We should always do a read of current value of XGMAC_VLAN_TAG instead of
directly overwriting the register value.
Fixes: 3cd1cfcba26e2 ("net: stmmac: Implement VLAN Hash Filtering in XGMAC") Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It should always do a read of current value of GMAC_VLAN_TAG instead of
directly overwriting the register value.
Fixes: c1be0022df0d ("net: stmmac: Add VLAN HASH filtering support in GMAC4+") Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GEM_MAX_TX_LEN currently resolves to 0x3FF8 for any IP version supporting
TSO with full 14bits of length field in payload descriptor. But an IP
errata causes false amba_error (bit 6 of ISR) when length in payload
descriptors is specified above 16387. The error occurs because the DMA
falsely concludes that there is not enough space in SRAM for incoming
payload. These errors were observed continuously under stress of large
packets using iperf on a version where SRAM was 16K for each queue. This
errata will be documented shortly and affects all versions since TSO
functionality was added. Hence limit the max length to 0x3FC0 (rounded).
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IP TSO implementation does NOT require the length to be a
multiple of 8. That is only a requirement for UFO as per IP
documentation. Hence, exit macb_features_check function in the
beginning if the protocol is not UDP. Only when it is UDP,
proceed further to the alignment checks. Update comments to
reflect the same. Also remove dead code checking for protocol
TCP when calculating header length.
Fixes: 1629dd4f763c ("cadence: Add LSO support.") Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx,
however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function
nullifies sa_ctx pointer without freeing the memory allocated,
hence the memory leak.
The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used
with negative negation as zero value indicates success but it
used as failure return value instead.
Fix by remove the unary not negation operator.
Fixes: 05564d0ae075 ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a number of suspend and resume cycles, it is possible for the RBUF
to be stuck in Wake-on-LAN mode, despite the MPD enable bit being
cleared which instructed the RBUF to exit that mode.
Avoid creating that problematic condition by clearing the RX_EN and
TX_EN bits in the UniMAC prior to disable the Magic Packet Detector
logic which is guaranteed to make the RBUF exit Wake-on-LAN mode.
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It forgot to reduce the value of the variable retry in a while loop
in the ethqos_configure() function. It may cause an endless loop and
without timeout.
Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos") Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jakub noticed there is a potential resource leak in
tcindex_set_parms(): when tcindex_filter_result_init() fails
and it jumps to 'errout1' which doesn't release the memory
and resources allocated by tcindex_alloc_perfect_hash().
We should just jump to 'errout_alloc' which calls
tcindex_free_perfect_hash().
Fixes: b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()") Reported-by: Jakub Kicinski <kuba@kernel.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move rx_dropped and rx_errors counters in mvneta_pcpu_stats in order to
avoid possible races updating statistics
Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 7445 switch clocking profiles do not allow us to run the IMP port at
2Gb/sec in a way that it is reliable and consistent. Make sure that the
setting is only applied to the 7278 family.
Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
b53_configure_vlan() is called by the bcm_sf2 driver upon setup and
indirectly through resume as well. During the initial setup, we are
guaranteed that dev->vlan_enabled is false, so there is no change in
behavior, however during suspend, we may have enabled VLANs before, so we
do want to restore that setting.
Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering") Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stop removing modes that are not supported on the system interface
when the connected PHY is capable of rate adaptation. This addresses
an issue with the LS1046ARDB board 10G interface no longer working
with an 1G link partner after autonegotiation support was added
for the Aquantia PHY on board in
commit 09c4c57f7bc4 ("net: phy: aquantia: add support for auto-negotiation configuration")
Before this commit the values advertised by the PHY were not
influenced by the dpaa_eth driver removal of system-side unsupported
modes as the aqr_config_aneg() was basically a no-op. After this
commit, the modes removed by the dpaa_eth driver were no longer
advertised thus autonegotiation with 1G link partners failed.
Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdd41ec21e15 ("devlink: Return right error code in case of errors
for region read") modified the region read code to report errors
properly in unexpected cases.
In the case where the start_offset and ret_offset match, it unilaterally
converted this into an error. This causes an issue for the "dump"
version of the command. In this case, the devlink region dump will
always report an invalid argument:
This occurs because the expected flow for the dump is to return 0 after
there is no further data.
The simplest fix would be to stop converting the error code to -EINVAL
if start_offset == ret_offset. However, avoid unnecessary work by
checking for when start_offset is larger than the region size and
returning 0 upfront.
Fixes: fdd41ec21e15 ("devlink: Return right error code in case of errors for region read") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot managed to send an IPX packet through bond_alb_xmit()
and af_packet and triggered a use-after-free.
First, bond_alb_xmit() was using ipx_hdr() helper to reach
the IPX header, but ipx_hdr() was using the transport offset
instead of the network offset. In the particular syzbot
report transport offset was 0xFFFF
This patch removes ipx_hdr() since it was only (mis)used from bonding.
Then we need to make sure IPv4/IPv6/IPX headers are pulled
in skb->head before dereferencing anything.
BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108
(if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...)
Tony reported a boot regression caused by the recent workaround for systems
which have a disabled (clock gate off) PIT.
