* tag 'net-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: mctp: handle skb cleanup on sock_queue failures
net: mdiobus: fix an OF node reference leak
octeontx2-pf: fix error handling of devlink port in rvu_rep_create()
octeontx2-pf: fix netdev memory leak in rvu_rep_create()
psample: adjust size if rate_as_probability is set
netdev-genl: avoid empty messages in queue dump
net: dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic
selftests: openvswitch: fix tcpdump execution
net: usb: qmi_wwan: add Quectel RG255C
net: phy: avoid undefined behavior in *_led_polarity_set()
netfilter: ipset: Fix for recursive locking warning
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
can: m_can: fix missed interrupts with m_can_pci
can: m_can: set init flag earlier in probe
rtnetlink: Try the outer netns attribute in rtnl_get_peer_net().
net: netdevsim: fix nsim_pp_hold_write()
idpf: trigger SW interrupt when exiting wb_on_itr mode
idpf: add support for SW triggered interrupts
qed: fix possible uninit pointer read in qed_mcp_nvm_info_populate()
net: ethernet: bgmac-platform: fix an OF node reference leak
...
Linus Torvalds [Thu, 19 Dec 2024 16:53:51 +0000 (08:53 -0800)]
Merge tag 'mmc-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- mtk-sd: Cleanup the wakeup configuration in error/remove-path
- sdhci-tegra: Correct quirk for ADMA2 length
* tag 'mmc-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mtk-sd: disable wakeup in .remove() and in the error path of .probe()
mmc: sdhci-tegra: Remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk
Linus Torvalds [Thu, 19 Dec 2024 16:50:05 +0000 (08:50 -0800)]
Merge tag 'pwm/for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix regression in pwm-stm32 driver when converting to new waveform
support
Fabrice Gasnier found and fixed a regression I introduced with
v6.13-rc1 when converting the stm32 pwm driver to support the new
waveform stuff. On some hardware variants this completely broke the
driver"
* tag 'pwm/for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix complementary output in round_waveform_tohw()
Linus Torvalds [Thu, 19 Dec 2024 16:45:37 +0000 (08:45 -0800)]
Merge tag 'v6.13-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Two fixes for better handling maximum outstanding requests
- Fix simultaneous negotiate protocol race
* tag 'v6.13-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: conn lock to serialize smb2 negotiate
ksmbd: fix broken transfers when exceeding max simultaneous operations
ksmbd: count all requests in req_running counter
====================
net: fib_rules: Add flow label selector support
In some deployments users would like to encode path information into
certain bits of the IPv6 flow label, the UDP source port and the DSCP
and use this information to route packets accordingly.
Redirecting traffic to a routing table based on the flow label is not
currently possible with Linux as FIB rules cannot match on it despite
the flow label being available in the IPv6 flow key.
This patchset extends FIB rules to match on the flow label with a mask.
Future patches will add mask attributes to L4 ports and DSCP matches.
Patches #1-#5 gradually extend FIB rules to match on the flow label.
Patches #6-#7 allow user space to specify a flow label in route get
requests. This is useful for both debugging and testing.
Patch #8 adjusts the fib6_table_lookup tracepoint to print the flow
label to the trace buffer for better observability.
Patch #9 extends the FIB rule selftest with flow label test cases while
utilizing the route get functionality from patch #6.
====================
Ido Schimmel [Mon, 16 Dec 2024 17:12:01 +0000 (19:12 +0200)]
selftests: fib_rule_tests: Add flow label selector match tests
Add tests for the new FIB rule flow label selector. Test both good and bad
flows and with both input and output routes.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: flowlabel redirect to table [ OK ]
TEST: rule6 check: flowlabel no redirect to table [ OK ]
TEST: rule6 del by pref: flowlabel redirect to table [ OK ]
TEST: rule6 check: iif flowlabel redirect to table [ OK ]
TEST: rule6 check: iif flowlabel no redirect to table [ OK ]
TEST: rule6 del by pref: iif flowlabel redirect to table [ OK ]
TEST: rule6 check: flowlabel masked redirect to table [ OK ]
TEST: rule6 check: flowlabel masked no redirect to table [ OK ]
TEST: rule6 del by pref: flowlabel masked redirect to table [ OK ]
TEST: rule6 check: iif flowlabel masked redirect to table [ OK ]
TEST: rule6 check: iif flowlabel masked no redirect to table [ OK ]
TEST: rule6 del by pref: iif flowlabel masked redirect to table [ OK ]
[...]
Tests passed: 268
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ido Schimmel [Mon, 16 Dec 2024 17:12:00 +0000 (19:12 +0200)]
tracing: ipv6: Add flow label to fib6_table_lookup tracepoint
The different parameters affecting the IPv6 route lookup are printed to
the trace buffer by the fib6_table_lookup tracepoint. Add the IPv6 flow
label for better observability as it can affect the route lookup both in
terms of multipath hash calculation and policy based routing (FIB
rules). Example:
# echo 1 > /sys/kernel/tracing/events/fib6/fib6_table_lookup/enable
# ip -6 route get ::1 flowlabel 0x12345 ipproto udp sport 12345 dport 54321 &> /dev/null
# cat /sys/kernel/tracing/trace_pipe
ip-358 [010] ..... 44.897484: fib6_table_lookup: table 255 oif 0 iif 1 proto 17 ::/12345 -> ::1/54321 flowlabel 0x12345 tos 0 scope 0 flags 0 ==> dev lo gw :: err 0
Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ido Schimmel [Mon, 16 Dec 2024 17:11:58 +0000 (19:11 +0200)]
ipv6: Add flow label to route get requests
The default IPv6 multipath hash policy takes the flow label into account
when calculating a multipath hash and previous patches added a flow
label selector to IPv6 FIB rules.
Allow user space to specify a flow label in route get requests by adding
a new netlink attribute and using its value to populate the "flowlabel"
field in the IPv6 flow info structure prior to a route lookup.
Deny the attribute in RTM_{NEW,DEL}ROUTE requests by checking for it in
rtm_to_fib6_config() and returning an error if present.
