Bruce Allan [Tue, 22 Dec 2015 21:43:49 +0000 (13:43 -0800)]
fm10k: cleanup remaining right-bit-shifted 1
Use BIT() macro instead.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit fcdb0a9951d8a5edfc47e89a7fe62457c25e18c4) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 22 Dec 2015 21:43:44 +0000 (13:43 -0800)]
fm10k: Move constants to the right of binary operators
The semantic patch that makes this change is available
in scripts/coccinelle/misc/compare_const_fl.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 1aab144c507a9849d5b4557d6d78db185ceaef37) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Wed, 9 Dec 2015 01:20:49 +0000 (17:20 -0800)]
fm10k: IS_ENABLED() is not appropriate for boolean kconfig option
Tri-states need 'if IS_ENABLED()', booleans should use 'ifdef'.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0d722ec8bf46cb6547d10e8c5d9b8b6498bc7f97) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Wed, 9 Dec 2015 01:20:44 +0000 (17:20 -0800)]
fm10k: cleanup mailbox code comments etc
Cleanup a number of issues with function header comments, lower-case
acronyms (i.e. FIFO, TLV), duplicate comments and a stubbed-out header
comment for fm10k_sm_mbx_init.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f632fed30f8e0c1b5c9de209f00145f516e7ad37) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 8 Dec 2015 23:51:11 +0000 (15:51 -0800)]
fm10k: use true/false for boolean get_host_state
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f355bb51794af64ef583c259469a778e606d95bb) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 8 Dec 2015 23:51:04 +0000 (15:51 -0800)]
fm10k: remove unused struct element
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e6f244d484793e0ce80101eb4a523ff08ad73172) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 8 Dec 2015 23:50:39 +0000 (15:50 -0800)]
fm10k: constify fm10k_mac_ops, fm10k_iov_ops and fm10k_info structures
These structures never change so declare them as const.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f329ad732b21dc86d477b47300805dd16178f9ca) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 8 Dec 2015 23:50:34 +0000 (15:50 -0800)]
fm10k: address operator not needed when declaring function pointers
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 4e458cfb226bf9a0e211895370f06838495b2e97) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 16 Nov 2015 23:33:34 +0000 (15:33 -0800)]
fm10k: use ether_addr_equal instead of memcmp
When comparing MAC addresses, use ether_addr_equal instead of memcmp to
ETH_ALEN length. Found and replaced using the following sed:
sed -e 's/memcmp\x28\(.*\), ETH_ALEN\x29/!ether_addr_equal\x28\1\x29/'
Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 6186ddf06dd270a09ca08cc3c182d4cd58cf0218) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Alexander Duyck [Tue, 10 Nov 2015 17:40:30 +0000 (09:40 -0800)]
fm10k: Cleanup exception handling for changing queues
This patch is meant to cleanup the exception handling for the paths where
we reset the interrupts and then reconfigure them. In all of these paths
we had very different levels of exception handling. I have updated the
driver so that all of the paths should result in a similar state if we
fail.
Specifically the driver will now unload the mailbox interrupt, free the
queue vectors and MSI-X, and then detach the interface.
In addition for any of the PCIe related resets I have added a check with
the hw_ready function to just make sure the registers are in a readable
state prior to reopening the interface.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 09f8a82b6abbff279f41ac2892707d3f0f32d00c) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 9 Nov 2015 22:04:08 +0000 (14:04 -0800)]
fm10k: correctly pack TLV structures and explain reasoning
The TLV format for little endian structures is actually 4 byte aligned
copy. To this end, we need to add an additional __aligned(4) marker
along with __packed to ensure that these structures are actually 4 byte
aligned and packed correctly. Use of just __packed will not work as this
will result in 1byte alignment which is incorrect. Add a comment
explaining the reasoning behind why these structures need the special
treatment.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 8c2a029c7eff14510fed04cef2848c6d21ed92dd) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 3 Nov 2015 19:35:02 +0000 (11:35 -0800)]
fm10k: don't initialize fm10k_workqueue at global level
Cleans up checkpatch GLOBAL_INITIALIZERS error
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 07146e2ea8d878d3bfb8d7d3424350d447e0166f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 29 Oct 2015 20:43:40 +0000 (13:43 -0700)]
fm10k: initialize xps at driver load
Similar to ixgbe and i40e, initialize XPS on driver load so that we can
take advantage of this kernel feature.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 504b0fdf92bfb28b88b79fe3bf356b840b2e555c) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Thu, 29 Oct 2015 00:19:56 +0000 (17:19 -0700)]
fm10k: cleanup overly long lines
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 3d02b3df733af0531789fff3fc999f9ca843b66e) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Thu, 29 Oct 2015 00:19:51 +0000 (17:19 -0700)]
fm10k: cleanup namespace pollution
Make functions that should be static. While we're at it, fix the function
header comment for fm10k_tlv_attr_nest_stop(), and update the copyright
header for fm10k_pf.h, fm10k_tlv.c and fm10k_tlv.h.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit bb269e8bb5ab5015574cf44af6233278af629bcb) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Thu, 29 Oct 2015 00:19:45 +0000 (17:19 -0700)]
fm10k: use BIT() macro instead of open-coded bit-shifting
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 3e515645b198ac60f493822f9193dd8107e1b8d0) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Thu, 29 Oct 2015 00:19:40 +0000 (17:19 -0700)]
fm10k: whitespace cleanups
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit a4fcad656e1100bdda9b0b752b93a1a276810469) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Wed, 28 Oct 2015 23:04:40 +0000 (16:04 -0700)]
fm10k: do not inline fm10k_iov_select_vid()
The function declaration does not need to be 'inline'd here.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e214d85b4a0c358c5aefa45d72bb00138fbcb6ac) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Alexander Duyck [Tue, 27 Oct 2015 23:59:18 +0000 (16:59 -0700)]
fm10k: Cleanup exception handling for mailbox interrupt
This patch addresses two issues.
