Peter Zijlstra [Mon, 4 Nov 2024 13:39:12 +0000 (14:39 +0100)]
perf/core: Fix perf_pmu_register() vs. perf_init_event()
There is a fairly obvious race between perf_init_event() doing
idr_find() and perf_pmu_register() doing idr_alloc() with an
incompletely initialized PMU pointer.
Avoid by doing idr_alloc() on a NULL pointer to register the id, and
swizzling the real struct pmu pointer at the end using idr_replace().
Also making sure to not set struct pmu members after publishing
the struct pmu, duh.
[ introduce idr_cmpxchg() in order to better handle the idr_replace()
error case -- if it were to return an unexpected pointer, it will
already have replaced the value and there is no going back. ]
Peter Zijlstra [Mon, 4 Nov 2024 13:39:11 +0000 (14:39 +0100)]
perf/core: Fix pmus_lock vs. pmus_srcu ordering
Commit a63fbed776c7 ("perf/tracing/cpuhotplug: Fix locking order")
placed pmus_lock inside pmus_srcu, this makes perf_pmu_unregister()
trip lockdep.
Move the locking about such that only pmu_idr and pmus (list) are
modified while holding pmus_lock. This avoids doing synchronize_srcu()
while holding pmus_lock and all is well again.
Linus Torvalds [Sat, 1 Mar 2025 16:59:29 +0000 (08:59 -0800)]
Merge tag 'ata-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Fix a regression where the enablement of the PHYs would be skipped
for device trees without any port child nodes (me)
- Revert ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives, as it stops
systems from entering lower package states. LPM works on newer
firmware versions. We will need a more refined quirk that only
targets the older firmware versions (me)
* tag 'ata-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
Revert "ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives"
ata: ahci: Make ahci_ignore_port() handle empty mask_port_map
Linus Torvalds [Sat, 1 Mar 2025 16:48:53 +0000 (08:48 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
It was reported that adding ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives
breaks entering lower package states for certain systems.
It turns out that Samsung SSD 870 QVO actually has working LPM when using
a recent SSD firmware version.
The author of commit cc77e2ce187d ("ata: libata-core: Add ATA_QUIRK_NOLPM
for Samsung SSD 870 QVO drives") reported himself that only older SSD
firmware versions have broken LPM:
https://lore.kernel.org/stable/93c10d38-718c-459d-84a5-4d87680b4da7@debian.org/
Unfortunately, he did not specify which older firmware version he was using
which had broken LPM.
Let's revert this quirk, which has FW version field specified as NULL
(which means that it applies for all Samsung SSD 870 QVO firmware versions)
for now. Once the author reports which older firmware version(s) that are
broken, we can create a more fine grained quirk, which populates the FW
version field accordingly.
Keith Busch [Thu, 27 Feb 2025 23:06:31 +0000 (15:06 -0800)]
kvm: retry nx_huge_page_recovery_thread creation
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side] Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keith Busch [Thu, 27 Feb 2025 23:06:30 +0000 (15:06 -0800)]
vhost: return task creation error instead of NULL
Lets callers distinguish why the vhost task creation failed. No one
currently cares why it failed, so no real runtime change from this
patch, but that will not be the case for long.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-2-kbusch@meta.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 1 Mar 2025 02:02:23 +0000 (18:02 -0800)]
Merge tag 'thermal-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the processing of DT thermal properties and the Power
Allocator thermal governor:
- Fix parsing cooling-maps in DT for trip points with more than one
cooling device (Rafael Wysocki)
- Fix granted_power computation in the Power Allocator thermal
governor and make it update total_weight on configuration changes
after the thermal zone has been registered (Yu-Che Cheng)"
* tag 'thermal-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_power_allocator: Update total_weight on bind and cdev updates
thermal/of: Fix cdev lookup in thermal_of_should_bind()
thermal: gov_power_allocator: Fix incorrect calculation in divvy_up_power()
Linus Torvalds [Sat, 1 Mar 2025 01:40:27 +0000 (17:40 -0800)]
Merge tag 'pm-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix the handling of processors that stop the TSC in deeper C-states in
the intel_idle driver (Thomas Gleixner)"
* tag 'pm-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: Handle older CPUs, which stop the TSC in deeper C states, correctly
Linus Torvalds [Sat, 1 Mar 2025 01:05:22 +0000 (17:05 -0800)]
Merge tag 'x86-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix conflicts between devicetree and ACPI SMP discovery & setup
- Fix a warm-boot lockup on AMD SC1100 SoC systems
- Fix a W=1 build warning related to x86 IRQ trace event setup
- Fix a kernel-doc warning
* tag 'x86-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix kernel-doc warning
x86/irq: Define trace events conditionally
x86/CPU: Fix warm boot hang regression on AMD SC1100 SoC systems
x86/of: Don't use DTB for SMP setup if ACPI is enabled
