Dave Airlie [Thu, 28 Nov 2019 02:39:50 +0000 (12:39 +1000)]
Merge branch 'vmwgfx-coherent' of git://people.freedesktop.org/~thomash/linux into drm-next
Graphics APIs like OpenGL 4.4 and Vulkan require the graphics driver
to provide coherent graphics memory, meaning that the GPU sees any
content written to the coherent memory on the next GPU operation that
touches that memory, and the CPU sees any content written by the GPU
to that memory immediately after any fence object trailing the GPU
operation is signaled.
Paravirtual drivers that otherwise require explicit synchronization
needs to do this by hooking up dirty tracking to pagefault handlers
and buffer object validation.
Provide mm helpers needed for this and that also allow for huge pmd-
and pud entries (patch 1-3), and the associated vmwgfx code (patch 4-7).
The code has been tested and exercised by a tailored version of mesa
where we disable all explicit synchronization and assume graphics memory
is coherent. The performance loss varies of course; a typical number is
around 5%.
Dave Airlie [Mon, 25 Nov 2019 22:40:23 +0000 (08:40 +1000)]
Merge tag 'drm-next-5.5-2019-11-22' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.5-2019-11-22:
amdgpu:
- Fix bad DMA on some PPC platforms
- MMHUB fix for powergating
- BACO fix for Navi
- Misc raven fixes
- Enable vbios fetch directly from rom on navi
- debugfs fix for DC
- SR-IOV fixes for arcturus
- Misc power fixes
changzhu [Tue, 19 Nov 2019 03:13:29 +0000 (11:13 +0800)]
drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10
It may lose gpuvm invalidate acknowldege state across power-gating off
cycle. To avoid this issue in gmc9/gmc10 invalidation, add semaphore acquire
before invalidation and semaphore release after invalidation.
After adding semaphore acquire before invalidation, the semaphore
register become read-only if another process try to acquire semaphore.
Then it will not be able to release this semaphore. Then it may cause
deadlock problem. If this deadlock problem happens, it needs a semaphore
firmware fix.
changzhu [Tue, 19 Nov 2019 02:18:39 +0000 (10:18 +0800)]
drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub
SW must acquire/release one of the vm_invalidate_eng*_sem around the
invalidation req/ack. Through this way,it can avoid losing invalidate
acknowledge state across power-gating off cycle.
To use vm_invalidate_eng*_sem, it needs to initialize
vm_invalidate_eng*_sem firstly.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Jack Zhang [Thu, 21 Nov 2019 06:09:08 +0000 (14:09 +0800)]
drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF.
After rlcg fw 2.1, kmd driver starts to load extra fw for
LIST_CNTL,GPM_MEM,SRM_MEM. We needs to skip the three fw
because all rlcg related fw have been loaded by host driver.
Guest driver would load the three fw fail without this change.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Zhang [Thu, 21 Nov 2019 05:59:28 +0000 (13:59 +0800)]
drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF
Temporarily skip ras,dtm,hdcp initialize and terminate for arcturus VF
Currently the three features haven't been enabled at SRIOV, it would
trigger guest driver load fail with the bare-metal path of the three
features.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stephen Rothwell [Thu, 21 Nov 2019 03:54:03 +0000 (14:54 +1100)]
merge fix for "ftrace: Rework event_create_dir()"
Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Wed, 20 Nov 2019 16:32:46 +0000 (16:32 +0000)]
drm/amdgpu: Update Arcturus golden registers
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
S/G display is not stable with the IOMMU enabled on some
platforms.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205523 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 15 Nov 2019 15:21:23 +0000 (10:21 -0500)]
drm/amdgpu: disable gfxoff on original raven
There are still combinations of sbios and firmware that
are not stable.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204689 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 13 Nov 2019 16:08:35 +0000 (11:08 -0500)]
drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2)
So that the setting reflects what the hw supports. This will
be used in a subsequent patch so needs to be correct.
v2: squash in fix from Colin Ian King
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sam Bobroff [Sun, 17 Nov 2019 23:53:54 +0000 (10:53 +1100)]
drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2
The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address. This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).
Instead, use the DMA address of the dummy page because it will always
be safe.
Fixes: 27ae10641e9c ("drm/amdgpu: add interupt handler implementation for si v3") Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sam Bobroff [Sun, 17 Nov 2019 23:53:53 +0000 (10:53 +1100)]
drm/radeon: fix bad DMA from INTERRUPT_CNTL2
The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address. This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).
Instead, use the DMA address of the dummy page because it will always
be safe.
Fixes: d8f60cfc9345 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)") Fixes: 25a857fbe973 ("drm/radeon/kms: add support for interrupts on SI") Fixes: a59781bbe528 ("drm/radeon: add support for interrupts on CIK (v5)") Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Thu, 31 Oct 2019 20:09:01 +0000 (16:09 -0400)]
drm/amd/display: Fix debugfs on MST connectors
[why]
Previous patch allowed to initialize debugfs entries on both MST
and SST connectors, but MST connectors get registered much later
which exposed an issue of debugfs entries being initialized in the
same folder.
[how]
Return SST debugfs entries' initialization back to where it was.