First is the fact that the fm10k_mbx_free_irq was assuming msix_entries was
valid and that will not always be the case. As such we need to add a check
for if it is NULL.
Second is the fact that we weren't freeing the IRQ if the mailbox API
returned an error on trying to connect.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e00e23bceba48a8f0c94fefe26948404cbd43d0a) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Alexander Duyck [Tue, 27 Oct 2015 23:59:12 +0000 (16:59 -0700)]
fm10k: Cleanup MSI-X interrupts in case of failure
If the q_vector allocation fails we should free the resources associated
with the MSI-X vector table.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 587731e684dcf3522215194a02357d26b9bc7277) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 27 Oct 2015 19:51:09 +0000 (12:51 -0700)]
fm10k: conditionally compile DCB and DebugFS support
Rather than wrapping fm10k_dcbnl.c and fm10k_debugfs.c support with
#ifdef blocks, just conditionally include the .o files in the Makefile.
Also, since we're modifying it, update the copyright year on the
Makefile.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 5682366cecd1d40cb63f6a88dbe53349cb97e173) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 2 Nov 2015 20:10:22 +0000 (12:10 -0800)]
fm10k: consistently refer to VLANs and VLAN IDs
Instead of using lowercase vlan, vid, or VID, always use VLAN or VLAN ID
in comments when referring to VLANs. The original driver code was
consistent, but recent patches have not been as consistent with this
naming scheme.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit aa502b4a2425a269787fbe2c3a91054d5e648a64) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 26 Oct 2015 23:32:06 +0000 (16:32 -0700)]
fm10k: remove namespace pollution of fm10k_iov_msg_data_pf
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit b80b1a51a19d613751d032fe213d7802d945f300) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 26 Oct 2015 23:32:04 +0000 (16:32 -0700)]
fm10k: do not use CamelCase
Avoid the use of CamelCase for some variable names that previously
slipped through review.
Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 40423dd2a56ab95c41b69d9dd910199a0acfd5c5) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 26 Oct 2015 23:32:02 +0000 (16:32 -0700)]
fm10k: use ether_addr_copy to copy MAC address
Use the ether_addr_copy function instead of copying byte-by-byte in a
for-loop by hand.
Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f0cf5c98981353563b929801100c30071f0eeefb) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:57:09 +0000 (10:57 -0700)]
fm10k: change default Tx ITR to 25usec
The current default ITR for Tx is overly restrictive. Using a simple
netperf TCP_STREAM test, we top out at about 10Gb/s for a single thread
when running using 1500 byte frames. By reducing the ITR value to 25usec
(up to 40K interrupts a second from 10K), we are able to achieve 36Gb/s
for a single thread TCP stream test.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit dbf4284886c59a17dc0081cee39039ac2a546078) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:57:08 +0000 (10:57 -0700)]
fm10k: use macro for default Tx and Rx ITR values
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 436ea956bffd9974bc41ae9bd99930e29d9c807d) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:57:05 +0000 (10:57 -0700)]
fm10k: Add support for ITR scaling based on PCIe link speed
The Intel Ethernet Switch FM10000 Host Interface interrupt throttle
timers are based on the PCIe link speed. Because of this, the value
being programmed into the ITR registers must be scaled accordingly.
For the PF, this is as simple as reading the PCIe link speed and storing
the result. However, in the case of SR-IOV, the VF's interrupt throttle
timers are based on the link speed of the PF. However, the VF is unable
to get the link speed information from its configuration space, so the
PF must inform it of what scale to use.
Rather than pass this scale via mailbox message, take advantage of
unused bits in the TDLEN register to pass the scale. It is the
responsibility of the PF to program this for the VF while setting up the
VF queues and the responsibility of the VF to get the information
accordingly. This is preferable because it allows the VF to set up the
interrupts properly during initialization and matches how the MAC
address is passed in the TDBAL/TDBAH registers.
Since we're modifying fm10k_type.h, we may as well also update the
copyright year.