On his machine the kernel fails to initialize the PIT because
apic_needs_pit() does not take into account whether the local APIC
interrupt delivery mode will actually allow to setup and use the local
APIC timer. This should be easy to reproduce with acpi=off on the
command line which also disables HPET.
Due to the way the PIT/HPET and APIC setup ordering works (APIC setup can
require working PIT/HPET) the information is not available at the point
where apic_needs_pit() makes this decision.
To address this, split out the interrupt mode selection from
apic_intr_mode_init(), invoke the selection before making the decision
whether PIT is required or not, and add the missing checks into
apic_needs_pit().
Fixes: c8c4076723da ("x86/timer: Skip PIT initialization on modern chipsets") Reported-by: Anthony Buckley <tony.buckley000@gmail.com> Tested-by: Anthony Buckley <tony.buckley000@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Daniel Drake <drake@endlessm.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=206125 Link: https://lore.kernel.org/r/87sgk6tmk2.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This logic is re-used for parsing a set of online CPUs. Having it as an
isolated piece of code working with input string makes it conveninent to test
this logic as well. While refactoring, also improve the robustness of original
implementation.
Though the second half of trampoline page is unused a task could be
preempted in the middle of the first half of trampoline and two
updates to trampoline would change the code from underneath the
preempted task. Hence wait for tasks to voluntarily schedule or go
to userspace. Add similar wait before freeing the trampoline.
Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/bpf/20200121032231.3292185-1-ast@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f4d41ad84433 ("mfd: ab8500: Example using new OF_MFD_CELL MACRO")
has a typo error renaming "ab8500-clk" to "abx500-clk"
with the result att ALSA SoC audio broke as the clock
driver was not probing anymore. Fixed it up.
Fixes: f4d41ad84433 ("mfd: ab8500: Example using new OF_MFD_CELL MACRO") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When RTC is used in 24H mode (and it is by this driver) the maximum
hour value is 24 in BCD. This occupies bits [5:0] - which means
correct mask for HOUR register is 0x3f not 0x1f. Fix the mask
Fixes: 32a4a4ebf768 ("rtc: bd70528: Initial support for ROHM bd70528 RTC") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The watchdog driver compatible is "dlg,da9062-watchdog" and not
"dlg,da9062-wdt". Therefore the mfd-core can't populate the of_node and
fwnode. As result the watchdog driver can't parse the devicetree.
Fixes: 9b40b030c4ad ("mfd: da9062: Supply core driver") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Comparing the voltage of VDDA and VDDIO to determine whether or not to
enable VDDC manual override is insufficient. This is a problem in case
the VDDA is supplied from different regulator than VDDIO, while both
report the same voltage to the regulator framework. In that case where
VDDA and VDDIO is supplied by different regulators, the VDDC manual
override must not be applied.
Fixes: b6319b061ba2 ("ASoC: sgtl5000: Fix charge pump source assignment") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Mark Brown <broonie@kernel.org> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Link: https://lore.kernel.org/r/20191220164450.1395038-2-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add regulator_is_equal() helper to compare whether two regulators are
the same. This is useful for checking whether two separate regulators
in a driver are actually the same supply.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Mark Brown <broonie@kernel.org> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Link: https://lore.kernel.org/r/20191220164450.1395038-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
set_seen() sets the bit corresponding to the PEB number in the bitmap,
so when self_check_seen() wants to find PEBs that haven't been seen we
have to print the PEBs that have their bit cleared, not the ones which
have it set.
Fixes: 5d71afb00840 ("ubi: Use bitmaps in Fastmap self-check code") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We forget to put the inode and unmount the kernfs used for compaction.
Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Liang Li <liang.z.li@intel.com> Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200205163402.42627-3-david@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When unloading the driver while hinting is in progress, we will not
release the free page blocks back to MM, resulting in a memory leak.
Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Liang Li <liang.z.li@intel.com> Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200205163402.42627-2-david@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nfsd4_blocked_lock->nbl_time timestamp is recorded in jiffies,
but then compared to a CLOCK_REALTIME timestamp later on, which makes
no sense.
For consistency with the other timestamps, change this to use a time_t.
This is a change in behavior, which may cause regressions, but the
current code is not sensible. On a system with CONFIG_HZ=1000,
the 'time_after((unsigned long)nbl->nbl_time, (unsigned long)cutoff))'
check is false for roughly the first 18 days of uptime and then true
for the next 49 days.
Fixes: 7919d0a27f1e ("nfsd: add a LRU list for blocked locks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nfsd4_cb_layout_done() function takes a 'time_t' value,
multiplied by NSEC_PER_SEC*2 to get a nanosecond value.
This works fine on 64-bit architectures, but on 32-bit, any
value over 1 second results in a signed integer overflow
with unexpected results.
Cast one input to a 64-bit type in order to produce the
same result that we have on 64-bit architectures, regarless
of the type of nfsd4_lease.
Fixes: 6b9b21073d3b ("nfsd: give up on CB_LAYOUTRECALLs after two lease periods") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears that commit 8c7128c4cf4e ("staging: align to fix warnings of
line over 80 characters") do slightly more than what is explained in
commit log.
Especially, it changes the output of the file rx_stats from debugfs.
