the fixes Andy did for DMA sync where we were calling into the
DMA API in suprising ways and causing issues as a result, the main
thing being confusing the IOMMU code.
We've also got some fairly important fixes for the stm32 driver, it
supports a wide range of hardware and some optimisations that were
done recently have broken on some systems, and a fix to prevent
glitched signals on the bus in the cadence driver"
* tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: Don't warn about spurious interrupts
spi: Assign dummy scatterlist to unidirectional transfers
spi: cadence: Ensure data lines set to low during dummy-cycle period
spi: stm32: Revert change that enabled controller before asserting CS
spi: Check if transfer is mapped before calling DMA sync APIs
spi: Don't mark message DMA mapped when no transfer in it is
Linus Torvalds [Fri, 31 May 2024 23:12:54 +0000 (16:12 -0700)]
Merge tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix that came in since -rc1, fixing misuse of a local variable in
the DT parsing code in the RTQ2208 driver"
* tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Fix invalid memory access when devm_of_regulator_put_matches is called
Linus Torvalds [Fri, 31 May 2024 23:09:27 +0000 (16:09 -0700)]
Merge tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"The I2C bus was not taking account of the register and any padding
bytes when handling maximum write sizes supported by an I2C adaptor,
this patch from Jim Wylder fixes that"
* tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-i2c: Subtract reg size from max_write
- Fix regression in io.max due to throttle low removal (Waiman)
- DM limit table fixes (Christoph)
- SCSI and block limit fixes (Christoph)
- zone fixes (Damien)
- Misc fixes (Christoph, Hannes, hexue)
* tag 'block-6.10-20240530' of git://git.kernel.dk/linux: (25 commits)
blk-throttle: Fix incorrect display of io.max
block: Fix zone write plugging handling of devices with a runt zone
block: Fix validation of zoned device with a runt zone
null_blk: Do not allow runt zone with zone capacity smaller then zone size
nvmet: fix a possible leak when destroy a ctrl during qp establishment
nvme: use srcu for iterating namespace list
bcache: code cleanup in __bch_bucket_alloc_set()
bcache: call force_wake_up_gc() if necessary in check_should_bypass()
bcache: allow allocator to invalidate bucket in gc
block: check for max_hw_sectors underflow
block: stack max_user_sectors
sd: also set max_user_sectors when setting max_sectors
null_blk: Print correct max open zones limit in null_init_zoned_dev()
block: delete redundant function declaration
null_blk: Fix return value of nullb_device_power_store()
dm: make dm_set_zones_restrictions work on the queue limits
dm: remove dm_check_zoned
dm: move setting zoned_enabled to dm_table_set_restrictions
block: remove blk_queue_max_integrity_segments
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
...
Linus Torvalds [Fri, 31 May 2024 22:22:58 +0000 (15:22 -0700)]
Merge tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"A couple of minor fixes for issues introduced in the 6.10 merge window:
- Ensure that all read/write ops have an appropriate cleanup handler
set (Breno)
- Regression for applications still doing multiple mmaps even if
FEAT_SINGLE_MMAP is set (me)
- Move kmsg inquiry setting above any potential failure point,
avoiding a spurious NONEMPTY flag setting on early error (me)"
* tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux:
io_uring/net: assign kmsg inq/flags before buffer selection
io_uring/rw: Free iovec before cleaning async data
io_uring: don't attempt to mmap larger than what the user asks for
Linus Torvalds [Fri, 31 May 2024 19:11:44 +0000 (12:11 -0700)]
Merge tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes:
- A race fix for debugfs handling in ALSA core
- A series of corrections for MIDI2 core format conversions
- ASoC Intel fixes for 16 bit DMIC config
- Updates for missing module parameters in ASoC code
- HD-audio quirk, Cirrus codec fix, etc minor fixes"
* tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
ALSA: seq: ump: Fix swapped song position pointer data
ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats
ASoC: SOF: ipc4-topology: Improve readability of sof_ipc4_prepare_dai_copier()
ASoC: SOF: ipc4-topology/pcm: Rename sof_ipc4_copier_is_single_format()
ASoC: SOF: ipc4-topology: Print out the channel count in sof_ipc4_dbg_audio_format
ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob
ALSA: seq: Fix yet another spot for system message conversion
ALSA: ump: Set default protocol when not given explicitly
ALSA: ump: Don't accept an invalid UMP protocol number
ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
ASoC: Intel: sof-sdw: fix missing SPI_MASTER dependency
ALSA: pcm: fix typo in comment
ALSA: ump: Don't clear bank selection after sending a program change
ALSA: seq: Fix incorrect UMP type for system messages
ALSA/hda: intel-dsp-config: reduce log verbosity
ALSA: seq: Don't clear bank selection at event -> UMP MIDI2 conversion
ALSA: seq: Fix missing bank setup between MIDI1/MIDI2 UMP conversion
ASoC: SOF: add missing MODULE_DESCRIPTION()
ASoC: SOF: reorder MODULE_ definitions
ASoC: SOF: AMD: group all module related information
...