A subsequent patch will use this capability to test the new flow label
selector in IPv6 FIB rules.
Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ido Schimmel [Mon, 16 Dec 2024 17:11:56 +0000 (19:11 +0200)]
net: fib_rules: Enable flow label selector usage
Now that both IPv4 and IPv6 correctly handle the new flow label
attributes, enable user space to configure FIB rules that make use of
the flow label by changing the policy to stop rejecting them and
accepting 32 bit values in big-endian byte order.
Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ido Schimmel [Mon, 16 Dec 2024 17:11:55 +0000 (19:11 +0200)]
ipv6: fib_rules: Add flow label support
Implement support for the new flow label selector which allows IPv6 FIB
rules to match on the flow label with a mask. Ensure that both flow
label attributes are specified (or none) and that the mask is valid.
Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ido Schimmel [Mon, 16 Dec 2024 17:11:54 +0000 (19:11 +0200)]
ipv4: fib_rules: Reject flow label attributes
IPv4 FIB rules cannot match on flow label so reject requests that try to
add such rules. Do that in the IPv4 configure callback as the netlink
policy resides in the core and used by both IPv4 and IPv6.
Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new FIB rule attributes which will allow user space to match on the
IPv6 flow label with a mask. Temporarily set the type of the attributes
to 'NLA_REJECT' while support is being added in the IPv6 code.
Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jeremy Kerr [Wed, 18 Dec 2024 03:53:01 +0000 (11:53 +0800)]
net: mctp: handle skb cleanup on sock_queue failures
Currently, we don't use the return value from sock_queue_rcv_skb, which
means we may leak skbs if a message is not successfully queued to a
socket.
Instead, ensure that we're freeing the skb where the sock hasn't
otherwise taken ownership of the skb by adding checks on the
sock_queue_rcv_skb() to invoke a kfree on failure.
In doing so, rather than using the 'rc' value to trigger the
kfree_skb(), use the skb pointer itself, which is more explicit.
Also, add a kunit test for the sock delivery failure cases.
Joe Hattori [Wed, 18 Dec 2024 03:51:06 +0000 (12:51 +0900)]
net: mdiobus: fix an OF node reference leak
fwnode_find_mii_timestamper() calls of_parse_phandle_with_fixed_args()
but does not decrement the refcount of the obtained OF node. Add an
of_node_put() call before returning from the function.
This bug was detected by an experimental static analysis tool that I am
developing.
Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241218035106.1436405-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 19 Dec 2024 08:55:21 +0000 (09:55 +0100)]
Merge tag 'nf-24-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following series contains two fixes for Netfilter/IPVS:
1) Possible build failure in IPVS on systems with less than 512MB
memory due to incorrect use of clamp(), from David Laight.
2) Fix bogus lockdep nesting splat with ipset list:set type,
from Phil Sutter.
netfilter pull request 24-12-19
* tag 'nf-24-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: Fix for recursive locking warning
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
====================
Nikita Yushchenko [Mon, 16 Dec 2024 07:19:55 +0000 (12:19 +0500)]
net: renesas: rswitch: align mdio C45 operations with datasheet
Per rswitch datasheet, software can know that mdio operation completed
either by polling MPSM.PSME bit, or via interrupt.
Instead, the driver currently polls for interrupt status bit. Although
this still provides correct result, it requires additional register
operations to clean the interrupt status bits, and generally looks wrong.
Fix it to poll MPSM.PSME bit, as the datasheet suggests.
Jakub Kicinski [Wed, 18 Dec 2024 02:25:08 +0000 (18:25 -0800)]
netdev-genl: avoid empty messages in queue dump
Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down it has no queues.
Fixes: 6b6171db7fc8 ("netdev-genl: Add netlink framework functions for queue") Reported-by: syzbot+0a884bc2d304ce4af70f@syzkaller.appspotmail.com Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241218022508.815344-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 16 Dec 2024 13:50:59 +0000 (15:50 +0200)]
net: dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic
Robert Hodaszi reports that locally terminated traffic towards
VLAN-unaware bridge ports is broken with ocelot-8021q. He is describing
the same symptoms as for commit 1f9fc48fd302 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges").
For context, the set merged as "VLAN fixes for Ocelot driver":
https://lore.kernel.org/netdev/20240815000707.2006121-1-vladimir.oltean@nxp.com/
was developed in a slightly different form earlier this year, in January.
Initially, the switch was unconditionally configured to set OCELOT_ES0_TAG
when using ocelot-8021q, regardless of port operating mode.
This led to the situation where VLAN-unaware bridge ports would always
push their PVID - see ocelot_vlan_unaware_pvid() - a negligible value
anyway - into RX packets. To strip this in software, we would have needed
DSA to know what private VID the switch chose for VLAN-unaware bridge
ports, and pushed into the packets. This was implemented downstream, and
a remnant of it remains in the form of a comment mentioning
ds->ops->get_private_vid(), as something which would maybe need to be
considered in the future.
However, for upstream, it was deemed inappropriate, because it would
mean introducing yet another behavior for stripping VLAN tags from
VLAN-unaware bridge ports, when one already existed (ds->untag_bridge_pvid).
The latter has been marked as obsolete along with an explanation why it
is logically broken, but still, it would have been confusing.
So, for upstream, felix_update_tag_8021q_rx_rule() was developed, which
essentially changed the state of affairs from "Felix with ocelot-8021q
delivers all packets as VLAN-tagged towards the CPU" into "Felix with
ocelot-8021q delivers all packets from VLAN-aware bridge ports towards
the CPU". This was done on the premise that in VLAN-unaware mode,
there's nothing useful in the VLAN tags, and we can avoid introducing
ds->ops->get_private_vid() in the DSA receive path if we configure the
switch to not push those VLAN tags into packets in the first place.
Unfortunately, and this is when the trainwreck started, the selftests
developed initially and posted with the series were not re-ran.
dsa_software_vlan_untag() was initially written given the assumption
that users of this feature would send _all_ traffic as VLAN-tagged.