From some point of view, this file can be considered as a part of the
API. Any change on it should be clearly announced.
Since the change introduced does not seems to have any justification,
revert it.
As VMAs for a given range might not be available as part of the
registration phase in ODP.
ib_init_umem_odp() considered the expected page shift value that was
previously set and initializes its internals accordingly.
If memory isn't backed by physical contiguous pages aligned to a hugepage
boundary an error will be set as part of the page fault flow and come back
to the user as some failed RDMA operation.
Fixes: 0008b84ea9af ("IB/umem: Add support to huge ODP") Link: https://lore.kernel.org/r/20191222124649.52300-4-leon@kernel.org Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nr_pages argument of get_user_pages_remote() should always be in terms
of the system page size, not the MR page size. Use PAGE_SIZE instead of
umem_odp->page_shift.
Commit b0ffeb537f3a ("IB/mlx5: Fix iteration overrun in GSI qps") changed
the way outstanding WRs are tracked for the GSI QP. But the fix did not
cover the case when a call to ib_post_send() fails and updates index to
track outstanding.
Since the prior commmit outstanding_pi should not be bounded otherwise the
loop generate_completions() will fail.
Fixes: b0ffeb537f3a ("IB/mlx5: Fix iteration overrun in GSI qps") Link: https://lore.kernel.org/r/1576195889-23527-1-git-send-email-psajeepa@purestorage.com Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
../drivers/net/ethernet/dec/tulip/uli526x.c:1812:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
switch (mode) {
^
../drivers/net/ethernet/dec/tulip/uli526x.c:1809:2: note: previous
statement is here
if (cr6set)
^
1 warning generated.
../drivers/net/ethernet/dec/tulip/dmfe.c:2217:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
switch(mode) {
^
../drivers/net/ethernet/dec/tulip/dmfe.c:2214:2: note: previous
statement is here
if (cr6set)
^
1 warning generated.
This warning occurs because there is a space before the tab on these
lines. Remove them so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
While we are here, adjust the default block in dmfe_init_module to have
a proper break between the label and assignment and add a space between
the switch and opening parentheses to avoid a checkpatch warning.
Fixes: e1c3e5014040 ("[PATCH] initialisation cleanup for ULI526x-net-driver") Link: https://github.com/ClangBuiltLinux/linux/issues/795 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
../drivers/net/ethernet/smsc/smc911x.c:939:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
if (!lp->ctl_rfduplx)
^
../drivers/net/ethernet/smsc/smc911x.c:936:2: note: previous statement
is here
if (lp->ctl_rspeed != 100)
^
1 warning generated.
This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
Fixes: 0a0c72c9118c ("[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips") Link: https://github.com/ClangBuiltLinux/linux/issues/796 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
../drivers/net/ppp/ppp_async.c:877:6: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
ap->rpkt = skb;
^
../drivers/net/ppp/ppp_async.c:875:5: note: previous statement is here
if (!skb)
^
1 warning generated.
This warning occurs because there is a space before the tab on this
line. Clean up this entire block's indentation so that it is consistent
with the Linux kernel coding style and clang no longer warns.
Fixes: 6722e78c9005 ("[PPP]: handle misaligned accesses") Link: https://github.com/ClangBuiltLinux/linux/issues/800 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
../drivers/nfc/pn544/pn544.c:696:4: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
^
../drivers/nfc/pn544/pn544.c:692:3: note: previous statement is here
if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
^
1 warning generated.
This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
Fixes: da052850b911 ("NFC: Add pn544 presence check for different targets") Link: https://github.com/ClangBuiltLinux/linux/issues/814 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
../drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c:124:3: warning:
misleading indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
mdp4_crtc_set_config(encoder->crtc,
^
../drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c:121:2: note:
previous statement is here
if (mdp4_dsi_encoder->enabled)
^
This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
Fixes: 776638e73a19 ("drm/msm/dsi: Add a mdp4 encoder for DSI") Link: https://github.com/ClangBuiltLinux/linux/issues/792 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
../arch/powerpc/boot/4xx.c:231:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
val = SDRAM0_READ(DDR0_42);
^
../arch/powerpc/boot/4xx.c:227:2: note: previous statement is here
else
^
This is because there is a space at the beginning of this line; remove
it so that the indentation is consistent according to the Linux kernel
coding style and clang no longer warns.
../fs/ext2/super.c:1076:3: warning: misleading indentation; statement is
not part of the previous 'if' [-Wmisleading-indentation]
sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
^
../fs/ext2/super.c:1074:2: note: previous statement is here
if (EXT2_BLOCKS_PER_GROUP(sb) == 0)
^
1 warning generated.
This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:83:4: warning:
misleading indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
^
../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:80:3: note: previous
statement is here
if (readl_relaxed(addr) & mask)
^
1 warning generated.
This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
Fixes: 1de990d8a169 ("phy: qcom: Add driver for QCOM APQ8064 SATA PHY") Link: https://github.com/ClangBuiltLinux/linux/issues/816 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mt25q family is different from n25q family of devices, even though manf
ID and device IDs are same. mt25q flash has bit 6 set in 5th byte of
READ ID response which can be used to distinguish it from n25q variant.
mt25q flashes support stateless 4 Byte addressing opcodes where as n25q
flashes don't. Therefore, have two separate entries for mt25qu512a and
n25q512a.