For MST connectors we should initialize debugfs entries in connector
register function after the connector is registered.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yintian Tao [Mon, 18 Nov 2019 08:06:00 +0000 (16:06 +0800)]
drm/amdgpu: put flush_delayed_work at first
There is one regression from 042f3d7b745cd76aa
To put flush_delayed_work after adev->shutdown = true
which will make amdgpu_ih_process not response the irq
At last, all ib ring tests will be failed just like below
[drm] amdgpu: finishing device.
[drm] Fence fallback timer expired on ring gfx
[drm] Fence fallback timer expired on ring comp_1.0.0
[drm] Fence fallback timer expired on ring comp_1.1.0
[drm] Fence fallback timer expired on ring comp_1.2.0
[drm] Fence fallback timer expired on ring comp_1.3.0
[drm] Fence fallback timer expired on ring comp_1.0.1
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.1.1 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.2.1 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.3.1 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on sdma0 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on sdma1 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on uvd_enc_0.0 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vce0 (-110).
[drm:amdgpu_device_delayed_init_work_handler [amdgpu]] *ERROR* ib ring test failed (-110).
v2: replace cancel_delayed_work_sync() with flush_delayed_work()
Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 14 Nov 2019 08:58:31 +0000 (16:58 +0800)]
drm/amd/powerplay: correct fine grained dpm force level setting
For fine grained dpm, there is only two levels supported. However
to reflect correctly the current clock frequency, there is an
intermediate level faked. Thus on forcing level setting, we
need to treat level 2 correctly as level 1.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 14 Nov 2019 07:30:39 +0000 (15:30 +0800)]
drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICs
Otherwise, the error message prompted will confuse user.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Nov 2019 09:15:02 +0000 (17:15 +0800)]
drm/amd/powerplay: avoid DPM reenable process on Navi1x ASICs V2
Otherwise, without RLC reinitialization, the DPM reenablement
will fail. That affects the custom pptable uploading.
V2: setting/clearing uploading_custom_pp_table in
smu_sys_set_pp_table()
Reported-by: Matt Coffin <mcoffin13@gmail.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Matt Coffin <mcoffin13@gmail.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Wilson [Thu, 21 Nov 2019 07:10:40 +0000 (07:10 +0000)]
Revert "drm/i915/gt: Wait for new requests in intel_gt_retire_requests()"
From inside an active timeline in the execbuf ioctl, we may try to
reclaim some space in the GGTT. We need GGTT space for all objects on
!full-ppgtt platforms, and for context images everywhere. However, to
free up space in the GGTT we may need to remove some pinned objects
(e.g. context images) that require flushing the idle barriers to remove.
For this we use the big hammer of intel_gt_wait_for_idle()
However, commit 7936a22dd466 ("drm/i915/gt: Wait for new requests in
intel_gt_retire_requests()") will continue spinning on the wait if a
timeline is active but lacks requests, as is the case during execbuf
reservation. Spinning forever is quite time consuming, so revert that
commit and start again.
In practice, the effect commit 7936a22dd466 was trying to achieve is
accomplished by commit 1683d24c1470 ("drm/i915/gt: Move new timelines
to the end of active_list"), so there is no immediate rush to replace
the looping.
Testcase: igt/gem_exec_reloc/basic-range Fixes: a46bfdc83fee ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()")
References: 1683d24c1470 ("drm/i915/gt: Move new timelines to the end of active_list") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-1-chris@chris-wilson.co.uk
(cherry picked from commit 689122dcc36e08f53732adf7ae0246f62eff3eb6)
[Joonas: Corrected Fixes: tag ref to match drm-intel-next-fixes] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Dave Airlie [Wed, 20 Nov 2019 23:17:02 +0000 (09:17 +1000)]
Merge tag 'drm-intel-next-fixes-2019-11-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Includes gvt-next-fixes-2019-11-12
- Fix Bugzilla #112051: Fix detection for a CMP-V PCH
- Fix Bugzilla #112256: Corrupted page table at address on plymouth splash
- Fix Bugzilla #111594: Avoid losing RC6 when HuC authentication is used
- Fix for OA/perf metric coherency, restore GT coarse power gating workaround
- Avoid atomic context on error capture
- Avoid MST bitmask overflowing to EDP/DPI input select
- Fixes to CI found dmesg splats
Dave Airlie [Wed, 20 Nov 2019 22:52:26 +0000 (08:52 +1000)]
Merge tag 'drm-next-5.5-2019-11-15' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.5-2019-11-15:
amdgpu:
- Fix AVFS handling on SMU7 parts with custom power tables
- Enable Overdrive sysfs interface for Navi parts
- Fix power limit handling on smu11 parts
- Fix pcie link sysfs output for Navi
- Probably cancel MM worker threads on shutdown
Chris Wilson [Thu, 14 Nov 2019 17:25:35 +0000 (17:25 +0000)]
drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree
As we want to be able to run inside atomic context for retiring the
i915_active, and we are no longer allowed to abuse mutex_trylock, split
the tree management portion of i915_active.mutex into an irq-safe
spinlock.