Linus Torvalds [Fri, 31 May 2024 19:03:28 +0000 (12:03 -0700)]
Merge tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- a use-after-free bugfix
- Kconfig fixes for randconfig builds
- allow setting touchscreen_dmi quirks from the cmdline for debugging
- touchscreen_dmi quirks for two new laptop/tablet models
* tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline
platform/x86: thinkpad_acpi: Select INPUT_SPARSEKMAP in Kconfig
platform/x86: x86-android-tablets: Add "select LEDS_CLASS"
platform/x86: ISST: fix use-after-free in tpmi_sst_dev_remove()
Linus Torvalds [Fri, 31 May 2024 18:52:06 +0000 (11:52 -0700)]
Merge tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid pt_regs aliasing with idle thread stacks on secondary
harts.
- HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot
issues on XIP systems with huge pages.
- An update to the uABI documentation clarifying that only scalar
misaligned accesses were grandfathered in as supported, as the vector
extension did not exist at the time the uABI was frozen.
- A fix for the recently-added byte/half atomics to avoid losing the
fully ordered decorations.
* tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix fully ordered LR/SC xchg[8|16]() implementations
Documentation: RISC-V: uabi: Only scalar misaligned loads are supported
riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel
riscv: prevent pt_regs corruption for secondary idle threads
Linus Torvalds [Fri, 31 May 2024 18:45:41 +0000 (11:45 -0700)]
Merge tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Assorted odds and ends...
- two downgrade fixes
- a couple snapshot deletion and repair fixes, thanks to noradtux for
finding these and providing the image to debug them
- a couple assert fixes
- convert to folio helper, from Matthew
- some improved error messages
- bit of code reorganization (just moving things around); doing this
while things are quiet so I'm not rebasing fixes past reorgs
- don't return -EROFS on inconsistency error in recovery, this
confuses util-linux and has it retry the mount
- fix failure to return error on misaligned dio write; reported as an
issue with coreutils shred"
* tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs: (21 commits)
bcachefs: Fix failure to return error on misaligned dio write
bcachefs: Don't return -EROFS from mount on inconsistency error
bcachefs: Fix uninitialized var warning
bcachefs: Split out sb-errors_format.h
bcachefs: Split out journal_seq_blacklist_format.h
bcachefs: Split out replicas_format.h
bcachefs: Split out disk_groups_format.h
bcachefs: split out sb-downgrade_format.h
bcachefs: split out sb-members_format.h
bcachefs: Better fsck error message for key version
bcachefs: btree_gc can now handle unknown btrees
bcachefs: add missing MODULE_DESCRIPTION()
bcachefs: Fix setting of downgrade recovery passes/errors
bcachefs: Run check_key_has_snapshot in snapshot_delete_keys()
bcachefs: Refactor delete_dead_snapshots()
bcachefs: Fix locking assert
bcachefs: Fix lookup_first_inode() when inode_generations are present
bcachefs: Plumb bkey into __btree_err()
bcachefs: Use copy_folio_from_iter_atomic()
bcachefs: Fix sb-downgrade validation
...
Thomas Gleixner [Thu, 30 May 2024 15:29:18 +0000 (17:29 +0200)]
x86/topology/intel: Unlock CPUID before evaluating anything
Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.
This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.
Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.