In the v5.4 merge window, a cleanup patch from Al Viro conflicted
with my rework of the compat handling for sg.c read(). Linus Torvalds
did a correct merge but pointed out that the resulting code is still
unsatisfactory.
I later noticed that the sg_new_read() function still gets the compat
mode wrong, when the 'count' argument is large enough to pass a
compat_sg_io_hdr object, but not a nativ sg_io_hdr.
To address both of these, move the definition of compat_sg_io_hdr
into a scsi/sg.h to make it visible to sg.c and rewrite the logic
for reading req_pack_id as well as the size check to a simpler
version that gets the expected results.
bkops level should be rechecked upon receiving an exception. Currently the
level is being cached and never updated.
Update bkops each time the level is checked. Also do not use the cached
bkops level value if it is disabled and then enabled.
Fixes: afdfff59a0e0 (scsi: ufs: handle non spec compliant bkops behaviour by device) Link: https://lore.kernel.org/r/1574751214-8321-2-git-send-email-cang@qti.qualcomm.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
../drivers/scsi/qla4xxx/ql4_os.c:4148:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
if (ha->fw_dump)
^
../drivers/scsi/qla4xxx/ql4_os.c:4144:2: note: previous statement is
here
if (ha->queues)
^
1 warning generated.
This warning occurs because there is a space after the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Fixes: 068237c87c64 ("[SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure") Link: https://github.com/ClangBuiltLinux/linux/issues/819 Link: https://lore.kernel.org/r/20191218015252.20890-1-natechancellor@gmail.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
../drivers/scsi/csiostor/csio_scsi.c:1386:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
csio_lnodes_exit(hw, 1);
^
../drivers/scsi/csiostor/csio_scsi.c:1382:2: note: previous statement is
here
if (*buf != '1')
^
1 warning generated.
This warning occurs because there is a space after the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Since qla82xx_get_fw_size() returns a number in CPU-endian format, change
its return type from __le32 into u32. This patch does not change any
functionality.
Fixes: 9c2b297572bf ("[SCSI] qla2xxx: Support for loading Unified ROM Image (URI) format firmware file.") Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Link: https://lore.kernel.org/r/20191219004905.39586-1-bvanassche@acm.org Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On TODDR sm1, the fifo threshold register field is slightly different
compared to the other SoCs. This leads to the fifo A being flushed to
memory every 8kB. If the period is smaller than that, several periods
are pushed to memory and notified at once. This is not ideal.
Fix the register field update. With this, the fifos are flushed every
128B. We could still do better, like adapt the threshold depending on
the period size, but at least it consistent across the different
SoC/fifos
CONFIG_VIRTUALIZATION may not be enabled for memory encrypted guests. If
disabled, decrypted per-CPU variables may end up sharing the same page
with variables that should be left encrypted.
Always separate per-CPU variables that should be decrypted into their own
page anytime memory encryption can be enabled in the guest rather than
rely on any other config option that may not be enabled.
fuse_direct_io() can end up advancing the iterator by more than the amount
of data read or written. This case is handled by the generic code if going
through ->direct_IO(), but not in the FOPEN_DIRECT_IO case.
Fix by reverting the extra bytes from the iterator in case of error or a
short count.
To test: install lxcfs, then the following testcase
int fd = open("/var/lib/lxcfs/proc/uptime", O_RDONLY);
sendfile(1, fd, NULL, 16777216);
sendfile(1, fd, NULL, 16777216);
will spew WARN_ON() in iov_iter_pipe().
Reported-by: Peter Geis <pgwipeout@gmail.com> Reported-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: 3c3db095b68c ("fuse: use iov_iter based generic splice helpers") Cc: <stable@vger.kernel.org> # v5.1 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VQs without a name specified are not valid; they are skipped in the
later loop that assigns MSI-X vectors to queues, but the per_vq_vectors
loop above that counts the required number of vectors previously still
counted any queue with a non-NULL callback as needing a vector.
Add a check to the per_vq_vectors loop so that vectors with no name are
not counted to make the two loops consistent. This prevents
over-counting unnecessary vectors (e.g. for features which were not
negotiated with the device).
Cc: stable@vger.kernel.org Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Daniel Verkamp <dverkamp@chromium.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Wang, Wei W <wei.w.wang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure that elements of the callbacks array that correspond to
unavailable features are set to NULL; previously, they would be left
uninitialized.
Since the corresponding names array elements were explicitly set to
NULL, the uninitialized callback pointers would not actually be
dereferenced; however, the uninitialized callbacks elements would still
be read in vp_find_vqs_msix() and used to calculate the number of MSI-X
vectors required.
Cc: stable@vger.kernel.org Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Daniel Verkamp <dverkamp@chromium.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disabling a display on MST can potentially happen after the entire MST
topology has been removed, which means that we can't communicate with
the topology at all in this scenario. Likewise, this also means that we
can't properly update payloads on the topology and as such, it's a good
idea to ignore payload update failures when disabling displays.