Reported-by: Matthew Vick <matthew.vick@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 20076fa18571e2e274f51a2012ff5ef5c82e93a5) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:57:03 +0000 (10:57 -0700)]
fm10k: rename mbx_tx_oversized statistic to mbx_tx_dropped
Originally this statistic was renamed because the method of dropping was
called "drop_oversized_messages", but this logic has changed much, and
this counter does actually represent messages which we failed to
transmit for a number of reasons. Rename the counter back to tx_dropped
since this is when it will increment, and it is less confusing.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 5680ea692407ce5113f3391c2e6b5dbe6eec84d8) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:57:02 +0000 (10:57 -0700)]
fm10k: add statistics for actual DWORD count of mbmem mailbox
A previous bug was uncovered by addition of a debug stat to indicate the
actual number of DWORDS we pulled from the mbmem. It turned out this was
not the same as the tx_dwords counter. While the previous bug fix should
have corrected this in all cases, add some debug stats that count the
number of DWORDs pushed or pulled from the mbmem. A future debugger may
take advantage of this statistic for debugging purposes. Since we're
modifying fm10k_mbx.h, update the copyright year as well.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 17d39fac0888bfd624f61f758c8cce60632a3394) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:57:00 +0000 (10:57 -0700)]
fm10k: Correct typecast in fm10k_update_xc_addr_pf
Since the resultant data type of the mac_update.mac_upper field is u16,
it does not make sense to typecast u8 variables to u32 first. Since
we're modifying fm10k_pf.c, also update the copyright year.
Reported-by: Matthew Vick <matthew.vick@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 9d4955b45888b1b7c9f2a954cf6aa1269904bb98) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:56:59 +0000 (10:56 -0700)]
fm10k: reinitialize queuing scheme after calling init_hw
The init_hw function may fail, and in the case of VFs, it might change
the number of maximum queues available. Thus, for every flow which
checks init_hw, we need to ensure that we clear the queue scheme before,
and initialize it after. The fm10k_io_slot_reset path will end up
triggering a reset so fm10k_reinit needs this change. The
fm10k_io_error_detected and fm10k_io_resume also need to properly clear
and reinitialize the queue scheme.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 875328e4bce696e85edcda3c4b0ec80fd525e3a3) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:56:58 +0000 (10:56 -0700)]
fm10k: always check init_hw for errors
A recent change modified init_hw in some flows the function may fail on
VF devices. For example, if a VF doesn't yet own its own queues.
However, many callers of init_hw didn't bother to check the error code.
Other callers checked but only displayed diagnostic messages without
actually handling the consequences.
Fix this by (a) always returning and preventing the netdevice from going
up, and (b) printing the diagnostic in every flow for consistency. This
should resolve an issue where VF drivers would attempt to come up
before the PF has finished assigning queues.
In addition, change the dmesg output to explicitly show the actual
function that failed, instead of combining reset_hw and init_hw into a
single check, to help for future debugging.
Fixes: 1d568b0f6424 ("fm10k: do not assume VF always has 1 queue") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 1343c65f70ee1b1f968a08b30e1836a4e37116cd) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:56:57 +0000 (10:56 -0700)]
fm10k: reset max_queues on init_hw_vf failure
VF drivers must detect how many queues are available. Previously, the
driver assumed that each VF has at minimum 1 queue. This assumption is
incorrect, since it is possible that the PF has not yet assigned the
queues to the VF by the time the VF checks. To resolve this, we added a
check first to ensure that the first queue is infact owned by the VF at
init_hw_vf time. However, the code flow did not reset hw->mac.max_queues
to 0. In some cases, such as during reinit flows, we call init_hw_vf
without clearing the previous value of hw->mac.max_queues. Due to this,
when init_hw_vf errors out, if its error code is not properly handled
the VF driver may still believe it has queues which no longer belong to
it. Fix this by clearing the hw->mac.max_queues on exit due to errors.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0e8d5b5975401c83641efd5d4595e6cdbe9e9e2f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:56:56 +0000 (10:56 -0700)]
fm10k: set netdev features in one location
Don't change netdev hw_features later in fm10k_probe, instead set all
values inside fm10k_alloc_netdev. To do so, we need to know the MAC type
(whether it is PF or VF) in order to determine what to do. This helps
ensure that all logic regarding features is co-located.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e0244903d4a6a27f9f1e8b46b89afa4130aa9164) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 25 Aug 2015 20:49:11 +0000 (13:49 -0700)]
fm10k: Correct MTU for jumbo frames
Based on hardware testing, the host interface supports up to 15368 bytes
as the maximum frame size. To determine the correct MTU, we subtract 8
for the internal switch tag, 14 for the L2 header, and 4 for the
appended FCS header, resulting in 15342 bytes of payload for our maximum
MTU on jumbo frames.
Signed-off-by: Matthew Vick <matthew.vick@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 8c7ee6d2cacc7794a91875ef5fd8284b4a900d8c) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 25 Aug 2015 00:27:24 +0000 (17:27 -0700)]
fm10k: do not assume VF always has 1 queue
It is possible that the PF has not yet assigned resources to the VF.
Although rare, this could result in the VF attempting to read queues it
does not own and result in FUM or THI faults in the PF. To prevent this,
check queue 0 before we continue in init_hw_vf.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 1340181fe435ccb8ca2f996b8680bd9566860619) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
stephen hemminger [Tue, 17 Nov 2015 22:24:27 +0000 (14:24 -0800)]
fm10k: fix memory leak
This was detected by Coverity.