Fixes: 22d63660c35e ("x86/cpu: Use common topology code for Intel") Reported-by: Peter Schneider <pschneider1968@googlemail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/fd3f73dc-a86f-4bcf-9c60-43556a21eb42@googlemail.com
scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
The prior strscpy() replacement of strncpy() here expected the
manufacture_reply strings to be NUL-terminated, but it is possible
they are not, as the code pattern here shows, e.g., edev->vendor_id
being exactly 1 character larger than manufacture_reply->vendor_id,
and the replaced strncpy() was copying only up to the size of the
source character array. Replace this with memtostr(), which is the
unambiguous way to convert a maybe not-NUL-terminated character array
into a NUL-terminated string.
Fixes: b7e9712a02e8 ("scsi: mpt3sas: Replace deprecated strncpy() with strscpy()") Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Marco Patalano <mpatalan@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240410023155.2100422-3-keescook@chromium.org Signed-off-by: Kees Cook <kees@kernel.org>
Mickaël Salaün [Thu, 16 May 2024 18:19:35 +0000 (20:19 +0200)]
selftests/landlock: Add layout1.refer_mount_root
Add tests to check error codes when linking or renaming a mount root
directory. This previously triggered a kernel warning, but it is fixed
with the previous commit.
Mickaël Salaün [Thu, 16 May 2024 18:19:34 +0000 (20:19 +0200)]
landlock: Fix d_parent walk
The WARN_ON_ONCE() in collect_domain_accesses() can be triggered when
trying to link a root mount point. This cannot work in practice because
this directory is mounted, but the VFS check is done after the call to
security_path_link().
Do not use source directory's d_parent when the source directory is the
mount point.
Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Cc: stable@vger.kernel.org Reported-by: syzbot+bf4903dc7e12b18ebc87@syzkaller.appspotmail.com Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER") Closes: https://lore.kernel.org/r/000000000000553d3f0618198200@google.com Link: https://lore.kernel.org/r/20240516181935.1645983-2-mic@digikod.net
[mic: Fix commit message] Signed-off-by: Mickaël Salaün <mic@digikod.net>
Niklas Cassel [Thu, 30 May 2024 21:27:04 +0000 (23:27 +0200)]
ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Apacer AS340 drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Tim Teichmann <teichmanntim@outlook.de> Closes: https://lore.kernel.org/linux-ide/87bk4pbve8.ffs@tglx/ Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Niklas Cassel [Thu, 30 May 2024 21:32:44 +0000 (23:32 +0200)]
ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that AMD Radeon S3 SSD drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support both
HIPM and DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Doru Iorgulescu <doru.iorgulescu1@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832 Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Niklas Cassel [Thu, 30 May 2024 21:28:17 +0000 (23:28 +0200)]
ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Crucial CT240BX500SSD1 drives do not handle low power
modes correctly. The problem was most likely not seen before because no
one had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Aarrayy <lp610mh@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832 Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Phil Auld [Thu, 30 May 2024 18:15:48 +0000 (14:15 -0400)]
sched/x86: Export 'percpu arch_freq_scale'
Commit:
7bc263840bc3 ("sched/topology: Consolidate and clean up access to a CPU's max compute capacity")
removed rq->cpu_capacity_orig in favor of using arch_scale_freq_capacity()
calls. Export the underlying percpu symbol on x86 so that external trace
point helper modules can be made to work again.
Jeff Johnson [Thu, 30 May 2024 20:12:03 +0000 (13:12 -0700)]
perf/x86/rapl: Add missing MODULE_DESCRIPTION() line
Fix the warning from 'make C=1 W=1':
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/events/rapl.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20240530-md-arch-x86-events-v1-1-e45ffa8af99f@quicinc.com
Takashi Iwai [Fri, 31 May 2024 07:51:07 +0000 (09:51 +0200)]
ALSA: seq: ump: Fix swapped song position pointer data
At converting between the legacy event and UMP, the parameters for
MIDI Song Position Pointer are incorrectly stored. It should have
been LSB -> MSB order while it stored in MSB -> LSB order.
This patch corrects the ordering.