References: a0855d24fc22d ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
References: https://bugs.freedesktop.org/show_bug.cgi?id=111626 Fixes: 274cbf20fd10 ("drm/i915: Push the i915_active.retire into a worker") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191114172535.1116-1-chris@chris-wilson.co.uk
(cherry picked from commit c9ad602feabe4271d2adf1bdae5d8b20c2dc84f1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Don Hiatt [Fri, 15 Nov 2019 23:15:38 +0000 (15:15 -0800)]
drm/i915/guc: Skip suspend/resume GuC action on platforms w/o GuC submission
On some platforms (e.g. KBL) that do not support GuC submission, but
the user enabled the GuC communication (e.g for HuC authentication)
calling the GuC EXIT_S_STATE action results in lose of ability to
enter RC6. We can remove the GuC suspend/resume entirely as we do
not need to save the GuC submission status.
Add intel_guc_submission_is_enabled() function to determine if
GuC submission is active.
v2: Do not suspend/resume the GuC on platforms that do not support
Guc Submission.
v3: Fix typo, move suspend logic to remove goto.
v4: Use intel_guc_submission_is_enabled() to check GuC submission
status.
v5: No need to look at engine to determine if submission is enabled.
Squash fix + intel_guc_submission_is_enabled() patch into one.
v6: Move resume check into intel_guc_resume() for symmetry.
Fix commit Fixes tag.
Reported-by: KiteStramuort <kitestramuort@autistici.org> Reported-by: S. Zharkoff <s.zharkoff@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623 Fixes: ffd5ce22faa4 ("drm/i915/guc: Updates for GuC 32.0.3 firmware") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Tomas Janousek <tomi@nomi.cz> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
(cherry picked from commit 82e0c5bbd6eb1d274b5a3e519ff0ab91f1f8e537) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 14 Nov 2019 22:57:32 +0000 (22:57 +0000)]
drm/i915/gt: Wait for new requests in intel_gt_retire_requests()
Our callers fall into two categories, those passing timeout=0 who just
want to flush request retirements and those passing a timeout that need
to wait for submission completion (e.g. intel_gt_wait_for_idle()).
Currently, we only wait for a snapshot of timelines at the start of the
wait (but there was an expectation that new requests would cause timelines
to appear at the end). However, our callers, such as
intel_gt_wait_for_idle() before suspend, do require us to wait for the
power management requests emitted by retirement as well. If we don't,
then it takes an extra second or two for the background worker to flush
the queue and mark the GT as idle.
Imre Deak [Thu, 14 Nov 2019 15:26:21 +0000 (17:26 +0200)]
drm/i915: Restore GT coarse power gating workaround
The workaround to disable coarse power gating is still needed on SKL
GT3/GT4 machines and since the RC6 context corruption was discovered by
the hardware team also on all GEN9 machines. Restore applying the
workaround.
Fixes: c113236718e8 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/intel_gt_pm_late_selftests/live_rc6_ctx Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191114152621.7235-1-imre.deak@intel.com
(cherry picked from commit 980f87a2edb3e7825949ebd0a7e63ab574c20816) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 13 Nov 2019 18:06:33 +0000 (18:06 +0000)]
drm/i915/fbdev: Restore physical addresses for fb_mmap()
fbdev uses the physical address of our framebuffer for its fb_mmap()
routine. While we need to adapt this address for the new io BAR, we have
to fix v5.4 first! The simplest fix is to restore the smem back to v5.3
and we will then probably have to implement our fbops->fb_mmap() callback
to handle local memory.
Reported-by: Neil MacLeod <freedesktop@nmacleod.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256 Fixes: 5f889b9a61dd ("drm/i915: Disregard drm_mode_config.fb_base") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Neil MacLeod <freedesktop@nmacleod.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191113180633.3947-1-chris@chris-wilson.co.uk
(cherry picked from commit abc5520704ab438099fe352636b30b05c1253bea) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Lionel Landwerlin [Wed, 13 Nov 2019 15:46:39 +0000 (17:46 +0200)]
drm/i915/perf: don't forget noa wait after oa config
I'm observing incoherence metric values, changing from run to run.
It appears the patches introducing noa wait & reconfiguration from
command stream switched places in the series multiple times during the
review. This lead to the dependency of one onto the order to go
missing...
Bruce Chang [Wed, 13 Nov 2019 23:11:04 +0000 (15:11 -0800)]
drm/i915: Avoid atomic context for error capture
io_mapping_map_atomic/kmap_atomic are occasionally taken in error capture
(if there is no aperture preallocated for the use of error capture), but
the error capture and compression routines are now run in normal
context:
<3> [113.316247] BUG: sleeping function called from invalid context at mm/page_alloc.c:4653
<3> [113.318190] in_atomic(): 1, irqs_disabled(): 0, pid: 678, name: debugfs_test
<4> [113.319900] no locks held by debugfs_test/678.
<3> [113.321002] Preemption disabled at:
<4> [113.321130] [<ffffffffa02506d4>] i915_error_object_create+0x494/0x610 [i915]
<4> [113.327259] Call Trace:
<4> [113.327871] dump_stack+0x67/0x9b
<4> [113.328683] ___might_sleep+0x167/0x250
<4> [113.329618] __alloc_pages_nodemask+0x26b/0x1110
<4> [113.334614] pool_alloc.constprop.19+0x14/0x60 [i915]
<4> [113.335951] compress_page+0x7c/0x100 [i915]
<4> [113.337110] i915_error_object_create+0x4bd/0x610 [i915]
<4> [113.338515] i915_capture_gpu_state+0x384/0x1680 [i915]
However, it is not a good idea to run the slow compression inside atomic
context, so we choose not to.