The function skb_cow_head leaves skb alone on failure, so caller needs
to free.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 25394529
(cherry picked from commit 6f97532ef05e49f1998a09f8359b83d00a7b3229) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 25 Aug 2015 00:01:58 +0000 (17:01 -0700)]
fm10k: use snprintf() instead of sprintf() to avoid buffer overflow
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f6f19f8bb9afcd0e9970fe51b5affa3063af4499) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 26 Jun 2015 15:54:06 +0000 (08:54 -0700)]
fm10k: create "correct" header for the remote end on connect
When we connect to the mailbox, we insert a fake disconnect header so
that the code does not see an invalid header and thus instantly error
every time we bring up the mailbox. However, we incorrectly record the
tail and head from the local perspective. Since the remote end shouldn't
have anything for us, add a "create_fake_disconnect_hdr" function which
inverts the TAIL and HEAD fields. This enables us to connect without any
errors of either TAIL or HEAD incorrectness, and prevents creating
extraneous error messages. This is necessary now since mbx_reset_work
does not actually reset the Tx FIFO head and tail pointers, thus head
and tail might not be equivalent on a reconnect.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit afadfd224f53106e4fd52f3b6885a93431a5a6f5) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 25 Jun 2015 21:43:43 +0000 (14:43 -0700)]
fm10k: drop transmitted messages in Tx FIFO as part of reset_work
This patch fixes a corner case issue with the PF/VF mailbox code.
Currently, fm10k_mbx_reset_work clears various state about the mailbox.
However, it does not clear the Tx FIFO head/tail pointers. We can't
simply clear these pointers as we unintentionally drop untransmitted
messages without error.
Doing nothing results in a possible phantom re-transmission of messages,
since we leave tx.head and tx.tail intact, but clear the tx_pulled and
tail_len values. This means that the PF could continuously re-send a
message which triggers a reset in the VF. Upon reset, the VF will
re-receive the same message after a reconnect.
If we reset the tx.head and tx.tail pointers completely, we end up
dropping some messages that were pending before connect. This results in
missing LPORT_MSG_READY bits, and VFs will end up reporting no link.
However, we can resolve both issues by simply incrementing head to
account for the already transmitted messages, before we reset tx_pulled.
We do this via the same logic as fm10k_mbx_head_pull.
We account for the tail_len which includes all data not yet transmitted,
once we account for the acked data which means re-reading the HEAD
variable from the message header. Then, we drop messages until we've
dropped more than the new tx_pulled value. At this point, resetting
tail_len and tx_pulled, but not tx.head and tx.tail will result in
prevention of the phantom message. It also prevents us from dropping
untransmitted messages upon attempting to Tx into a connect or
disconnect header.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 4b09728e9d34170c375f41d9b454f067ce39591f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 15 Jun 2015 22:00:52 +0000 (15:00 -0700)]
fm10k: remove comment about rtnl_lock around mbx operations
This comment is no longer true due to a couple of mailbox locking
refactors, and we now don't actually do any rtnl protected operations
directly in the mailbox path. Remove this comment as it is factually
incorrect and confusing.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 8427672abdc9e405f86755fad5a035511a5b1534) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 24 Jun 2015 20:34:50 +0000 (13:34 -0700)]
fm10k: fix iov_msg_mac_vlan_pf VID checks
The VF will send a message to request multicast addresses with the
default VID. In the current code, if the PF has statically assigned a
VLAN to a VF, then the VF will not get the multicast addresses. Fix up
all of the various VLAN messages to use identical checks (since each
check was different). Also use set as a variable, so that it simplifies
our check for whether VLAN matches the pf_vid.
The new logic will allow set of a VLAN if it is zero, automatically
converting to the default VID. Otherwise it will allow setting the PF
VID, or any VLAN if PF has not statically assigned a VLAN. This is
consistent behavior, and allows VF to request either 0 or the
default_vid without silently failing.
Note that we need the check for zero since VFs might not get the default
VID message in time to actually request non-zero VLANs.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 9adbac599a71bc25a2617850ffcaa4388dc5c20d) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Alexander Duyck [Wed, 24 Jun 2015 20:34:49 +0000 (13:34 -0700)]
fm10k: Only trigger data path reset if fabric is up
This change makes it so that we only trigger the data path reset if the
fabric is ready to handle traffic. The general idea is to avoid
triggering the reset unless the switch API is ready for us. Otherwise
we can just postpone the reset until we receive a switch ready
notification.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit ac98100359e098d03dbd98783ca4becaf2ea7ec3) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 24 Jun 2015 20:34:48 +0000 (13:34 -0700)]
fm10k: re-enable VF after a full reset on detection of a Malicious event
Modify behavior of Malicious Driver Detection events. Presently, the
hardware disables the VF queues and re-assigns them to the PF. This
causes the VF in question to continuously Tx hang, because it assumes
that it can transmit over the queues in question. For transient events,
this results in continuous logging of malicious events.