It was only partially adapted to the new scheme, by removing
ds->ops->get_private_vid(), which also used to be necessary in
standalone ports mode.
Where the trainwreck became even worse is that I had a second opportunity
to think about this, when the dsa_software_vlan_untag() logic change
initially broke sja1105, in commit 1f9fc48fd302 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges"). I did not connect the dots that
it also breaks ocelot-8021q, for pretty much the same reason that not
all received packets will be VLAN-tagged.
To be compatible with the optimized Felix control path which runs
felix_update_tag_8021q_rx_rule() to only push VLAN tags when useful (in
VLAN-aware mode), we need to restore the old dsa_software_vlan_untag()
logic. The blamed commit introduced the assumption that
dsa_software_vlan_untag() will see only VLAN-tagged packets, assumption
which is false. What corrupts RX traffic is the fact that we call
skb_vlan_untag() on packets which are not VLAN-tagged in the first
place.
Fixes: 93e4649efa96 ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges") Reported-by: Robert Hodaszi <robert.hodaszi@digi.com> Closes: https://lore.kernel.org/netdev/20241215163334.615427-1-robert.hodaszi@digi.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241216135059.1258266-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 19 Dec 2024 03:20:20 +0000 (19:20 -0800)]
Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
idpf: trigger SW interrupt when exiting wb_on_itr mode
Joshua Hay says:
This patch series introduces SW triggered interrupt support for idpf,
then uses said interrupt to fix a race condition between completion
writebacks and re-enabling interrupts.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: trigger SW interrupt when exiting wb_on_itr mode
idpf: add support for SW triggered interrupts
====================
Adrian Moreno [Tue, 17 Dec 2024 21:16:51 +0000 (22:16 +0100)]
selftests: openvswitch: fix tcpdump execution
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Jakub Kicinski [Thu, 19 Dec 2024 03:17:08 +0000 (19:17 -0800)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: add support for devlink health events
Przemek Kitszel says:
Reports for two kinds of events are implemented, Malicious Driver
Detection (MDD) and Tx hang.
Patches 1, 2, 3: core improvements (checkpatch.pl, devlink extension)
Patch 4: rename current ice devlink/ files
Patches 5, 6, 7: ice devlink health infra + reporters
Mateusz did good job caring for this series, and hardening the code.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add MDD logging via devlink health
ice: add Tx hang devlink health reporter
ice: rename devlink_port.[ch] to port.[ch]
devlink: add devlink_fmsg_dump_skb() function
devlink: add devlink_fmsg_put() macro
checkpatch: don't complain on _Generic() use
====================
Fixes: ff4e538c8c3e ("page_pool: add a lockdep check for recycling in hardirq") Reported-by: syzbot+f56a5c5eac2b28439810@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/671e10df.050a0220.2b8c0f.01cf.GAE@google.com/T/ Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241217135121.326370-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 19 Dec 2024 01:51:38 +0000 (17:51 -0800)]
Merge tag 'linux-can-fixes-for-6.13-20241218' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-12-18
There are 2 patches by Matthias Schiffer for the m_can_pci driver that
handles the m_can cores found on the Intel Elkhart Lake processor.
They fix the initialization and the interrupt handling under high CAN
bus load.
* tag 'linux-can-fixes-for-6.13-20241218' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: m_can: fix missed interrupts with m_can_pci
can: m_can: set init flag earlier in probe
====================
Arnd Bergmann [Tue, 17 Dec 2024 08:10:34 +0000 (09:10 +0100)]
net: phy: avoid undefined behavior in *_led_polarity_set()
gcc runs into undefined behavior at the end of the three led_polarity_set()
callback functions if it were called with a zero 'modes' argument and it
just ends the function there without returning from it.
This gets flagged by 'objtool' as a function that continues on
to the next one:
drivers/net/phy/aquantia/aquantia_leds.o: warning: objtool: aqr_phy_led_polarity_set+0xf: can't find jump dest instruction at .text+0x5d9
drivers/net/phy/intel-xway.o: warning: objtool: xway_gphy_led_polarity_set() falls through to next function xway_gphy_config_init()
drivers/net/phy/mxl-gpy.o: warning: objtool: gpy_led_polarity_set() falls through to next function gpy_led_hw_control_get()
There is no point to micro-optimize the behavior here to save a single-digit
number of bytes in the kernel, so just change this to a "return -EINVAL"
as we do when any unexpected bits are set.
Fixes: 1758af47b98c ("net: phy: intel-xway: add support for PHY LEDs") Fixes: 9d55e68b19f2 ("net: phy: aquantia: correctly describe LED polarity override") Fixes: eb89c79c1b8f ("net: phy: mxl-gpy: correctly describe LED polarity") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241217081056.238792-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Phil Sutter [Tue, 17 Dec 2024 19:56:55 +0000 (20:56 +0100)]
netfilter: ipset: Fix for recursive locking warning
With CONFIG_PROVE_LOCKING, when creating a set of type bitmap:ip, adding
it to a set of type list:set and populating it from iptables SET target
triggers a kernel warning:
| WARNING: possible recursive locking detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| --------------------------------------------
| ping/4018 is trying to acquire lock:
| ffff8881094a6848 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
|
| but task is already holding lock:
| ffff88811034c048 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
This is a false alarm: ipset does not allow nested list:set type, so the
loop in list_set_kadd() can never encounter the outer set itself. No
other set type supports embedded sets, so this is the only case to
consider.
To avoid the false report, create a distinct lock class for list:set
type ipset locks.
Fixes: f830837f0eed ("netfilter: ipset: list:set set type support") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Yafang Shao [Tue, 10 Dec 2024 02:27:06 +0000 (10:27 +0800)]
net/mlx5e: Report rx_discards_phy via rx_dropped
We noticed a high number of rx_discards_phy events on certain servers while
running `ethtool -S`. However, this critical counter is not currently
included in the standard /proc/net/dev statistics file, making it difficult
to monitor effectively—especially given the diversity of vendors across a
large fleet of servers.
Let's report it via the standard rx_dropped metric.
Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Gal Pressman <gal@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20241210022706.6665-1-laoar.shao@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Laight [Sat, 14 Dec 2024 17:30:53 +0000 (17:30 +0000)]
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
The 'max_avail' value is calculated from the system memory
size using order_base_2().
order_base_2(x) is defined as '(x) ? fn(x) : 0'.
The compiler generates two copies of the code that follows
and then expands clamp(max, min, PAGE_SHIFT - 12) (11 on 32bit).
This triggers a compile-time assert since min is 5.
In reality a system would have to have less than 512MB memory
for the bounds passed to clamp to be reversed.
Swap the order of the arguments to clamp() to avoid the warning.
Replace the clamp_val() on the line below with clamp().
clamp_val() is just 'an accident waiting to happen' and not needed here.
Detected by compile time checks added to clamp(), specifically:
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Closes: https://lore.kernel.org/all/CA+G9fYsT34UkGFKxus63H6UVpYi5GRZkezT9MRLfAbM3f6ke0g@mail.gmail.com/ Fixes: 4f325e26277b ("ipvs: dynamically limit the connection hash table") Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: David Laight <david.laight@aculab.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Wed, 18 Dec 2024 22:17:21 +0000 (14:17 -0800)]
Merge tag 'for-6.13-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- tree-checker catches invalid number of inline extent references
- zoned mode fixes:
- enhance zone append IO command so it also detects emulated writes
- handle bio splitting at sectorsize boundary
- when deleting a snapshot, fix a condition for visiting nodes in reloc
trees
* tag 'for-6.13-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: tree-checker: reject inline extent items with 0 ref count
btrfs: split bios to the fs sector size boundary
btrfs: use bio_is_zone_append() in the completion handler
btrfs: fix improper generation check in snapshot delete
Linus Torvalds [Wed, 18 Dec 2024 20:52:57 +0000 (12:52 -0800)]
Merge tag 'cxl-fixes-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Ira Weiny:
- prevent probe failure when non-critical RAS unmasking fails
- fix CXL 1.1 link status sysfs attribute
- fix 4 way (and greater) switch interleave region creation
* tag 'cxl-fixes-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Fix region creation for greater than x2 switches
cxl/pci: Check dport->regs.rcd_pcie_cap availability before accessing
cxl/pci: Fix potential bogus return value upon successful probing
Import tests for the following features (folder names in brackets):
ECN (ecn) : RFC 3168
Close (close) : RFC 9293
TCP_INFO (tcp_info) : RFC 9293
Fast recovery (fast_recovery) : RFC 5681
Timestamping (timestamping) : RFC 1323
Nagle (nagle) : RFC 896
Selective Acknowledgments (sack) : RFC 2018
Recent Timestamp (ts_recent) : RFC 1323
Send file (sendfile)
Syscall bad arg (syscall_bad_arg)
Validate (validate)
Blocking (blocking)
Splice (splice)
End of record (eor)
Limited transmit (limited_transmit)
Procedure to import and test the packetdrill tests into upstream linux
is explained in the first patch of this series
These tests have many authors. We only import them here from
github.com/google/packetdrill. Thanks to the following authors fo their
contributions over the years to these tests: Neal Cardwell, Shuo Chen,
Yuchung Cheng, Jerry Chu, Eric Dumazet, Luke Hsiao, Priyaranjan Jha,
Chonggang Li, Tanner Love, John Sperbeck, Wei Wang and Maciej
Żenczykowski. For more info see the original github commits, such as
https://github.com/google/packetdrill/commit/8229c94928ac.
====================
Linus Torvalds [Wed, 18 Dec 2024 18:03:33 +0000 (10:03 -0800)]
Merge tag 'trace-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Replace trace_check_vprintf() with test_event_printk() and
ignore_event()
The function test_event_printk() checks on boot up if the trace event
printf() formats dereference any pointers, and if they do, it then
looks at the arguments to make sure that the pointers they dereference
will exist in the event on the ring buffer. If they do not, it issues
a WARN_ON() as it is a likely bug.
But this isn't the case for the strings that can be dereferenced with
"%s", as some trace events (notably RCU and some IPI events) save a
pointer to a static string in the ring buffer. As the string it points
to lives as long as the kernel is running, it is not a bug to
reference it, as it is guaranteed to be there when the event is read.
But it is also possible (and a common bug) to point to some allocated
string that could be freed before the trace event is read and the
dereference is to bad memory. This case requires a run time check.
The previous way to handle this was with trace_check_vprintf() that
would process the printf format piece by piece and send what it didn't
care about to vsnprintf() to handle arguments that were not strings.
This kept it from having to reimplement vsnprintf(). But it relied on
va_list implementation and for architectures that copied the va_list
and did not pass it by reference, it wasn't even possible to do this
check and it would be skipped. As 64bit x86 passed va_list by
reference, most events were tested and this kept out bugs where
strings would have been dereferenced after being freed.
Instead of relying on the implementation of va_list, extend the boot
up test_event_printk() function to validate all the "%s" strings that
can be validated at boot, and for the few events that point to strings
outside the ring buffer, flag both the event and the field that is
dereferenced as "needs_test". Then before the event is printed, a call
to ignore_event() is made, and if the event has the flag set, it
iterates all its fields and for every field that is to be tested, it
will read the pointer directly from the event in the ring buffer and
make sure that it is valid. If the pointer is not valid, it will print
a WARN_ON(), print out to the trace that the event has unsafe memory
and ignore the print format.