Waiman Long [Thu, 30 May 2024 13:45:47 +0000 (09:45 -0400)]
blk-throttle: Fix incorrect display of io.max
Commit bf20ab538c81 ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW")
attempts to revert the code change introduced by commit cd5ab1b0fcb4
("blk-throttle: add .low interface"). However, it leaves behind the
bps_conf[] and iops_conf[] fields in the throtl_grp structure which
aren't set anywhere in the new blk-throttle.c code but are still being
used by tg_prfill_limit() to display the limits in io.max. Now io.max
always displays the following values if a block queue is used:
<m>:<n> rbps=0 wbps=0 riops=0 wiops=0
Fix this problem by removing bps_conf[] and iops_conf[] and use bps[]
and iops[] instead to complete the revert.
Dave Airlie [Thu, 30 May 2024 22:18:17 +0000 (08:18 +1000)]
Merge tag 'drm-intel-fixes-2024-05-30' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.10-rc2:
- Fix a race in audio component by registering it later
- Make DPT object unshrinkable to avoid shrinking when framebuffer has
not shrunk
- Fix CCS id calculation to fix a perf regression
- Fix selftest caching mode
- Fix FIELD_PREP compiler warnings
- Fix indefinite wait for GT wakeref release
- Revert overeager multi-gt pm reference removal
Damien Le Moal [Thu, 30 May 2024 05:40:34 +0000 (14:40 +0900)]
block: Fix zone write plugging handling of devices with a runt zone
A zoned device may have a last sequential write required zone that is
smaller than other zones. However, all tests to check if a zone write
plug write offset exceeds the zone capacity use the same capacity
value stored in the gendisk zone_capacity field. This is incorrect for a
zoned device with a last runt (smaller) zone.
Add the new field last_zone_capacity to struct gendisk to store the
capacity of the last zone of the device. blk_revalidate_seq_zone() and
blk_revalidate_conv_zone() are both modified to get this value when
disk_zone_is_last() returns true. Similarly to zone_capacity, the value
is first stored using the last_zone_capacity field of struct
blk_revalidate_zone_args. Once zone revalidation of all zones is done,
this is used to set the gendisk last_zone_capacity field.
The checks to determine if a zone is full or if a sector offset in a
zone exceeds the zone capacity in disk_should_remove_zone_wplug(),
disk_zone_wplug_abort_unaligned(), blk_zone_write_plug_init_request(),
and blk_zone_wplug_prepare_bio() are modified to use the new helper
functions disk_zone_is_full() and disk_zone_wplug_is_full().
disk_zone_is_full() uses the zone index to determine if the zone being
tested is the last one of the disk and uses the either the disk
zone_capacity or last_zone_capacity accordingly.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20240530054035.491497-4-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Thu, 30 May 2024 05:40:33 +0000 (14:40 +0900)]
block: Fix validation of zoned device with a runt zone
Commit ecfe43b11b02 ("block: Remember zone capacity when revalidating
zones") introduced checks to ensure that the capacity of the zones of
a zoned device is constant for all zones. However, this check ignores
the possibility that a zoned device has a smaller last zone with a size
not equal to the capacity of other zones. Such device correspond in
practice to an SMR drive with a smaller last zone and all zones with a
capacity equal to the zone size, leading to the last zone capacity being
different than the capacity of other zones.
Correctly handle such device by fixing the check for the constant zone
capacity in blk_revalidate_seq_zone() using the new helper function
disk_zone_is_last(). This helper function is also used in
blk_revalidate_zone_cb() when checking the zone size.
Fixes: ecfe43b11b02 ("block: Remember zone capacity when revalidating zones") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20240530054035.491497-3-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Thu, 30 May 2024 05:40:32 +0000 (14:40 +0900)]
null_blk: Do not allow runt zone with zone capacity smaller then zone size
A zoned device with a smaller last zone together with a zone capacity
smaller than the zone size does make any sense as that does not
correspond to any possible setup for a real device:
1) For ZNS and zoned UFS devices, all zones are always the same size.
2) For SMR HDDs, all zones always have the same capacity.
In other words, if we have a smaller last runt zone, then this zone
capacity should always be equal to the zone size.