New behavior is to reset the LPORT and VF state, so that the VF will
have to reset and re-enable itself. This does mean that malicious VFs
will possibly be able to continue and attempt malicious events again.
However, it is expected that system administrators will step in and
manually remove or disable the VF in question.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 95f4f8da644256d8c0ff5bab2c93ba33d2a42cd8) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 24 Jun 2015 20:34:47 +0000 (13:34 -0700)]
fm10k: TRIVIAL fix typo in fm10k_netdev.c
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 5c2d642fd0cf0f4f7396dfd3754bc03f6e50e359) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 24 Jun 2015 20:34:44 +0000 (13:34 -0700)]
fm10k: TRIVIAL fix up ordering of __always_unused and style
Fix some style issues in debugfs code, and correct ordering of void and
__always_unused. Technically, the order does not matter, but preferred
style is to put the macro between the type and name.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 6fbc6b358b3f63e701d15e9d330a3b0dbb03f802) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 19 Jun 2015 17:56:10 +0000 (10:56 -0700)]
fm10k: don't store sw_vid at reset
If we store the sw_vid at reset of PF, then we accidentally prevent the
VF from receiving the message to update its default VID. This only
occurs if the VF is created before the PF has come up, which is the
standard way of creating VFs when using the module parameter.
This fixes an issue where we request the incorrect MAC/VLAN
combinations, and prevents us from accidentally reporting some frames as
VLAN tagged.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit b655a5c735867c1a80e7ceaa1f1c45d1dd34909f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Alexander Duyck [Fri, 19 Jun 2015 02:41:10 +0000 (19:41 -0700)]
fm10k: Report MAC address on driver load
This change adds the MAC address to the list of values recorded on driver
load. The MAC address represents the serial number of the unit and allows
us to track the value should a card be replaced in a system.
The log message should now be similar in output to that of ixgbe.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0ff36676a3778d0655933ace201fca7c11b4e8b5) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 15 Jun 2015 22:00:56 +0000 (15:00 -0700)]
fm10k: update netdev perm_addr during reinit, instead of at up
Update the netdev permanent address during fm10k_reinit enables the user
to immediately see the new MAC address on the VF even if the device
isn't up. The previous code required that the device by opened before
changes would appear.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit bdc7f5902d22e7297b8f0d7a8d6ed8429cdba636) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 15 Jun 2015 22:00:55 +0000 (15:00 -0700)]
fm10k: update fm10k_slot_warn to use pcie_get_minimum link
This is useful in cases where we connect to a slot at Gen3, but the slot
is behind a bus which only connected at Gen2. This generally only
happens when a PCIe switch is in the sequence of devices, and can be
very confusing when you see slow performance with no obvious cause.
I am aware this patch has a few lines that break 80 characters, but
there does not seem to be a readable way to format them to less than 80
characters. Suggestions welcome.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 106c07a49506359f7663770ef33f4997d68316c1) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 15 Jun 2015 22:00:51 +0000 (15:00 -0700)]
fm10k: disable service task during suspend
The service task reads some registers as part of its normal routine,
even while the interface is down. Normally this is ok. However, during
suspend we have disabled the PCI device. Due to this, registers will
read in the same way as a surprise-remove event. Disable the service
task while we suspend, and re-enable it after we resume. If we don't do
this, the device could be UP when you suspend and come back from resume
as closed (since fm10k closes the device when it gets a surprise
remove).
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e40296628bec7400f529927eef4bc87cb425a22a) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 3 Jun 2015 23:31:12 +0000 (16:31 -0700)]
fm10k: fix iov_msg_lport_state_pf issue
When a VF issues an LPORT_STATE request to enable a port that is already
enabled, the PF will first disable the VF LPORT. Then it should
re-enable the VF again with the new requested settings. This ensures
that any switch rules are cleared by deleting the LPORT on the switch.
However, the flow is bugged because we actually check if the VF is
enabled at the end, and thus don't re-enable it. Fix the flow so that we
actually clear the enabled flags as part of our removal of the LPORT.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit ee4373e7d74696821e47faf1b70f779697ddf77b) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 3 Jun 2015 23:31:11 +0000 (16:31 -0700)]
fm10k: remove err_no reference in fm10k_mbx.c
The reference to err_no was left around after a previous code refactor.
We never use the value, and it doesn't seem to be used in side a hidden
macro reference. Discovered via cppcheck.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit d18c438884137609bf838a703972126862db97f4) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 3 Jun 2015 23:31:10 +0000 (16:31 -0700)]
fm10k: fix incorrect DIR_NEVATIVE bit in 1588 code
The SYSTIME_CFG.Adjust Direction bit is actually supposed to indicate
that the adjustment is positive. Fix the code to align correctly with
hardware and documentation.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 646725a7c9cbdefd8df4ae7b3217a992ad64a4cd) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 3 Jun 2015 23:31:09 +0000 (16:31 -0700)]
fm10k: pack TLV overlay structures
This patch adds the __attribute__((packed)) indicator to some structures
which are overlayed onto a TLV message. These structures must be packed
as small as possible in order to correctly align when copied into the
mailbox buffer. Without doing so, the receiving mailbox code incorrectly
parses the values and we get invalid message responses from the switch
manager software.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 7fef39322ce7a0c1bbb5b48bef61b6c1aef73b96) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 3 Jun 2015 23:31:08 +0000 (16:31 -0700)]
fm10k: re-map all possible VF queues after a VFLR
During initialization, the VF counts its rings by walking the TQDLOC
registers. This works only if the TQMAP/RQMAP registers are set to map
all of the out-of-bound rings back to the first one. This allows the VF
to cleanly detect when it has run out of queues. Update the PF code so
that it resets the empty TQMAP/RQMAP registers post-VFLR to prevent
innocent VF drivers from triggering malicious driver events.