Imre Deak [Tue, 12 Nov 2019 10:46:08 +0000 (12:46 +0200)]
drm/i915: Fix detection for a CMP-V PCH
According to internal documents I found for CMP PCHs the PCI ID 0xA3C1
belongs to a CMP-V chipset. Based on the same docs the programming of
the PCH is compatible with that of KBP. Fix up my previous wrong
assumption accordingly using the SPT programming which in turn is the
basis for KBP.
The original bug reporter verified that this is the correct PCH
identification (the only way we'll program valid DDC pin-pair values to
the GMBUS register) and the Windows team uses the same identification
(that is using the KBP programming model for this PCH).
I filed the necessary Bspec update requests (BSpec/33734).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112051 Fixes: 37c92dc303dd ("drm/i915: Add new CNL PCH ID seen on a CML platform") Reported-and-tested-by: Cyrus <cyrus.lien@canonical.com> Cc: Cyrus <cyrus.lien@canonical.com> Cc: Timo Aaltonen <tjaalton@ubuntu.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191112104608.24587-1-imre.deak@intel.com
(cherry picked from commit 50a5065f4474c2dbc1f7462b45a32d33d7b48d88) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Gerd Hoffmann [Wed, 13 Nov 2019 13:56:12 +0000 (14:56 +0100)]
drm/ttm: fix mmap refcounting
When mapping ttm objects via drm_gem_ttm_mmap() helper
drm_gem_mmap_obj() will take an object reference. That gets
never released due to ttm having its own reference counting.
Fix that by dropping the gem object reference once the ttm mmap
completed (and ttm refcount got bumped).
For that to work properly the drm_gem_object_get() call in
drm_gem_ttm_mmap() must be moved so it happens before calling
obj->funcs->mmap(), otherwise the gem refcount would go down
to zero.
Dave Airlie [Fri, 15 Nov 2019 02:16:43 +0000 (12:16 +1000)]
Merge tag 'drm-intel-next-fixes-2019-11-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- PMU "Frequency" is reported as accumulated cycles
- Avoid OOPS in dumb_create IOCTL when no CRTCs
- Mitigation for userptr put_pages deadlock with trylock_page
- Fix to avoid freeing heartbeat request too early
- Fix LRC coherency issue
- Fix Bugzilla #112212: Avoid screen corruption on MST
- Error path fix to unlock context on failed context VM SETPARAM
- Always consider holding preemption a privileged op in perf/OA
- Preload LUTs if the hw isn't currently using them to avoid color flash on VLV/CHV
- Protect context while grabbing its name for the request
- Don't resize aliasing ppGTT size
- Smaller fixes picked by tooling
Thomas Hellstrom [Wed, 13 Nov 2019 18:02:42 +0000 (19:02 +0100)]
drm/ttm, drm/vmwgfx: Use a configuration option for the TTM dma page pool
Drivers like vmwgfx may want to test whether the dma page pool is present
or not. Since it's activated by default by TTM if compiled-in, define a
hidden configuration option that the driver can test for.
Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com>
Dave Airlie [Thu, 14 Nov 2019 01:06:01 +0000 (11:06 +1000)]
Backmerge i915 security patches from commit 'ea0b163b13ff' into drm-next
This backmerges the branch that ended up in Linus' tree. It removes
all the changes for the rc6 patches from Linus' tree in favour of
a patch that is based on a large refactor that occured.
Imre Deak [Thu, 17 Oct 2019 13:38:31 +0000 (16:38 +0300)]
drm/i915/gen8+: Add RC6 CTX corruption WA
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5:
- Rebased on latest upstream gt_pm refactoring.
v6:
- s/i915_rc6_/intel_rc6_/
- Don't return a value from i915_rc6_ctx_wa_check().
v7:
- Rebased on latest gt rc6 refactoring.
Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[airlied: pull this later version of this patch into drm-next
to make resolving the conflict mess easier.] Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 13 Nov 2019 23:28:30 +0000 (09:28 +1000)]
Merge tag 'arcpgu-updates-2019.07.18' of github.com:abrodkin/linux into drm-next
This is a pretty simple improvement that allows to find encoder
as the one and only (ARC PGU doesn't support more than one) endpoint
instead of using non-standard "encoder-slave" property.
Johan Hovold [Thu, 10 Oct 2019 13:13:30 +0000 (15:13 +0200)]
drm/msm: fix memleak on release
If a process is interrupted while accessing the "gpu" debugfs file and
the drm device struct_mutex is contended, release() could return early
and fail to free related resources.
Note that the return value from release() is ignored.
Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state") Cc: stable <stable@vger.kernel.org> # 4.18 Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191010131333.23635-2-johan@kernel.org
Gwan-gyeong Mun [Wed, 13 Nov 2019 12:52:41 +0000 (14:52 +0200)]
drm/i915: Split a setting of MSA to MST and SST
The setting of MSA is done by the DDI .pre_enable() hook. And when we are
using MST, the MSA is only set to first mst stream by calling of
DDI .pre_eanble() hook. It raies issues to non-first mst streams.