With this new update, the trace_check_vprintf() can be safely removed
and now all events can be verified regardless of architecture"
* tag 'trace-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Check "%s" dereference via the field and not the TP_printk format
tracing: Add "%s" check in test_event_printk()
tracing: Add missing helper functions in event pointer dereference check
tracing: Fix test_event_printk() to process entire print argument
Linus Torvalds [Wed, 18 Dec 2024 17:55:55 +0000 (09:55 -0800)]
Merge tag 'hyperv-fixes-signed-20241217' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Various fixes to Hyper-V tools in the kernel tree (Dexuan Cui, Olaf
Hering, Vitaly Kuznetsov)
- Fix a bug in the Hyper-V TSC page based sched_clock() (Naman Jain)
- Two bug fixes in the Hyper-V utility functions (Michael Kelley)
- Convert open-coded timeouts to secs_to_jiffies() in Hyper-V drivers
(Easwar Hariharan)
* tag 'hyperv-fixes-signed-20241217' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: reduce resource usage in hv_kvp_daemon
tools/hv: add a .gitignore file
tools/hv: reduce resouce usage in hv_get_dns_info helper
hv/hv_kvp_daemon: Pass NIC name to hv_get_dns_info as well
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet
Drivers: hv: util: Don't force error code to ENODEV in util_probe()
tools/hv: terminate fcopy daemon if read from uio fails
drivers: hv: Convert open-coded timeouts to secs_to_jiffies()
tools: hv: change permissions of NetworkManager configuration file
x86/hyperv: Fix hv tsc page based sched_clock for hibernation
tools: hv: Fix a complier warning in the fcopy uio daemon
Juergen Gross [Wed, 18 Dec 2024 08:02:28 +0000 (09:02 +0100)]
x86/static-call: fix 32-bit build
In 32-bit x86 builds CONFIG_STATIC_CALL_INLINE isn't set, leading to
static_call_initialized not being available.
Define it as "0" in that case.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates") Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dr. David Alan Gilbert [Mon, 16 Dec 2024 16:56:05 +0000 (16:56 +0000)]
net: Remove bouncing hippi list
linux-hippi is bouncing with:
<linux-hippi@sunsite.dk>:
Sorry, no mailbox here by that name. (#5.1.1)
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 15 Dec 2024 17:43:55 +0000 (17:43 +0000)]
net: dsa: qca8k: Fix inconsistent use of jiffies vs milliseconds
wait_for_complete_timeout() expects a timeout in jiffies. With the
driver, some call sites converted QCA8K_ETHERNET_TIMEOUT to jiffies,
others did not. Make the code consistent by changes the #define to
include a call to msecs_to_jiffies, and remove all other calls to
msecs_to_jiffies.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: from Christian would be very welcome. Signed-off-by: David S. Miller <davem@davemloft.net>
Fabrice Gasnier [Tue, 17 Dec 2024 15:00:21 +0000 (16:00 +0100)]
pwm: stm32: Fix complementary output in round_waveform_tohw()
When the timer supports complementary output, the CCxNE bit must be set
additionally to the CCxE bit. So to not overwrite the latter use |=
instead of = to set the former.
Matthias Schiffer [Mon, 7 Oct 2024 08:23:59 +0000 (10:23 +0200)]
can: m_can: fix missed interrupts with m_can_pci
The interrupt line of PCI devices is interpreted as edge-triggered,
however the interrupt signal of the m_can controller integrated in Intel
Elkhart Lake CPUs appears to be generated level-triggered.
Consider the following sequence of events:
- IR register is read, interrupt X is set
- A new interrupt Y is triggered in the m_can controller
- IR register is written to acknowledge interrupt X. Y remains set in IR
As at no point in this sequence no interrupt flag is set in IR, the
m_can interrupt line will never become deasserted, and no edge will ever
be observed to trigger another run of the ISR. This was observed to
result in the TX queue of the EHL m_can to get stuck under high load,
because frames were queued to the hardware in m_can_start_xmit(), but
m_can_finish_tx() was never run to account for their successful
transmission.
On an Elkhart Lake based board with the two CAN interfaces connected to
each other, the following script can reproduce the issue:
ip link set can0 up type can bitrate 1000000
ip link set can1 up type can bitrate 1000000
To fix the issue, repeatedly read and acknowledge interrupts at the
start of the ISR until no interrupt flags are set, so the next incoming
interrupt will also result in an edge on the interrupt line.
While we have received a report that even with this patch, the TX queue
can become stuck under certain (currently unknown) circumstances on the
Elkhart Lake, this patch completely fixes the issue with the above
reproducer, and it is unclear whether the remaining issue has a similar
cause at all.
Matthias Schiffer [Mon, 7 Oct 2024 08:23:58 +0000 (10:23 +0200)]
can: m_can: set init flag earlier in probe
While an m_can controller usually already has the init flag from a
hardware reset, no such reset happens on the integrated m_can_pci of the
Intel Elkhart Lake. If the CAN controller is found in an active state,
m_can_dev_setup() would fail because m_can_niso_supported() calls
m_can_cccr_update_bits(), which refuses to modify any other configuration
bits when CCCR_INIT is not set.
To avoid this issue, set CCCR_INIT before attempting to modify any other
configuration flags.
====================
Support some features for the HIBMCGE driver
In this patch series, The HIBMCGE driver implements some functions
such as dump register, unicast MAC address filtering, debugfs and reset.
====================
Jijie Shao [Mon, 16 Dec 2024 04:05:31 +0000 (12:05 +0800)]
net: hibmcge: Add reset supported in this module
Sometimes, if the port doesn't work, we can try to fix it by resetting it.
This patch supports reset triggered by ethtool or FLR of PCIe, For example:
ethtool --reset eth0 dedicated
echo 1 > /sys/bus/pci/devices/0000\:83\:00.1/reset
We hope that the reset can be performed only when the port is down,
and the port cannot be up during the reset.
Therefore, the entire reset process is protected by the rtnl lock.
After the reset is complete, the hardware registers are restored
to their default values. Therefore, some rebuild operations are
required to rewrite the user configuration to the registers.
Jijie Shao [Mon, 16 Dec 2024 04:05:29 +0000 (12:05 +0800)]
net: hibmcge: Add register dump supported in this module
The dump register is an effective way to analyze problems.
To ensure code flexibility, each register contains the type,
offset, and value information. The ethtool does the pretty print
based on these information.
The driver can dynamically add or delete registers that need to be dumped
in the future because information such as type and offset is contained.
ethtool always can do pretty print.