Signed-off-by: Matthew Vick <matthew.vick@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit fba341d5cab38db68eed061cf20e161d967795c6) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 3 Jun 2015 23:31:07 +0000 (16:31 -0700)]
fm10k: force LPORT delete when updating VLAN or MAC address
Currently, we don't notify the switch at all when the PF
administratively sets a new VLAN or MAC address. This causes the old
addresses to remain valid on the switch table. Since the PF is
overriding any configuration done directly by the VF, we choose to
simply re-create the LPORT for the VF. This does mean that all rules for
the VF will be dropped when we set something directly via the PF, but it
prevents some weird issues where the MAC/VLAN table retains some stale
configuration.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit a38488f54004330071f4ec90c3cf52dc7646468e) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 16 Jun 2015 20:41:43 +0000 (13:41 -0700)]
fm10k: use dma_set_mask_and_coherent in fm10k_probe
This patch cleans up the use of dma_get_required_mask and uses the
simpler dma_set_mask_and_coherent function instead of doing these as
separate steps.
I removed the dma_get_required_mask call because based on some minimal
testing it appears that either (a) we're not doing the right thing with
the call or (b) we don't need it anyways. If the value returned is
<48bits, we'll end up trying with 48 bits anyways. If it's over 48bits,
fm10k can't support that anyways, and we should try 48bits. If 48bits
fails, we'll fallback to 32bits. This cleans up some very funky code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit c04ae58e2b6d836325914e7b4aa25f43da1be3df) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 16 Jun 2015 20:40:32 +0000 (13:40 -0700)]
fm10k: trivial fixup message style to include a colon
Also use %d for error values, since printing in hexadecimal is probably
not helpful.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0197cde62a0a39fdee606557b8cef6573a83e866) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 3 Jun 2015 23:31:04 +0000 (16:31 -0700)]
fm10k: remove extraneous NULL check on l2_accel
l2_accel was checked for NULL at the top of fm10k_dfwd_del_station, and
we return if it is not defined. Due to this, we already know it can't be
null here so a separate check is meaningless. Discovered via cppcheck.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f1f3322eb411ce875b8b9e2de59ee8d55fb3a33b) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 3 Jun 2015 23:31:02 +0000 (16:31 -0700)]
fm10k: add call to fm10k_clean_all_rx_rings in fm10k_down
This prevents a memory leak in fm10k_set_ringparams. The leak occurs
because we go down, change ring parameters, and then come up. However,
fm10k_down on its own is not clearing the Rx rings. Since fm10k_up
assumes the rings are clean we basically drop the buffers and leak a
bunch of memory. Eventually we hit dirty page faults and reboot the
system. This issue does not occur elsewhere because other flows that
involve fm10k_down go through fm10k_close which immediately called
fm10k_free_all_rx_resources which properly cleans the rings.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit ec6acb801e7b2908c24a60c8aabf47c3e40508a4) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 3 Jun 2015 23:31:01 +0000 (16:31 -0700)]
fm10k: fix incorrect free on skb in ts_tx_enqueue
This patch resolves a bug in the ts_tx_enqueue code responsible for a
NULL pointer dereference and invalid access of the skb list. We
incorrectly freed the actual skb we found instead of our copy. Thus the
skb queue is essentially invalidated. Resolve this by freeing our clone
in the cases where we did not add it to the queue. This also avoids the
skb memory leak caused by failure to free the clone.
Jacob Keller [Wed, 3 Jun 2015 23:30:59 +0000 (16:30 -0700)]
fm10k: use correct ethernet driver Tx timestamp function
skb_complete_tx_timestamp is intended for use by PHY drivers which
implement a different method of returning timestamps. This method is
intended to be used after a PHY driver accepts a cloned packet via its
phy_driver.txtstamp function. It is not correct to use in the standard
ethernet driver such as fm10k. This patch fixes the following possible
kernel panic.
Jacob Keller [Wed, 3 Jun 2015 23:30:58 +0000 (16:30 -0700)]
fm10k: ignore invalid multicast address entries
This change fixes an issue with adding an invalid multicast address
using the iproute2 tool (ip maddr add <MADDR> dev <dev>). The iproute2
tool and the kernel do not validate or filter the multicast addresses
when adding them to the multicast list. Thus, when synchronizing this
list with an invalid entry, the action will be aborted with an error
since the fm10k driver currently validates the list. Consequently,
multicast entries beyond the invalid one will not be processed and
communicated with the switch via the mailbox. This change makes it so
that invalid addresses will simply be skipped and allows synchronizing
the full list to proceed.