Wrong MSA or missed MSA packets might show scrambled screen or wrong
screen.
This splits a setting of MSA to MST and SST cases. And In the MST case it
will call a setting of MSA after an allocating of Virtual Channel from
MST encoder pre_enable callback.
Chris Wilson [Mon, 11 Nov 2019 13:32:05 +0000 (13:32 +0000)]
drm/i915/execlists: Move reset_active() from schedule-out to schedule-in
The gem_ctx_persistence/smoketest was detecting an odd coherency issue
inside the LRC context image; that the address of the ring buffer did
not match our associated struct intel_ring. As we set the address into
the context image when we pin the ring buffer into place before the
context is active, that leaves the question of where did it get
overwritten. Either the HW context save occurred after our pin which
would imply that our idle barriers are broken, or we overwrote the
context image ourselves. It is only in reset_active() where we dabble
inside the context image outside of a serialised path from schedule-out;
but we could equally perform the operation inside schedule-in which is
then fully serialised with the context pin -- and remains serialised by
the engine pulse with kill_context(). (The only downside, aside from
doing more work inside the engine->active.lock, was the plan to merge
all the reset paths into doing their context scrubbing on schedule-out
needs more thought.)
Chris Wilson [Mon, 11 Nov 2019 13:32:03 +0000 (13:32 +0000)]
drm/i915/userptr: Try to acquire the page lock around set_page_dirty()
set_page_dirty says:
For pages with a mapping this should be done under the page lock
for the benefit of asynchronous memory errors who prefer a
consistent dirty state. This rule can be broken in some special
cases, but should be better not to.
Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).
However, following a try_to_unmap() we may want to remove the userptr and
so call put_pages(). However, try_to_unmap() acquires the page lock and
so we must avoid recursively locking the pages ourselves -- which means
that we cannot safely acquire the lock around set_page_dirty(). Since we
can't be sure of the lock, we have to risk skip dirtying the page, or
else risk calling set_page_dirty() without a lock and so risk fs
corruption.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012 Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References: cb6d7c7dc7ff ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: 505a8ec7e11a ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"")
References: 6dcc693bc57f ("ext4: warn when page is dirtied without buffers") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
(cherry picked from commit 0d4bbe3d407f79438dc4f87943db21f7134cfc65) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Sat, 9 Nov 2019 10:53:56 +0000 (10:53 +0000)]
drm/i915/pmu: "Frequency" is reported as accumulated cycles
We report "frequencies" (actual-frequency, requested-frequency) as the
number of accumulated cycles so that the average frequency over that
period may be determined by the user. This means the units we report to
the user are Mcycles (or just M), not MHz.
Chris Wilson [Mon, 11 Nov 2019 11:43:19 +0000 (11:43 +0000)]
drm/i915: Protect context while grabbing its name for the request
Inside print_request(), we query the context/timeline name. Nothing
immediately protects the context from being freed if the request is
complete -- we rely on serialisation by the caller to keep the name
valid until they finish using it. Inside intel_engine_dump(), we
generally only print the requests in the execution queue protected by the
engine->active.lock, but we also show the pending execlists ports which
are not protected and so require a rcu_read_lock to keep the pointer
valid.
Matt Coffin [Mon, 11 Nov 2019 18:36:31 +0000 (11:36 -0700)]
drm/amdgpu/smu_v11: Unify and fix power limits
[Why]
On Navi10, and presumably arcterus, updating pp_table via sysfs would
not re-scale the maximum possible power limit one can set. On navi10,
the SMU code ignored the power percentage overdrive setting entirely,
and would not allow you to exceed the default power limit at all.
[How]
Adding a function to the SMU interface to get the pptable version of the
default power limit allows ASIC-specific code to provide the correct
maximum-settable power limit for the current pptable.
v3: fix spelling (Alex)
Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Matt Coffin <mcoffin13@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matt Coffin [Fri, 8 Nov 2019 21:28:06 +0000 (14:28 -0700)]
drm/amdgpu/navi10: implement sclk/mclk OD via pp_od_clk_voltage
[Why]
Before this patch, there was no way to use pp_od_clk_voltage on navi
[How]
Similar to the vega20 implementation, but using the common smc_v11_0
headers, implemented the pp_od_clk_voltage API for navi10's pptable
implementation
Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Matt Coffin <mcoffin13@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jesse Zhang [Fri, 8 Nov 2019 10:06:07 +0000 (18:06 +0800)]
drm/amd/amdgpu: finish delay works before release resources
flush/cancel delayed works before doing finalization
to avoid concurrently requests.
Signed-off-by: Jesse Zhang <zhexi.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 8 Nov 2019 16:15:17 +0000 (11:15 -0500)]
drm/amdgpu/powerplay/smu7: fix AVFS handling with custom powerplay table
When a custom powerplay table is provided, we need to update
the OD VDDC flag to avoid AVFS being enabled when it shouldn't be.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Mon, 11 Nov 2019 04:26:36 +0000 (12:26 +0800)]
drm/amdgpu: avoid upload corrupted ta ucode to psp
xgmi, ras, hdcp and dtm ta are actually separated ucode and
need to handled case by case to upload to psp.