Currently, amdgpu makes the mistake of halting the payload update
process when any payload update failures occur, resulting in leaving
DC's local copies of the payload tables out of date.
This ends up causing problems with hotplugging MST topologies, and
causes modesets on the second hotplug to fail like so:
Note as well, I have only been able to reproduce this on setups with 2
MST displays.
Changes since v1:
* Don't return false when part 1 or part 2 of updating the payloads
fails, we don't want to abort at any step of the process even if
things fail
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This partially reverts the DMA API support that was recently merged
because it was causing performance regressions on older Tegra devices.
Unfortunately, the cache maintenance performed by dma_map_sg() and
dma_unmap_sg() causes performance to drop by a factor of 10.
The right solution for this would be to cache mappings for buffers per
consumer device, but that's a bit involved. Instead, we simply revert to
the old behaviour of sharing IOVA mappings when we know that devices can
do so (i.e. they share the same IOMMU domain).
Older Tegra devices only allow addressing 32 bits of memory, so whether
or not the host1x is attached to an IOMMU doesn't matter. host1x IOMMU
attachment is only needed on devices that can address memory beyond the
32-bit boundary and where the host1x doesn't support the wide GATHER
opcode that allows it to access buffers at higher addresses.
For a little over a year, U-Boot on Tegra124 has configured the flow
controller to perform automatic RAM re-repair on off->on power
transitions of the CPU rail[1]. This is mandatory for correct operation
of Tegra124. However, RAM re-repair relies on certain clocks, which the
kernel must enable and leave running. The fuse clock is one of those
clocks. Mark this clock as critical so that LP1 power mode (system
suspend) operates correctly.
Architectures for which we have hardware walkers of Linux page table
should flush TLB on mmu gather batch allocation failures and batch flush.
Some architectures like POWER supports multiple translation modes (hash
and radix) and in the case of POWER only radix translation mode needs the
above TLBI. This is because for hash translation mode kernel wants to
avoid this extra flush since there are no hardware walkers of linux page
table. With radix translation, the hardware also walks linux page table
and with that, kernel needs to make sure to TLB invalidate page walk cache
before page table pages are freed.
More details in commit d86564a2f085 ("mm/tlb, x86/mm: Support invalidating
TLB caches for RCU_TABLE_FREE")
The changes to sparc are to make sure we keep the old behavior since we
are now removing HAVE_RCU_TABLE_NO_INVALIDATE. The default value for
tlb_needs_table_invalidate is to always force an invalidate and sparc can
avoid the table invalidate. Hence we define tlb_needs_table_invalidate to
false for sparc architecture.
vdd_apc is the regulator that supplies the main CPU cluster.
At sudden CPU load changes, we have noticed invalid page faults on
addresses with all bits shifted, as well as on addresses with individual
bits flipped.
By putting the vdd_apc regulator in high power mode, the voltage drops
during sudden load changes will be less severe, and we have not been able
to reproduce the invalid page faults with the regulator in this mode.
Patch series "mm: fix max_pfn not falling on section boundary", v2.
Playing with different memory sizes for a x86-64 guest, I discovered that
some memmaps (highest section if max_mem does not fall on the section
boundary) are marked as being valid and online, but contain garbage. We
have to properly initialize these memmaps.
Looking at /proc/kpageflags and friends, I found some more issues,
partially related to this.
This patch (of 3):
If max_pfn is not aligned to a section boundary, we can easily run into
BUGs. This can e.g., be triggered on x86-64 under QEMU by specifying a
memory size that is not a multiple of 128MB (e.g., 4097MB, but also
4160MB). I was told that on real HW, we can easily have this scenario
(esp., one of the main reasons sub-section hotadd of devmem was added).
The issue is, that we have a valid memmap (pfn_valid()) for the whole
section, and the whole section will be marked "online".
pfn_to_online_page() will succeed, but the memmap contains garbage.
E.g., doing a "./page-types -r -a 0x144001" when QEMU was started with "-m
4160M" - (see tools/vm/page-types.c):
This patch fixes that by at least zero-ing out that memmap (so e.g.,
page_to_pfn() will not crash). Commit 907ec5fca3dc ("mm: zero remaining
unavailable struct pages") tried to fix a similar issue, but forgot to
consider this special case.
After this patch, there are still problems to solve. E.g., not all of
these pages falling into a memory hole will actually get initialized later
and set PageReserved - they are only zeroed out - but at least the
immediate crashes are gone. A follow-up patch will take care of this.
Link: http://lkml.kernel.org/r/20191211163201.17179-2-david@redhat.com Fixes: f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") Signed-off-by: David Hildenbrand <david@redhat.com> Tested-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Bob Picco <bob.picco@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: <stable@vger.kernel.org> [4.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This regression problem was introduced by commit e74540b28556 ("ocfs2:
protect extent tree in ocfs2_prepare_inode_for_write()").