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 745136a8b72d638f3ee53a2b6a63f11c64a59937) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Alexander Duyck [Thu, 23 Apr 2015 04:49:25 +0000 (21:49 -0700)]
fm10k: fold fm10k_pull_tail into fm10k_add_rx_frag
This change folds the fm10k_pull_tail call into fm10k_add_rx_frag. The
advantage to doing this is that the fragment doesn't have to be modified
after it is added to the skb.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 1a8782e59ff9bb0ed4b75d6a346a2ed212bd2031) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 26 Oct 2015 21:38:40 +0000 (14:38 -0700)]
fm10k: bump driver version
We haven't bumped the driver version in a while despite many fixes being
pulled in from the out-of-tree Sourceforge driver. Update the version to
match.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e3b6e95d070cbca5e82279fea99e2dba8e38f960) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:57:07 +0000 (10:57 -0700)]
fm10k: Update adaptive ITR algorithm
The existing adaptive ITR algorithm is overly restrictive. It throttles
incorrectly for various traffic rates, and does not produce good
performance. The algorithm now allows for more interrupts per second,
and does some calculation to help improve for smaller packet loads. In
addition, take into account the new itr_scale from the hardware which
indicates how much to scale due to PCIe link speed.
Reported-by: Matthew Vick <matthew.vick@intel.com> Reported-by: Alex Duyck <alexander.duyck@gmail.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
Jacob Keller [Fri, 16 Oct 2015 17:57:06 +0000 (10:57 -0700)]
fm10k: introduce ITR_IS_ADAPTIVE macro
Define a macro for identifying when the itr value is dynamic or
adaptive. The concept was taken from i40e. This helps make clear what
the check is, and reduces the line length to something more reasonable
in a few places.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
Alexander Duyck [Tue, 22 Sep 2015 21:35:35 +0000 (14:35 -0700)]
fm10k: Fix handling of NAPI budget when multiple queues are enabled per vector
This patch corrects an issue in which the polling routine would increase
the budget for Rx to at least 1 per queue if multiple queues were present.
This would result in Rx packets being processed when the budget was 0 which
is meant to indicate that no Rx can be handled.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
Jack Vogel [Wed, 25 Jan 2017 21:51:40 +0000 (13:51 -0800)]
drivers/net/intel: use napi_complete_done()
As per Eric Dumazet's previous patches:
(see commit (24d2e4a50737) - tg3: use napi_complete_done())
Quoting verbatim:
Using napi_complete_done() instead of napi_complete() allows
us to use /sys/class/net/ethX/gro_flush_timeout
GRO layer can aggregate more packets if the flush is delayed a bit,
without having to set too big coalescing parameters that impact
latencies.
</end quote>
Tested
configuration: low latency via ethtool -C ethx adaptive-rx off
rx-usecs 10 adaptive-tx off tx-usecs 15
workload: streaming rx using netperf TCP_MAERTS
igb:
MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo
...
Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589
Alignment Offset Bytes Bytes Recvs Bytes Sends
Local Remote Local Remote Xfered Per Per
Recv Send Recv Send Recv (avg) Send (avg)
8 8 0 0 1176930056 1475.36 797726 16384.00 71905
MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo
...
Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763
Alignment Offset Bytes Bytes Recvs Bytes Sends
Local Remote Local Remote Xfered Per Per
Recv Send Recv Send Recv (avg) Send (avg)
8 8 0 0 1175182320 50476.00 23282 16384.00 71816
i40e:
Hard to test because the traffic is incoming so fast (24Gb/s) that GRO
always receives 87kB, even at the highest interrupt rate.
Other drivers were only compile tested.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
Jacob Keller [Tue, 25 Aug 2015 00:02:00 +0000 (17:02 -0700)]
fm10k: do not use enum as boolean
Check for actual value NETREG_UNINITIALIZED in case it ever changes from
the current value of zero.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
Jacob Keller [Thu, 2 Jul 2015 00:38:36 +0000 (17:38 -0700)]
fm10k: add support for extra debug statistics
Add a private ethtool flag to enable display of these statistics, which
are generally less useful. However, sometimes it can be useful for
debugging purposes. The most useful portion is the ability to see what
the PF thinks the VF mailboxes look like.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
Jacob Keller [Wed, 24 Jun 2015 20:34:46 +0000 (13:34 -0700)]
fm10k: send traffic on default VID to VLAN device if we have one
This patch ensures that VLAN traffic on the default VID will go to the
corresponding VLAN device if it exists. To do this, mask the rx_ring VID
if we have an active VLAN on that VID.