Jijie Shao [Mon, 16 Dec 2024 04:05:27 +0000 (12:05 +0800)]
net: hibmcge: Add irq_info file to debugfs
the driver requested three interrupts: "tx", "rx", "err".
The err interrupt is a summary interrupt. We distinguish
different errors based on the status register and mask.
With "cat /proc/interrupts | grep hibmcge",
we can't distinguish the detailed cause of the error,
so we added this file to debugfs.
Jakub Kicinski [Wed, 18 Dec 2024 03:51:58 +0000 (19:51 -0800)]
Merge branch 'lan78xx-preparations-for-phylink'
Oleksij Rempel says:
====================
lan78xx: Preparations for PHYlink
This patch set is a third part of the preparatory work for migrating
the lan78xx USB Ethernet driver to the PHYlink framework. During
extensive testing, I observed that resetting the USB adapter can lead to
various read/write errors. While the errors themselves are acceptable,
they generate excessive log messages, resulting in significant log spam.
This set improves error handling to reduce logging noise by addressing
errors directly and returning early when necessary.
====================
Oleksij Rempel [Mon, 16 Dec 2024 12:09:41 +0000 (13:09 +0100)]
net: usb: lan78xx: Improve error handling in WoL operations
Enhance error handling in Wake-on-LAN (WoL) operations:
- Log a warning in `lan78xx_get_wol` if `lan78xx_read_reg` fails.
- Check and handle errors from `device_set_wakeup_enable` and
`phy_ethtool_set_wol` in `lan78xx_set_wol`.
- Ensure proper cleanup with a unified error handling path.
Oleksij Rempel [Mon, 16 Dec 2024 12:09:40 +0000 (13:09 +0100)]
net: usb: lan78xx: remove PHY register access from ethtool get_regs
Remove PHY register handling from `lan78xx_get_regs` and
`lan78xx_get_regs_len`. Since the controller can have different PHYs
attached, the first 32 registers are not universally relevant or the
most interesting. Simplify the implementation to focus on MAC and device
registers.
Oleksij Rempel [Mon, 16 Dec 2024 12:09:39 +0000 (13:09 +0100)]
net: usb: lan78xx: rename phy_mutex to mdiobus_mutex
Rename `phy_mutex` to `mdiobus_mutex` for clarity, as the mutex protects
MDIO bus access rather than PHY-specific operations. Update all
references to ensure consistency.
Oleksij Rempel [Mon, 16 Dec 2024 12:09:38 +0000 (13:09 +0100)]
net: usb: lan78xx: Use action-specific label in lan78xx_mac_reset
Rename the generic `done` label to the action-specific `exit_unlock`
label in `lan78xx_mac_reset`. This improves clarity by indicating the
specific cleanup action (mutex unlock) and aligns with best practices
for error handling and cleanup labels.
Oleksij Rempel [Mon, 16 Dec 2024 12:09:37 +0000 (13:09 +0100)]
net: usb: lan78xx: Use ETIMEDOUT instead of ETIME in lan78xx_stop_hw
Update lan78xx_stop_hw to return -ETIMEDOUT instead of -ETIME when
a timeout occurs. While -ETIME indicates a general timer expiration,
-ETIMEDOUT is more commonly used for signaling operation timeouts and
provides better consistency with standard error handling in the driver.
The -ETIME checks in tx_complete() and rx_complete() are unrelated to
this error handling change. In these functions, the error values are derived
from urb->status, which reflects USB transfer errors. The error value from
lan78xx_stop_hw will be exposed in the following cases:
- usb_driver::suspend
- net_device_ops::ndo_stop (potentially, though currently the return value
is not used).
Oleksij Rempel [Mon, 16 Dec 2024 12:09:36 +0000 (13:09 +0100)]
net: usb: lan78xx: Add error handling to lan78xx_get_regs
Update `lan78xx_get_regs` to handle errors during register and PHY
reads. Log warnings for failed reads and exit the function early if an
error occurs. Drop all previously logged registers to signal
inconsistent readings to the user space. This ensures that invalid data
is not returned to users.
Ido Schimmel [Mon, 16 Dec 2024 13:18:44 +0000 (14:18 +0100)]
mlxsw: Switch to napi_gro_receive()
Benefit from the recent conversion of the driver to NAPI and enable GRO
support through the use of napi_gro_receive(). Pass the NAPI pointer
from the bus driver (mlxsw_pci) to the switch driver (mlxsw_spectrum)
through the skb control block where various packet metadata is already
encoded.
The main motivation is to improve forwarding performance through the use
of GRO fraglist [1]. In my testing, when the forwarding data path is
simple (routing between two ports) there is not much difference in
forwarding performance between GRO disabled and GRO enabled with
fraglist.
The improvement becomes more noticeable as the data path becomes more
complex since it is traversed less times with GRO enabled. For example,
with 10 ingress and 10 egress flower filters with different priorities
on the two ports between which routing is performed, there is an
improvement of about 140% in forwarded bandwidth.
====================
inetpeer: reduce false sharing and atomic operations
After commit 8c2bd38b95f7 ("icmp: change the order of rate limits"),
there is a risk that a host receiving packets from an unique
source targeting closed ports is using a common inet_peer structure
from many cpus.
All these cpus have to acquire/release a refcount and update
the inet_peer timestamp (p->dtime)
Switch to pure RCU to avoid changing the refcount, and update
p->dtime only once per jiffy.
Eric Dumazet [Sun, 15 Dec 2024 17:56:29 +0000 (17:56 +0000)]
inetpeer: do not get a refcount in inet_getpeer()
All inet_getpeer() callers except ip4_frag_init() don't need
to acquire a permanent refcount on the inetpeer.
They can switch to full RCU protection.
Move the refcount_inc_not_zero() into ip4_frag_init(),
so that all the other callers no longer have to
perform a pair of expensive atomic operations on
a possibly contended cache line.
inet_putpeer() no longer needs to be exported.
After this patch, my DUT can receive 8,400,000 UDP packets
per second targeting closed ports, using 50% less cpu cycles
than before.