Link: http://lkml.kernel.org/r/20200121050153.13290-1-ghe@suse.com Fixes: e74540b28556 ("ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()"). Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw
clock") changed kvmclock to use tkr_raw instead of tkr_mono. However,
the default kvmclock_offset for the VM was still based on the monotonic
clock and, if the raw clock drifted enough from the monotonic clock,
this could cause a negative system_time to be written to the guest's
struct pvclock. RHEL5 does not like it and (if it boots fast enough to
observe a negative time value) it hangs.
There is another thing to be careful about: getboottime64 returns the
host boot time with tkr_mono frequency, and subtracting the tkr_raw-based
kvmclock value will cause the wallclock to be off if tkr_raw drifts
from tkr_mono. To avoid this, compute the wallclock delta from the
current time instead of being clever and using getboottime64.
Fixes: 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") Cc: stable@vger.kernel.org Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We will need a copy of tk->offs_boot in the next patch. Store it and
cleanup the struct: instead of storing tk->tkr_xxx.base with the tk->offs_boot
included, store the raw value in struct pvclock_clock and sum it in
do_monotonic_raw and do_realtime. tk->tkr_xxx.xtime_nsec also moves
to struct pvclock_clock.
While at it, fix a (usually harmless) typo in do_monotonic_raw, which
was using gtod->clock.shift instead of gtod->raw_clock.shift.
Fixes: 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") Cc: stable@vger.kernel.org Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial CPU reset clobbers the userspace fpc and the store status
ioctl clobbers the guest acrs + fpr. As these calls are only done via
ioctl (and not via vcpu_run), no CPU context is loaded, so we can (and
must) act directly on the sync regs, not on the thread context.
Cc: stable@kernel.org Fixes: e1788bb995be ("KVM: s390: handle floating point registers in the run ioctl not in vcpu_put/load") Fixes: 31d8b8d41a7e ("KVM: s390: handle access registers in the run ioctl not in vcpu_put/load") Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20200131100205.74720-2-frankja@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reload the current thread's FPU state, which contains the guest's FPU
state, to the CPU registers if necessary during vcpu_enter_guest().
TIF_NEED_FPU_LOAD can be set any time control is transferred out of KVM,
e.g. if I/O is triggered during a KVM call to get_user_pages() or if a
softirq occurs while KVM is scheduled in.
Moving the handling of TIF_NEED_FPU_LOAD from vcpu_enter_guest() to
kvm_arch_vcpu_load(), effectively kvm_sched_in(), papered over a bug
where kvm_put_guest_fpu() failed to account for TIF_NEED_FPU_LOAD. The
easiest way to the kvm_put_guest_fpu() bug was to run with involuntary
preemption enable, thus handling TIF_NEED_FPU_LOAD during kvm_sched_in()
made the bug go away. But, removing the handling in vcpu_enter_guest()
exposed KVM to the rare case of a softirq triggering kernel_fpu_begin()
between vcpu_load() and vcpu_enter_guest().
Now that kvm_{load,put}_guest_fpu() correctly handle TIF_NEED_FPU_LOAD,
revert the commit to both restore the vcpu_enter_guest() behavior and
eliminate the superfluous switch_fpu_return() in kvm_arch_vcpu_load().
Note, leaving the handling in kvm_arch_vcpu_load() isn't wrong per se,
but it is unnecessary, and most critically, makes it extremely difficult
to find bugs such as the kvm_put_guest_fpu() issue due to shrinking the
window where a softirq can corrupt state.
A sample trace triggered by warning if TIF_NEED_FPU_LOAD is set while
vcpu state is loaded:
Lock the FPU regs and reload the current thread's FPU state, which holds
the guest's FPU state, to the CPU registers if necessary prior to
accessing guest FPU state as part of emulation. kernel_fpu_begin() can
be called from softirq context, therefore KVM must ensure softirqs are
disabled (locking the FPU regs disables softirqs) when touching CPU FPU
state.
Note, for all intents and purposes this reverts commit 6ab0b9feb82a7
("x86,kvm: remove KVM emulator get_fpu / put_fpu"), but at the time it
was applied, removing get/put_fpu() was correct. The re-introduction
of {get,put}_fpu() is necessitated by the deferring of FPU state load.
Fixes: 5f409e20b7945 ("x86/fpu: Defer FPU state load until return to userspace") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Handle TIF_NEED_FPU_LOAD similar to how fpu__copy() handles the flag
when duplicating FPU state to a new task struct. TIF_NEED_FPU_LOAD can
be set any time control is transferred out of KVM, be it voluntarily,
e.g. if I/O is triggered during a KVM call to get_user_pages, or
involuntarily, e.g. if softirq runs after an IRQ occurs. Therefore,
KVM must account for TIF_NEED_FPU_LOAD whenever it is (potentially)
accessing CPU FPU state.
Fixes: 5f409e20b7945 ("x86/fpu: Defer FPU state load until return to userspace") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SPTE_MMIO_MASK overlaps with the bits used to track MMIO
generation number. A high enough generation number would overwrite the
SPTE_SPECIAL_MASK region and cause the MMIO SPTE to be misinterpreted.
Likewise, setting bits 52 and 53 would also cause an incorrect generation
number to be read from the PTE, though this was partially mitigated by the
(useless if it weren't for the bug) removal of SPTE_SPECIAL_MASK from
the spte in get_mmio_spte_generation. Drop that removal, and replace
it with a compile-time assertion.