For this to work correctly, we need to update fm10k_process_skb_fields
to correctly mask off the VLAN_PRIO_MASK bits and compare them
separately, otherwise we incorrectly compare the priority bits with the
cleared flag. This also happens to fix a related bug where having
priority bits set causes us to incorrectly classify traffic.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
Alexander Duyck [Tue, 16 Jun 2015 18:47:12 +0000 (11:47 -0700)]
fm10k: Don't assume page fragments are page size
This change pulls out the optimization that assumed that all fragments
would be limited to page size. That hasn't been the case for some time now
and to assume this is incorrect as the TCP allocator can provide up to a
32K page fragment.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
Add the necessary changes to do_machine_check() to be able to
process MCEs signaled as local MCEs. Typically, only recoverable
errors (SRAR type) will be Signaled as LMCE. The architecture
does not restrict to only those errors, however.
When errors are signaled as LMCE, there is no need for the MCE
handler to perform rendezvous with other logical processors
unlike earlier processors that would broadcast machine check
errors.
Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1433436928-31903-17-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 243d657eaf540db882f73497060da5a4f7d86a90) Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Reviewed-by: Jack Vogel <jack.vogel@oracle.com>
Add required definitions to support Local Machine Check
Exceptions.
Historically, machine check exceptions on Intel x86 processors
have been broadcast to all logical processors in the system.
Upcoming CPUs will support an opt-in mechanism to request some
machine check exceptions be delivered to a single logical
processor experiencing the fault.
See http://www.intel.com/sdm Volume 3, System Programming Guide,
chapter 15 for more information on MSRs and documentation on
Local MCE.
Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1433436928-31903-15-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit bc12edb8739be10fae9f86691a3708d36d00b4f8) Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Reviewed-by: Jack Vogel <jack.vogel@oracle.com>
When L2 exits to L0 due to "exception or NMI", software exceptions
(#BP and #OF) for which L1 has requested an intercept should be
handled by L1 rather than L0. Previously, only hardware exceptions
were forwarded to L1.
Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 3f618a0b872fea38c7d1d1f79eda40f88c6466c2) Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
rfc4106(gcm(aes)) uses ctr(aes) to generate hash key. ctr(aes) needs
chainiv, but the chainiv gets initialized after aesni_intel when both
are statically linked so the setkey fails.
This patch forces aesni_intel to be initialized after chainiv.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 0fbafd06bdde938884f7326548d3df812b267c3c) Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
When the user explicitly states that they don't care whether the
algorithm has been tested (type = CRYPTO_ALG_TESTED and mask = 0),
there is a corner case where we may erroneously return ENOENT.
This patch fixes it by correcting the logic in the test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 26739535206e819946b0740347c09c94c4e48ba9) Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
Some ciphers actually support encrypting zero length plaintexts. For
example, many AEAD modes support this. The resulting ciphertext for
those winds up being only the authentication tag, which is a result of
the key, the iv, the additional data, and the fact that the plaintext
had zero length. The blkcipher constructors won't copy the IV to the
right place, however, when using a zero length input, resulting in
some significant problems when ciphers call their initialization
routines, only to find that the ->iv parameter is uninitialized. One
such example of this would be using chacha20poly1305 with a zero length
input, which then calls chacha20, which calls the key setup routine,
which eventually OOPSes due to the uninitialized ->iv member.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 70d906bc17500edfa9bdd8c8b7e59618c7911613) Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
The cipher block size for GCM is 16 bytes, and thus the CTR transform
used in crypto_gcm_setkey() will also expect a 16-byte IV. However,
the code currently reserves only 8 bytes for the IV, causing
an out-of-bounds access in the CTR transform. This patch fixes
the issue by setting the size of the IV buffer to 16 bytes.
Fixes: 84c911523020 ("[CRYPTO] gcm: Add support for async ciphers") Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 50d2e6dc1f83db0563c7d6603967bf9585ce934b) Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
The function crypto_ahash_extsize did not include padding when
computing the tfm context size. This patch fixes this by using
the generic crypto_alg_extsize helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 2495cf25f60e085b35beb9b215235dfe1ca4f200) Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
The function ablkcipher_done_slow is pretty much identical to
scatterwalk_copychunks except that it doesn't actually copy as
the processing hasn't been completed yet.
This patch allows scatterwalk_copychunks to be used in this case
by specifying out == 2.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 85eccddee401ae81067e763516889780b5545160) Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
On architectures where flush_dcache_page is not needed, we will
end up generating all the code up to the PageSlab call. This is
because PageSlab operates on a volatile pointer and thus cannot
be optimised away.
This patch works around this by checking whether flush_dcache_page
is needed before we call PageSlab which then allows PageSlab to be
compiled awy.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 160544075f2a4028209721723a51f16add7b08b9) Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
This patch adds a check for in scatterwalk_map_and_copy to avoid
copying from the same address to the same address. This is going
to be used for IV copying in AEAD IV generators.
There is no provision for partial overlaps.
This patch also uses the new scatterwalk_ffwd instead of doing
it by hand in scatterwalk_map_and_copy.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 74412fd5d71b6eda0beb302aa467da000f0d530c) Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
When creation of a macsec device fails because an identical device
already exists on this link, the current code decrements the refcnt on
the parent link (in ->destructor for the macsec device), but it had not
been incremented yet.
Move the dev_hold(parent_link) call earlier during macsec device
creation.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 0759e552bce7257db542e203a01a9ef8843c751e) Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
projects / users / jedix / linux-maple.git / log