Also change two calls to l3mdev_master_ifindex() by
l3mdev_master_ifindex_rcu() (Ido ideas)
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
====================
Thomas Weißschuh [Mon, 16 Dec 2024 11:30:11 +0000 (12:30 +0100)]
netxen_nic: constify 'struct bin_attribute'
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Thomas Weißschuh [Mon, 16 Dec 2024 11:30:09 +0000 (12:30 +0100)]
net: phy: ks8995: constify 'struct bin_attribute'
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Thomas Weißschuh [Mon, 16 Dec 2024 11:30:08 +0000 (12:30 +0100)]
net: bridge: constify 'struct bin_attribute'
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Kuniyuki Iwashima [Mon, 16 Dec 2024 11:04:32 +0000 (20:04 +0900)]
rtnetlink: Try the outer netns attribute in rtnl_get_peer_net().
Xiao Liang reported that the cited commit changed netns handling
in newlink() of netkit, veth, and vxcan.
Before the patch, if we don't find a netns attribute in the peer
device attributes, we tried to find another netns attribute in
the outer netlink attributes by passing it to rtnl_link_get_net().
Jakub Kicinski [Sun, 15 Dec 2024 21:29:38 +0000 (13:29 -0800)]
net: page_pool: rename page_pool_is_last_ref()
page_pool_is_last_ref() releases a reference while the name,
to me at least, suggests it just checks if the refcount is 1.
The semantics of the function are the same as those of
atomic_dec_and_test() and refcount_dec_and_test(), so just
use the _and_test() suffix.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://patch.msgid.link/20241215212938.99210-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Chancellor [Thu, 21 Nov 2024 18:22:18 +0000 (11:22 -0700)]
hexagon: Disable constant extender optimization for LLVM prior to 19.1.0
The Hexagon-specific constant extender optimization in LLVM may crash on
Linux kernel code [1], such as fs/bcache/btree_io.c after
commit 32ed4a620c54 ("bcachefs: Btree path tracepoints") in 6.12:
clang: llvm/lib/Target/Hexagon/HexagonConstExtenders.cpp:745: bool (anonymous namespace)::HexagonConstExtenders::ExtRoot::operator<(const HCE::ExtRoot &) const: Assertion `ThisB->getParent() == OtherB->getParent()' failed.
Stack dump:
0. Program arguments: clang --target=hexagon-linux-musl ... fs/bcachefs/btree_io.c
1. <eof> parser at end of file
2. Code generation
3. Running pass 'Function Pass Manager' on module 'fs/bcachefs/btree_io.c'.
4. Running pass 'Hexagon constant-extender optimization' on function '@__btree_node_lock_nopath'
Without assertions enabled, there is just a hang during compilation.
This has been resolved in LLVM main (20.0.0) [2] and backported to LLVM
19.1.0 but the kernel supports LLVM 13.0.1 and newer, so disable the
constant expander optimization using the '-mllvm' option when using a
toolchain that is not fixed.
Joshua Hay [Mon, 25 Nov 2024 23:58:55 +0000 (15:58 -0800)]
idpf: trigger SW interrupt when exiting wb_on_itr mode
There is a race condition between exiting wb_on_itr and completion write
backs. For example, we are in wb_on_itr mode and a Tx completion is
generated by HW, ready to be written back, as we are re-enabling
interrupts:
That tx_completion_wb happens before the vector is fully re-enabled.
Continuing with this example, it is a UDP stream and the
tx_completion_wb is the last one in the flow (there are no rx packets).
Because the HW generated the completion before the interrupt is fully
enabled, the HW will not fire the interrupt once the timer expires and
the write back will not happen. NAPI poll won't be called. We have
indicated we're back in interrupt mode but nothing else will trigger the
interrupt. Therefore, the completion goes unprocessed, triggering a Tx
timeout.
To mitigate this, fire a SW triggered interrupt upon exiting wb_on_itr.
This interrupt will catch the rogue completion and avoid the timeout.
Add logic to set the appropriate bits in the vector's dyn_ctl register.
Joshua Hay [Mon, 25 Nov 2024 23:58:54 +0000 (15:58 -0800)]
idpf: add support for SW triggered interrupts
SW triggered interrupts are guaranteed to fire after their timer
expires, unlike Tx and Rx interrupts which will only fire after the
timer expires _and_ a descriptor write back is available to be processed
by the driver.
Add the necessary fields, defines, and initializations to enable a SW
triggered interrupt in the vector's dyn_ctl register.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ben Shelton [Mon, 16 Dec 2024 14:15:35 +0000 (15:15 +0100)]
ice: Add MDD logging via devlink health
Add a devlink health reporter for MDD events. The 'dump' handler will
return the information captured in each call to ice_handle_mdd_event().
A device reset (CORER/PFR) will put the reporter back in healthy state.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com> Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Przemek Kitszel [Mon, 16 Dec 2024 14:15:34 +0000 (15:15 +0100)]
ice: add Tx hang devlink health reporter
Add Tx hang devlink health reporter, see struct ice_tx_hang_event to see
what exactly is reported. For now dump descriptors with little metadata
and skb diagnostic information.
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Qu Wenruo [Wed, 4 Dec 2024 03:00:46 +0000 (13:30 +1030)]
btrfs: tree-checker: reject inline extent items with 0 ref count
[BUG]
There is a bug report in the mailing list where btrfs_run_delayed_refs()
failed to drop the ref count for logical 25870311358464 num_bytes 2113536.
[CAUSE]
There is no concrete evidence yet, but considering 0 -> 1 is also a
single bit flipped, it's possible that hardware memory bitflip is
involved, causing the on-disk extent tree to be corrupted.
[FIX]
To prevent us reading such corrupted extent item, or writing such
damaged extent item back to disk, enhance the handling of
BTRFS_EXTENT_DATA_REF_KEY and BTRFS_SHARED_DATA_REF_KEY keys for both
inlined and key items, to detect such 0 ref count and reject them.