Add a check in null_init_zoned_dev() to prevent a configuration to have
both a smaller zone size and a zone capacity smaller than the zone size.
which appears to be io_recv_finish() reading kmsg->msg.msg_inq to decide
if it needs to set IORING_CQE_F_SOCK_NONEMPTY or not. If the recv is
entered with buffer selection, but no buffer is available, then we jump
error path which calls io_recv_finish() without having assigned
kmsg->msg_inq. This might cause an errant setting of the NONEMPTY flag
for a request get gets errored with -ENOBUFS.
Reported-by: syzbot+b1647099e82b3b349fbf@syzkaller.appspotmail.com Fixes: 4a3223f7bfda ("io_uring/net: switch io_recv() to using io_async_msghdr") Signed-off-by: Jens Axboe <axboe@kernel.dk>
Takashi Iwai [Thu, 30 May 2024 19:26:19 +0000 (21:26 +0200)]
Merge tag 'asoc-fix-v6.10-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
Several serieses of fixes that have come in since the merge window,
mostly for Intel systems. The biggest thing is some updates from Peter
which fix support for a series of Intel laptops which have been found to
use 16 bit rather than 32 bit DMIC configuration blobs in their firmware
descriptions. We also have a bunch of fixes for module annotations, and
some smaller single patch fixes.
Abhinav Kumar [Tue, 7 May 2024 23:04:40 +0000 (16:04 -0700)]
drm/msm: remove python 3.9 dependency for compiling msm
Since commit 5acf49119630 ("drm/msm: import gen_header.py script from Mesa"),
compilation is broken on machines having python versions older than 3.9
due to dependency on argparse.BooleanOptionalAction.
Switch to use simple bool for the validate flag to remove the dependency.
Fixes: 5acf49119630 ("drm/msm: import gen_header.py script from Mesa") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240507230440.3384949-1-quic_abhinavk@quicinc.com
Palmer Dabbelt [Fri, 24 May 2024 18:56:00 +0000 (11:56 -0700)]
Documentation: RISC-V: uabi: Only scalar misaligned loads are supported
We're stuck supporting scalar misaligned loads in userspace because they
were part of the ISA at the time we froze the uABI. That wasn't the
case for vector misaligned accesses, so depending on them
unconditionally is a userspace bug. All extant vector hardware traps on
these misaligned accesses.
Nam Cao [Sun, 26 May 2024 11:01:04 +0000 (13:01 +0200)]
riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel
HAVE_ARCH_HUGE_VMAP also works on XIP kernel, so remove its dependency on
!XIP_KERNEL.
This also fixes a boot problem for XIP kernel introduced by the commit in
"Fixes:". This commit used huge page mapping for vmemmap, but huge page
vmap was not enabled for XIP kernel.
Fixes: ff172d4818ad ("riscv: Use hugepage mappings for vmemmap") Signed-off-by: Nam Cao <namcao@linutronix.de> Cc: <stable@vger.kernel.org> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240526110104.470429-1-namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Sergey Matyukevich [Thu, 23 May 2024 08:43:23 +0000 (11:43 +0300)]
riscv: prevent pt_regs corruption for secondary idle threads
Top of the kernel thread stack should be reserved for pt_regs. However
this is not the case for the idle threads of the secondary boot harts.
Their stacks overlap with their pt_regs, so both may get corrupted.
Similar issue has been fixed for the primary hart, see c7cdd96eca28
("riscv: prevent stack corruption by reserving task_pt_regs(p) early").
However that fix was not propagated to the secondary harts. The problem
has been noticed in some CPU hotplug tests with V enabled. The function
smp_callin stored several registers on stack, corrupting top of pt_regs
structure including status field. As a result, kernel attempted to save
or restore inexistent V context.
Fixes: 9a2451f18663 ("RISC-V: Avoid using per cpu array for ordered booting") Fixes: 2875fe056156 ("RISC-V: Add cpu_ops and modify default booting method") Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240523084327.2013211-1-geomatsi@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Guenter Roeck [Thu, 30 May 2024 15:20:14 +0000 (08:20 -0700)]
hwmon: (shtc1) Fix property misspelling
The property name is "sensirion,low-precision", not
"sensicon,low-precision".