We support the case that ta binary have one or multiple of
them built-in. As a result, the driver should check each ta
binariy's availablity before decide to upload them to psp.
In the terminate (unload) case, the driver will check the
context readiness before perform unload activity. It's fine
to keep it as is.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ben Hutchings [Mon, 11 Nov 2019 16:13:24 +0000 (08:13 -0800)]
drm/i915/cmdparser: Fix jump whitelist clearing
When a jump_whitelist bitmap is reused, it needs to be cleared.
Currently this is done with memset() and the size calculation assumes
bitmaps are made of 32-bit words, not longs. So on 64-bit
architectures, only the first half of the bitmap is cleared.
If some whitelist bits are carried over between successive batches
submitted on the same context, this will presumably allow embedding
the rogue instructions that we're trying to reject.
Use bitmap_zero() instead, which gets the calculation right.
Fixes: f8c08d8faee5 ("drm/i915/cmdparser: Add support for backward jumps") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Ville Syrjälä [Wed, 30 Oct 2019 19:08:15 +0000 (21:08 +0200)]
drm/i915: Preload LUTs if the hw isn't currently using them
The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.
However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.
Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.
v2: Deal with uapi vs. hw crtc state split
s/GCM/CGM/ typo fix
Ville Syrjälä [Wed, 6 Nov 2019 17:23:49 +0000 (19:23 +0200)]
drm/i915: Don't oops in dumb_create ioctl if we have no crtcs
Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.
Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.
Chris Wilson [Wed, 6 Nov 2019 22:12:23 +0000 (22:12 +0000)]
drm/i915: Leave the aliasing-ppgtt size alone
The hidden aliasing-ppgtt's size is never revealed, as we only inspect
the front GTT when engaged. However, we were "fixing" the hidden ppgtt
to match, with the net result that we ended up leaking the unused
portion on Braswell were we preallocated the entire set of top level
PDP, see gen8_preallocate_top_level_pdp().
Chris Wilson [Wed, 6 Nov 2019 13:31:29 +0000 (13:31 +0000)]
drm/i915/gt: Only drop heartbeat.systole if the sole owner
Mika spotted that only using cancel_delayed_work() could mean that we
attempted to clear the heartbeat.systole while the worker was still
running. Rectify the situation by only touching the systole from outside
the worker if we suceeded in cancelling the worker before it could run.
The worker is expected to clean up by itself upon idling.
Linus Torvalds [Sun, 10 Nov 2019 21:41:59 +0000 (13:41 -0800)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that have trickled in over the last couple of weeks:
- MAINTAINER update for Cavium/Marvell ThunderX2
- stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for
CAN interfaces
- i.MX fixes for voltage regulator GPIO mappings, fixes voltage
scaling issues
- More i.MX fixes for various issues on i.MX eval boards: interrupt
storm due to u-boot leaving pins in new states, fixing power button
config, a couple of compatible-string corrections.
- Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets
- A few documentation tweaks and a fix of a memory leak in the reset
subsystem"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update Cavium ThunderX2 maintainers
ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
arm64: dts: zii-ultra: fix ARM regulator GPIO handle
ARM: sunxi: Fix CPU powerdown on A83T
ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
arm64: dts: imx8mn: fix compatible string for sdma
arm64: dts: imx8mm: fix compatible string for sdma
reset: fix reset_control_ops kerneldoc comment
ARM: dts: imx6-logicpd: Re-enable SNVS power key
soc: imx: gpc: fix initialiser format
ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
arm64: dts: ls1028a: fix a compatible issue
reset: fix reset_control_get_exclusive kerneldoc comment
reset: fix reset_control_lookup kerneldoc comment
reset: fix of_reset_control_get_count kerneldoc comment
reset: fix of_reset_simple_xlate kerneldoc comment
reset: Fix memory leak in reset_control_array_put()
Linus Torvalds [Sun, 10 Nov 2019 21:29:12 +0000 (13:29 -0800)]
Merge tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO fixes and staging driver from Greg KH:
"Here is a mix of a number of IIO driver fixes for 5.4-rc7, and a whole
new staging driver.
The IIO fixes resolve some reported issues, all are tiny.
The staging driver addition is the vboxsf filesystem, which is the
VirtualBox guest shared folder code. Hans has been trying to get
filesystem reviewers to review the code for many months now, and
Christoph finally said to just merge it in staging now as it is
stand-alone and the filesystem people can review it easier over time
that way.
I know it's late for this big of an addition, but it is stand-alone.