Fixes: 6eeb4ef049e7 ("KVM: x86: assign two bits to track SPTE kinds") Reported-by: Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Free the vCPU's wbinvd_dirty_mask if vCPU creation fails after
kvm_arch_vcpu_init(), e.g. when installing the vCPU's file descriptor.
Do the freeing by calling kvm_arch_vcpu_free() instead of open coding
the freeing. This adds a likely superfluous, but ultimately harmless,
call to kvmclock_reset(), which only clears vcpu->arch.pv_time_enabled.
Using kvm_arch_vcpu_free() allows for additional cleanup in the future.
Fixes: f5f48ee15c2ee ("KVM: VMX: Execute WBINVD to keep data consistency with assigned devices") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calculate the host-reserved cr4 bits at runtime based on the system's
capabilities (using logic similar to __do_cpuid_func()), and use the
dynamically generated mask for the reserved bit check in kvm_set_cr4()
instead using of the static CR4_RESERVED_BITS define. This prevents
userspace from "enabling" features in cr4 that are not supported by the
system, e.g. by ignoring KVM_GET_SUPPORTED_CPUID and specifying a bogus
CPUID for the vCPU.
Allowing userspace to set unsupported bits in cr4 can lead to a variety
of undesirable behavior, e.g. failed VM-Enter, and in general increases
KVM's attack surface. A crafty userspace can even abuse CR4.LA57 to
induce an unchecked #GP on a WRMSR.
leads to a #GP when writing KERNEL_GS_BASE into hardware:
unchecked MSR access error: WRMSR to 0xc0000102 (tried to write 0x0004000000000000)
at rIP: 0xffffffffa00f239a (vmx_prepare_switch_to_guest+0x10a/0x1d0 [kvm_intel])
Call Trace:
kvm_arch_vcpu_ioctl_run+0x671/0x1c70 [kvm]
kvm_vcpu_ioctl+0x36b/0x5d0 [kvm]
do_vfs_ioctl+0xa1/0x620
ksys_ioctl+0x66/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4c/0x170
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fc08133bf47
Note, the above sequence fails VM-Enter due to invalid guest state.
Userspace can allow VM-Enter to succeed (after the WRMSR #GP) by adding
a KVM_SET_SREGS w/ CR4.LA57=0 after KVM_SET_MSRS, in which case KVM will
technically leak the host's KERNEL_GS_BASE into the guest. But, as
KERNEL_GS_BASE is a userspace-defined value/address, the leak is largely
benign as a malicious userspace would simply be exposing its own data to
the guest, and attacking a benevolent userspace would require multiple
bugs in the userspace VMM.
Cc: stable@vger.kernel.org Cc: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reject writes to RTIT address MSRs if the data being written is a
non-canonical address as the MSRs are subject to canonical checks, e.g.
KVM will trigger an unchecked #GP when loading the values to hardware
during pt_guest_enter().
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert a plethora of parameters and variables in the MMU and page fault
flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM.
Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical
addresses. When TDP is enabled, the fault address is a guest physical
address and thus can be a 64-bit value, even when both KVM and its guest
are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a
64-bit field, not a natural width field.
Using a gva_t for the fault address means KVM will incorrectly drop the
upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to
translate L2 GPAs to L1 GPAs.
Opportunistically rename variables and parameters to better reflect the
dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain
"addr" instead of "vaddr" when the address may be either a GVA or an L2
GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid
a confusing "gpa_t gva" declaration; this also sets the stage for a
future patch to combing nonpaging_page_fault() and tdp_page_fault() with
minimal churn.
Sprinkle in a few comments to document flows where an address is known
to be a GVA and thus can be safely truncated to a 32-bit value. Add
WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help
document such cases and detect bugs.
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we are mapping kvm_steal_time from the guest directly we
don't need keep a copy of it in kvm_vcpu_arch.st. The same is true
for the stime field.
This is part of CVE-2019-3016.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a potential race in record_steal_time() between setting
host-local vcpu->arch.st.steal.preempted to zero (i.e. clearing
KVM_VCPU_PREEMPTED) and propagating this value to the guest with
kvm_write_guest_cached(). Between those two events the guest may
still see KVM_VCPU_PREEMPTED in its copy of kvm_steal_time, set
KVM_VCPU_FLUSH_TLB and assume that hypervisor will do the right
thing. Which it won't.
Instad of copying, we should map kvm_steal_time and that will
guarantee atomicity of accesses to @preempted.
This is part of CVE-2019-3016.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kvm_vcpu_(un)map operates on gfns from any current address space.
In certain cases we want to make sure we are not mapping SMRAM
and for that we can use kvm_(un)map_gfn() that we are introducing
in this patch.
This is part of CVE-2019-3016.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comment in kvm_get_shadow_phys_bits refers to MKTME, but the same is actually
true of SME and SEV. Just use CPUID[0x8000_0008].EAX[7:0] unconditionally if
available, it is simplest and works even if memory is not encrypted.