CC: stable@vger.kernel.org # 5.4+ Link: https://lore.kernel.org/linux-btrfs/7c69dd49-c346-4806-86e7-e6f863a66f48@app.fastmail.com/ Reported-by: Frankie Fisher <frankie@terrorise.me.uk> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Mon, 4 Nov 2024 06:26:33 +0000 (07:26 +0100)]
btrfs: split bios to the fs sector size boundary
Btrfs like other file systems can't really deal with I/O not aligned to
it's internal block size (which strangely is called sector size in
btrfs, for historical reasons), but the block layer split helper doesn't
even know about that.
Round down the split boundary so that all I/Os are aligned.
Fixes: d5e4377d5051 ("btrfs: split zone append bios in btrfs_submit_bio") CC: stable@vger.kernel.org # 6.12 Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Mon, 4 Nov 2024 06:26:32 +0000 (07:26 +0100)]
btrfs: use bio_is_zone_append() in the completion handler
Otherwise it won't catch bios turned into regular writes by the block
level zone write plugging. The additional test it adds is for emulated
zone append.
Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation") CC: stable@vger.kernel.org # 6.12 Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 13 Nov 2024 16:11:55 +0000 (11:11 -0500)]
btrfs: fix improper generation check in snapshot delete
We have been using the following check
if (generation <= root->root_key.offset)
to make decisions about whether or not to visit a node during snapshot
delete. This is because for normal subvolumes this is set to 0, and for
snapshots it's set to the creation generation. The idea being that if
the generation of the node is less than or equal to our creation
generation then we don't need to visit that node, because it doesn't
belong to us, we can simply drop our reference and move on.
However reloc roots don't have their generation stored in
root->root_key.offset, instead that is the objectid of their
corresponding fs root. This means we can incorrectly not walk into
nodes that need to be dropped when deleting a reloc root.
There are a variety of consequences to making the wrong choice in two
distinct areas.
visit_node_for_delete()
1. False positive. We think we are newer than the block when we really
aren't. We don't visit the node and drop our reference to the node
and carry on. This would result in leaked space.
2. False negative. We do decide to walk down into a block that we
should have just dropped our reference to. However this means that
the child node will have refs > 1, so we will switch to
UPDATE_BACKREF, and then the subsequent walk_down_proc() will notice
that btrfs_header_owner(node) != root->root_key.objectid and it'll
break out of the loop, and then walk_up_proc() will drop our reference,
so this appears to be ok.
do_walk_down()
1. False positive. We are in UPDATE_BACKREF and incorrectly decide that
we are done and don't need to update the backref for our lower nodes.
This is another case that simply won't happen with relocation, as we
only have to do UPDATE_BACKREF if the node below us was shared and
didn't have FULL_BACKREF set, and since we don't own that node
because we're a reloc root we actually won't end up in this case.
2. False negative. Again this is tricky because as described above, we
simply wouldn't be here from relocation, because we don't own any of
the nodes because we never set btrfs_header_owner() to the reloc root
objectid, and we always use FULL_BACKREF, we never actually need to
set FULL_BACKREF on any children.
Having spent a lot of time stressing relocation/snapshot delete recently
I've not seen this pop in practice. But this is objectively incorrect,
so fix this to get the correct starting generation based on the root
we're dropping to keep me from thinking there's a problem here.
CC: stable@vger.kernel.org Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Przemek Kitszel [Mon, 16 Dec 2024 14:15:33 +0000 (15:15 +0100)]
ice: rename devlink_port.[ch] to port.[ch]
Drop "devlink_" prefix from files that sit in devlink/.
I'm going to add more files there, and repeating "devlink" does not feel
good. This is also the scheme used in most other places, most notably the
devlink core files are named like that.
devlink.[ch] stays as is.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mateusz Polchlopek [Mon, 16 Dec 2024 14:15:32 +0000 (15:15 +0100)]
devlink: add devlink_fmsg_dump_skb() function
Add devlink_fmsg_dump_skb() function that adds some diagnostic
information about skb (like length, pkt type, MAC, etc) to devlink
fmsg mechanism using bunch of devlink_fmsg_put() function calls.
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Tue, 17 Dec 2024 17:14:31 +0000 (09:14 -0800)]
Merge tag 'ftrace-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
- Always try to initialize the idle functions when graph tracer starts
A bug was found that when a CPU is offline when graph tracing starts
and then comes online, that CPU is not traced. The fix to that was to
move the initialization of the idle shadow stack over to the hot plug
online logic, which also handle onlined CPUs. The issue was that it
removed the initialization of the shadow stack when graph tracing
starts, but the callbacks to the hot plug logic do nothing if graph
tracing isn't currently running. Although that fix fixed the onlining
of a CPU during tracing, it broke the CPUs that were already online.
- Have microblaze not try to get the "true parent" in function tracing
If function tracing and graph tracing are both enabled at the same
time the parent of the functions traced by the function tracer may
sometimes be the graph tracing trampoline. The graph tracing hijacks
the return pointer of the function to trace it, but that can
interfere with the function tracing parent output.
This was fixed by using the ftrace_graph_ret_addr() function passing
in the kernel stack pointer using the ftrace_regs_get_stack_pointer()
function. But Al Viro reported that Microblaze does not implement the
kernel_stack_pointer(regs) helper function that
ftrace_regs_get_stack_pointer() uses and fails to compile when
function graph tracing is enabled.
It was first thought that this was a microblaze issue, but the real
cause is that this only works when an architecture implements
HAVE_DYNAMIC_FTRACE_WITH_ARGS, as a requirement for that config is to
have ftrace always pass a valid ftrace_regs to the callbacks. That
also means that the architecture supports
ftrace_regs_get_stack_pointer()
Microblaze does not set HAVE_DYNAMIC_FTRACE_WITH_ARGS nor does it
implement ftrace_regs_get_stack_pointer() which caused it to fail to
build. Only implement the "true parent" logic if an architecture has
that config set"
* tag 'ftrace-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Do not find "true_parent" if HAVE_DYNAMIC_FTRACE_WITH_ARGS is not set
fgraph: Still initialize idle shadow stacks when starting
projects / users / jedix / linux-maple.git / log