The code has been in linux-next for a while, long enough to pick up a
few tiny fixes for it already so people are looking at it.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: Fix error return code in vboxsf_fill_super()
staging: vboxsf: fix dereference of pointer dentry before it is null checked
staging: vboxsf: Remove unused including <linux/version.h>
staging: Add VirtualBox guest shared folder (vboxsf) support
iio: adc: stm32-adc: fix stopping dma
iio: imu: inv_mpu6050: fix no data on MPU6050
iio: srf04: fix wrong limitation in distance measuring
iio: imu: adis16480: make sure provided frequency is positive
Linus Torvalds [Sun, 10 Nov 2019 21:14:48 +0000 (13:14 -0800)]
Merge tag 'char-misc-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of late-arrival driver fixes for issues reported for
some char/misc drivers for 5.4-rc7
These all come from the different subsystem/driver maintainers as
things that they had reports for and wanted to see fixed.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
intel_th: pci: Add Jasper Lake PCH support
intel_th: pci: Add Comet Lake PCH support
intel_th: msu: Fix possible memory leak in mode_store()
intel_th: msu: Fix overflow in shift of an unsigned int
intel_th: msu: Fix missing allocation failure check on a kstrndup
intel_th: msu: Fix an uninitialized mutex
intel_th: gth: Fix the window switching sequence
soundwire: slave: fix scanf format
soundwire: intel: fix intel_register_dai PDI offsets and numbers
interconnect: Add locking in icc_set_tag()
interconnect: qcom: Fix icc_onecell_data allocation
soundwire: depend on ACPI || OF
soundwire: depend on ACPI
thunderbolt: Drop unnecessary read when writing LC command in Ice Lake
thunderbolt: Fix lockdep circular locking depedency warning
thunderbolt: Read DP IN adapter first two dwords in one go
Linus Torvalds [Sun, 10 Nov 2019 20:07:47 +0000 (12:07 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes for x86:
- Make the tsc=reliable/nowatchdog command line parameter work again.
It was broken with the introduction of the early TSC clocksource.
- Prevent the evaluation of exception stacks before they are set up.
This causes a crash in dumpstack because the stack walk termination
gets screwed up.
- Prevent a NULL pointer dereference in the rescource control file
system.
- Avoid bogus warnings about APIC id mismatch related to the LDR
which can happen when the LDR is not in use and therefore not
initialized. Only evaluate that when the APIC is in logical
destination mode"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_early
x86/dumpstack/64: Don't evaluate exception stacks before setup
x86/apic/32: Avoid bogus LDR warnings
x86/resctrl: Prevent NULL pointer dereference when reading mondata
Linus Torvalds [Sun, 10 Nov 2019 20:03:58 +0000 (12:03 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for timekeepoing and clocksource drivers:
- VDSO data was updated conditional on the availability of a VDSO
capable clocksource. This causes the VDSO functions which do not
depend on a VDSO capable clocksource to operate on stale data.
Always update unconditionally.
- Prevent a double free in the mediatek driver
- Use the proper helper in the sh_mtu2 driver so it won't attempt to
initialize non-existing interrupts"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping/vsyscall: Update VDSO data unconditionally
clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()
clocksource/drivers/mediatek: Fix error handling
Linus Torvalds [Sun, 10 Nov 2019 20:00:47 +0000 (12:00 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two fixes for scheduler regressions:
- Plug a subtle race condition which was introduced with the rework
of the next task selection functionality. The change of task
properties became unprotected which can be observed inconsistently
causing state corruption.
- A trivial compile fix for CONFIG_CGROUPS=n"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix pick_next_task() vs 'change' pattern race
sched/core: Fix compilation error when cgroup not selected
Linus Torvalds [Sun, 10 Nov 2019 19:51:11 +0000 (11:51 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixlet from Thomas Gleixner:
"A trivial fix for a kernel doc regression where an argument change was
not reflected in the documentation"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
Linus Torvalds [Sat, 9 Nov 2019 16:51:37 +0000 (08:51 -0800)]
Merge tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few regressions and fixes for stable.
Regressions:
- fix a race leading to metadata space leak after task received a
signal
- un-deprecate 2 ioctls, marked as deprecated by mistake
Fixes:
- fix limit check for number of devices during chunk allocation
- fix a race due to double evaluation of i_size_read inside max()
macro, can cause a crash
- remove wrong device id check in tree-checker"
* tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: un-deprecate ioctls START_SYNC and WAIT_SYNC
btrfs: save i_size to avoid double evaluation of i_size_read in compress_file_range
Btrfs: fix race leading to metadata space leak after task received signal
btrfs: tree-checker: Fix wrong check on max devid
btrfs: Consider system chunk array size for new SYSTEM chunks
Linus Torvalds [Sat, 9 Nov 2019 16:47:03 +0000 (08:47 -0800)]
Merge tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- cpwd: fix build regression
- pm8916_wdt: fix pretimeout registration flow
- meson: Fix the wrong value of left time
- imx_sc_wdt: Pretimeout should follow SCU firmware format
- bd70528: Add MODULE_ALIAS to allow module auto loading
* tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: bd70528: Add MODULE_ALIAS to allow module auto loading
watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format
watchdog: meson: Fix the wrong value of left time
watchdog: pm8916_wdt: fix pretimeout registration flow
watchdog: cpwd: fix build regression
2) Fix powerpc bpf tail call implementation, from Eric Dumazet.
3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.
4) Fix crash in ebtables when using dnat target, from Florian Westphal.
5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
Fainelli.
6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.
7) Various KCSAN fixes all over the networking, from Eric Dumazet.
8) Memory leaks in mlx5 driver, from Alex Vesker.
9) SMC interface refcounting fix, from Ursula Braun.
10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.