Cc: stable@vger.kernel.org Reported-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the bogus 64-bit only condition from the check that disables MMIO
spte optimization when the system supports the max PA, i.e. doesn't have
any reserved PA bits. 32-bit KVM always uses PAE paging for the shadow
MMU, and per Intel's SDM:
PAE paging translates 32-bit linear addresses to 52-bit physical
addresses.
The kernel's restrictions on max physical addresses are limits on how
much memory the kernel can reasonably use, not what physical addresses
are supported by hardware.
Current SVM implementation does not have support for handling PKU. Guests
running on a host with future AMD cpus that support the feature will read
garbage from the PKRU register and will hit segmentation faults on boot as
memory is getting marked as protected that should not be. Ensure that cpuid
from SVM does not advertise the feature.
Signed-off-by: John Allen <john.allen@amd.com> Cc: stable@vger.kernel.org Fixes: 0556cbdc2fbc ("x86/pkeys: Don't check if PKRU is zero before writing it") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Explicitly free the shared page if kvmppc_mmu_init() fails during
kvmppc_core_vcpu_create(), as the page is freed only in
kvmppc_core_vcpu_free(), which is not reached via kvm_vcpu_uninit().
Fixes: 96bc451a15329 ("KVM: PPC: Introduce shared page") Cc: stable@vger.kernel.org Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike most state managed by XSAVE, MPX is initialized to zero on INIT.
Because INITs are usually recognized in the context of a VCPU_RUN call,
kvm_vcpu_reset() puts the guest's FPU so that the FPU state is resident
in memory, zeros the MPX state, and reloads FPU state to hardware. But,
in the unlikely event that an INIT is recognized during
kvm_arch_vcpu_ioctl_get_mpstate() via kvm_apic_accept_events(),
kvm_vcpu_reset() will call kvm_put_guest_fpu() without a preceding
kvm_load_guest_fpu() and corrupt the guest's FPU state (and possibly
userspace's FPU state as well).
Given that MPX is being removed from the kernel[*], fix the bug with the
simple-but-ugly approach of loading the guest's FPU during
KVM_GET_MP_STATE.
[*] See commit f240652b6032b ("x86/mpx: Remove MPX APIs").
Fixes: f775b13eedee2 ("x86,kvm: move qemu/guest FPU switching out to vcpu_run") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a Spectre-v1/L1TF vulnerability in fixed_msr_to_seg_unit().
This function contains index computations based on the
(attacker-controlled) MSR number.
Fixes: de9aef5e1ad6 ("KVM: MTRR: introduce fixed_mtrr_segment table") Signed-off-by: Nick Finco <nifi@google.com> Signed-off-by: Marios Pomonis <pomonis@google.com> Reviewed-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a Spectre-v1/L1TF vulnerability in x86_decode_insn().
kvm_emulate_instruction() (an ancestor of x86_decode_insn()) is an exported
symbol, so KVM should treat it conservatively from a security perspective.
Fixes: 045a282ca415 ("KVM: emulator: implement fninit, fnstsw, fnstcw") Signed-off-by: Nick Finco <nifi@google.com> Signed-off-by: Marios Pomonis <pomonis@google.com> Reviewed-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a Spectre-v1/L1TF vulnerability in set_msr_mce() and
get_msr_mce().
Both functions contain index computations based on the
(attacker-controlled) MSR number.
Fixes: 890ca9aefa78 ("KVM: Add MCE support") Signed-off-by: Nick Finco <nifi@google.com> Signed-off-by: Marios Pomonis <pomonis@google.com> Reviewed-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a Spectre-v1/L1TF vulnerability in ioapic_read_indirect().
This function contains index computations based on the
(attacker-controlled) IOREGSEL register.
Fixes: a2c118bfab8b ("KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798)") Signed-off-by: Nick Finco <nifi@google.com> Signed-off-by: Marios Pomonis <pomonis@google.com> Reviewed-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a Spectre-v1/L1TF vulnerability in the get_gp_pmc() and
get_fixed_pmc() functions.
They both contain index computations based on the (attacker-controlled)
MSR number.
Fixes: 25462f7f5295 ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch") Signed-off-by: Nick Finco <nifi@google.com> Signed-off-by: Marios Pomonis <pomonis@google.com> Reviewed-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a Spectre-v1/L1TF vulnerability in ioapic_write_indirect().
This function contains index computations based on the
(attacker-controlled) IOREGSEL register.
This patch depends on patch
"KVM: x86: Protect ioapic_read_indirect() from Spectre-v1/L1TF attacks".
Fixes: 70f93dae32ac ("KVM: Use temporary variable to shorten lines.") Signed-off-by: Nick Finco <nifi@google.com> Signed-off-by: Marios Pomonis <pomonis@google.com> Reviewed-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes Spectre-v1/L1TF vulnerabilities in kvm_hv_msr_get_crash_data()
and kvm_hv_msr_set_crash_data().
These functions contain index computations that use the
(attacker-controlled) MSR number.
Fixes: e7d9513b60e8 ("kvm/x86: added hyper-v crash msrs into kvm hyperv context") Signed-off-by: Nick Finco <nifi@google.com> Signed-off-by: Marios Pomonis <pomonis@google.com> Reviewed-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / users / dwmw2 / linux.git / log