Cc: Chris Ruehl <chris.ruehl@gtsys.com.hk> Fixes: be7373b60df5 ("hwmon: shtc1: add support for device tree bindings") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- netfilter: tproxy: bail out if IP has been disabled on the device
- af_unix: annotate data-race around unix_sk(sk)->addr
- eth: mlx5e: fix UDP GSO for encapsulated packets
- eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
buffers
- eth: i40e: fully suspend and resume IO operations in EEH case
- eth: octeontx2-pf: free send queue buffers incase of leaf to inner
- eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"
* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
netdev: add qstat for csum complete
ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
net: ena: Fix redundant device NUMA node override
ice: check for unregistering correct number of devlink params
ice: fix 200G PHY types to link speed mapping
i40e: Fully suspend and resume IO operations in EEH case
i40e: factoring out i40e_suspend/i40e_resume
e1000e: move force SMBUS near the end of enable_ulp function
net: dsa: microchip: fix RGMII error in KSZ DSA driver
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
net: fix __dst_negative_advice() race
nfc/nci: Add the inconsistency check between the input data length and count
MAINTAINERS: dwmac: starfive: update Maintainer
net/sched: taprio: extend minimum interval restriction to entire cycle too
net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
netfilter: nft_fib: allow from forward/input without iif selector
netfilter: tproxy: bail out if IP has been disabled on the device
netfilter: nft_payload: skbuff vlan metadata mangle support
net: ti: icssg-prueth: Fix start counter for ft1 filter
sock_map: avoid race between sock_map_close and sk_psock_put
...
Dave Hansen [Fri, 17 May 2024 20:05:34 +0000 (13:05 -0700)]
x86/cpu: Provide default cache line size if not enumerated
tl;dr: CPUs with CPUID.80000008H but without CPUID.01H:EDX[CLFSH]
will end up reporting cache_line_size()==0 and bad things happen.
Fill in a default on those to avoid the problem.
Long Story:
The kernel dies a horrible death if c->x86_cache_alignment (aka.
cache_line_size() is 0. Normally, this value is populated from
c->x86_clflush_size.
Right now the code is set up to get c->x86_clflush_size from two
places. First, modern CPUs get it from CPUID. Old CPUs that don't
have leaf 0x80000008 (or CPUID at all) just get some sane defaults
from the kernel in get_cpu_address_sizes().
The vast majority of CPUs that have leaf 0x80000008 also get
->x86_clflush_size from CPUID. But there are oddballs.
Intel Quark CPUs[1] and others[2] have leaf 0x80000008 but don't set
CPUID.01H:EDX[CLFSH], so they skip over filling in ->x86_clflush_size:
So they: land in get_cpu_address_sizes() and see that CPUID has level
0x80000008 and jump into the side of the if() that does not fill in
c->x86_clflush_size. That assigns a 0 to c->x86_cache_alignment, and
hilarity ensues in code like:
To fix this, always provide a sane value for ->x86_clflush_size.
Big thanks to Andy Shevchenko for finding and reporting this and also
providing a first pass at a fix. But his fix was only partial and only
worked on the Quark CPUs. It would not, for instance, have worked on
the QEMU config.
1. https://raw.githubusercontent.com/InstLatx64/InstLatx64/master/GenuineIntel/GenuineIntel0000590_Clanton_03_CPUID.txt
2. You can also get this behavior if you use "-cpu 486,+clzero"
in QEMU.
[ dhansen: remove 'vp_bits_from_cpuid' reference in changelog
because bpetkov brutally murdered it recently. ]
Breno Leitao [Thu, 30 May 2024 14:23:39 +0000 (07:23 -0700)]
io_uring/rw: Free iovec before cleaning async data
kmemleak shows that there is a memory leak in io_uring read operation,
where a buffer is allocated at iovec import, but never de-allocated.
The memory is allocated at io_async_rw->free_iovec, but, then
io_async_rw is kfreed, taking the allocated memory with it. I saw this
happening when the read operation fails with -11 (EAGAIN).
This occurs because the async data cleanup functions are not set for
read/write operations. As a result, the potentially allocated iovec in
the rw async data is not freed before the async data is released,
leading to a memory leak.
With this following patch, kmemleak does not show the leaked memory
anymore, and all liburing tests pass.
projects / nvme.git / log