11) Add a TX lock to synchonize the kTLS TX path properly with crypto
operations. From Jakub Kicinski.
12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
Garzarella.
13) Infinite loop in Intel ice driver, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
ixgbe: need_wakeup flag might not be set for Tx
i40e: need_wakeup flag might not be set for Tx
igb/igc: use ktime accessors for skb->tstamp
i40e: Fix for ethtool -m issue on X722 NIC
iavf: initialize ITRN registers with correct values
ice: fix potential infinite loop because loop counter being too small
qede: fix NULL pointer deref in __qede_remove()
net: fix data-race in neigh_event_send()
vsock/virtio: fix sock refcnt holding during the shutdown
net: ethernet: octeon_mgmt: Account for second possible VLAN header
mac80211: fix station inactive_time shortly after boot
net/fq_impl: Switch to kvmalloc() for memory allocation
mac80211: fix ieee80211_txq_setup_flows() failure path
ipv4: Fix table id reference in fib_sync_down_addr
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
net: usb: qmi_wwan: add support for DW5821e with eSIM support
CDC-NCM: handle incomplete transfer of MTU
nfc: netlink: fix double device reference drop
NFC: st21nfca: fix double free
...
Linus Torvalds [Sat, 9 Nov 2019 02:15:55 +0000 (18:15 -0800)]
Merge tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two NVMe device removal crash fixes, and a compat fixup for for an
ioctl that was introduced in this release (Anton, Charles, Max - via
Keith)
- Missing error path mutex unlock for drbd (Dan)
- cgroup writeback fixup on dead memcg (Tejun)
- blkcg online stats print fix (Tejun)
* tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block:
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
block: drbd: remove a stray unlock in __drbd_send_protocol()
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
David S. Miller [Sat, 9 Nov 2019 00:50:14 +0000 (16:50 -0800)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2019-11-08
This series contains fixes to igb, igc, ixgbe, i40e, iavf and ice
drivers.
Colin Ian King fixes a potentially wrap-around counter in a for-loop.
Nick fixes the default ITR values for the iavf driver to 50 usecs
interval.
Arkadiusz fixes 'ethtool -m' for X722 devices where the correct value
cannot be obtained from the firmware, so add X722 to the check to ensure
the wrong value is not returned.
Jake fixes igb and igc drivers in their implementation of launch time
support by declaring skb->tstamp value as ktime_t instead of s64.
Magnus fixes ixgbe and i40e where the need_wakeup flag for transmit may
not be set for AF_XDP sockets that are only used to send packets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Magnus Karlsson [Fri, 8 Nov 2019 19:58:10 +0000 (20:58 +0100)]
ixgbe: need_wakeup flag might not be set for Tx
The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an
interrupt since interrupts are disabled in the napi poll loop) between
the time we stopped processing the Tx completions and interrupts are
enabled again. In this case, the need_wakeup flag will have been
cleared at the end of the Tx completion processing as we believe we
will get an interrupt from the outstanding completion at a later point
in time. But if this completion interrupt occurs before interrupts
are enable, we lose it and should at that point really have set the
need_wakeup flag since there are no more outstanding completions that
can generate an interrupt to continue the processing. When this
happens, user space will see a Tx queue need_wakeup of 0 and skip
issuing a syscall, which means will never get into the Tx processing
again and we have a deadlock.
This patch introduces a quick fix for this issue by just setting the
need_wakeup flag for Tx to 1 all the time. I am working on a proper
fix for this that will toggle the flag appropriately, but it is more
challenging than I anticipated and I am afraid that this patch will
not be completed before the merge window closes, therefore this easier
fix for now. This fix has a negative performance impact in the range
of 0% to 4%. Towards the higher end of the scale if you have driver
and application on the same core and issue a lot of packets, and
towards no negative impact if you use two cores, lower transmission
speeds and/or a workload that also receives packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Magnus Karlsson [Fri, 8 Nov 2019 19:58:09 +0000 (20:58 +0100)]
i40e: need_wakeup flag might not be set for Tx
The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an
interrupt since interrupts are disabled in the napi poll loop) between
the time we stopped processing the Tx completions and interrupts are
enabled again. In this case, the need_wakeup flag will have been
cleared at the end of the Tx completion processing as we believe we
will get an interrupt from the outstanding completion at a later point
in time. But if this completion interrupt occurs before interrupts
are enable, we lose it and should at that point really have set the
need_wakeup flag since there are no more outstanding completions that
can generate an interrupt to continue the processing. When this
happens, user space will see a Tx queue need_wakeup of 0 and skip
issuing a syscall, which means will never get into the Tx processing
again and we have a deadlock.
This patch introduces a quick fix for this issue by just setting the
need_wakeup flag for Tx to 1 all the time. I am working on a proper
fix for this that will toggle the flag appropriately, but it is more
challenging than I anticipated and I am afraid that this patch will
not be completed before the merge window closes, therefore this easier
fix for now. This fix has a negative performance impact in the range
of 0% to 4%. Towards the higher end of the scale if you have driver
and application on the same core and issue a lot of packets, and
towards no negative impact if you use two cores, lower transmission
speeds and/or a workload that also receives packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
projects / users / jedix / linux-maple.git / log