Linus Torvalds [Sat, 1 Mar 2025 01:00:16 +0000 (17:00 -0800)]
Merge tag 'sched-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Prevent cond_resched() based preemption when interrupts are disabled,
on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels"
* tag 'sched-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Prevent rescheduling when interrupts are disabled
Linus Torvalds [Sat, 1 Mar 2025 00:52:10 +0000 (16:52 -0800)]
Merge tag 'perf-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Miscellaneous perf events fixes and a minor HW enablement change:
- Fix missing RCU protection in perf_iterate_ctx()
- Fix pmu_ctx_list ordering bug
- Reject the zero page in uprobes
- Fix a family of bugs related to low frequency sampling
- Add Intel Arrow Lake U CPUs to the generic Arrow Lake RAPL support
table
- Fix a lockdep-assert false positive in uretprobes"
* tag 'perf-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Remove too strict lockdep_assert() condition in hprobe_expire()
perf/x86/rapl: Add support for Intel Arrow Lake U
perf/x86/intel: Use better start period for frequency mode
perf/core: Fix low freq setting via IOC_PERIOD
perf/x86: Fix low freqency setting issue
uprobes: Reject the shared zeropage in uprobe_write_opcode()
perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list
perf/core: Add RCU read lock protection to perf_iterate_ctx()
Linus Torvalds [Sat, 1 Mar 2025 00:45:36 +0000 (16:45 -0800)]
Merge tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix an objtool false positive, and objtool related build warnings that
happens on PIE-enabled architectures such as LoongArch"
* tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
objtool: Fix C jump table annotations for Clang
vmlinux.lds: Ensure that const vars with relocations are mapped R/O
Linus Torvalds [Fri, 28 Feb 2025 23:43:32 +0000 (15:43 -0800)]
Merge tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
Thomas Gleixner [Tue, 25 Feb 2025 22:37:08 +0000 (23:37 +0100)]
intel_idle: Handle older CPUs, which stop the TSC in deeper C states, correctly
The Intel idle driver is preferred over the ACPI processor idle driver,
but fails to implement the work around for Core2 generation CPUs, where
the TSC stops in C2 and deeper C-states. This causes stalls and boot
delays, when the clocksource watchdog does not catch the unstable TSC
before the CPU goes deep idle for the first time.
The ACPI driver marks the TSC unstable when it detects that the CPU
supports C2 or deeper and the CPU does not have a non-stop TSC.
Add the equivivalent work around to the Intel idle driver to cure that.
Fixes: 18734958e9bf ("intel_idle: Use ACPI _CST for processor models without C-state tables") Reported-by: Fab Stz <fabstz-it@yahoo.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Fab Stz <fabstz-it@yahoo.fr> Cc: All applicable <stable@vger.kernel.org> Closes: https://lore.kernel.org/all/10cf96aa-1276-4bd4-8966-c890377030c3@yahoo.fr Link: https://patch.msgid.link/87bjupfy7f.ffs@tglx Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* tag 'block-6.14-20250228' of git://git.kernel.dk/linux:
block: fix 'kmem_cache of name 'bio-108' already exists'
block: Remove zone write plugs when handling native zone append writes
block: make segment size limit workable for > 4K PAGE_SIZE
Linus Torvalds [Fri, 28 Feb 2025 16:47:21 +0000 (08:47 -0800)]
Merge tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another couple of EFI fixes for v6.14.
Only James's patch stands out, as it implements a workaround for odd
behavior in fwupd in user space, which creates EFI variables by
touching a file in efivarfs, clearing the immutable bit (which gets
set automatically for $reasons) and then opening it again for writing,
none of which is really necessary.
The fwupd author and LVFS maintainer is already rolling out a fix for
this on the fwupd side, and suggested that the workaround in this PR
could be backed out again during the next cycle.
(There is a semantic mismatch in efivarfs where some essential
variable attributes are stored in the first 4 bytes of the file, and
so zero length files cannot exist, as they cannot be written back to
the underlying variable store. So now, they are dropped once the last
reference is released.)
Summary:
- Fix CPER error record parsing bugs
- Fix a couple of efivarfs issues that were introduced in the merge
window
- Fix an issue in the early remapping code of the MOKvar table"
* tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/mokvar-table: Avoid repeated map/unmap of the same page
efi: Don't map the entire mokvar table to determine its size
efivarfs: allow creation of zero length files
efivarfs: Defer PM notifier registration until .fill_super
efi/cper: Fix cper_arm_ctx_info alignment
efi/cper: Fix cper_ia_proc_ctx alignment
Ming Lei [Fri, 28 Feb 2025 13:26:56 +0000 (21:26 +0800)]
block: fix 'kmem_cache of name 'bio-108' already exists'
Device mapper bioset often has big bio_slab size, which can be more than
1000, then 8byte can't hold the slab name any more, cause the kmem_cache
allocation warning of 'kmem_cache of name 'bio-108' already exists'.
Fix the warning by extending bio_slab->name to 12 bytes, but fix output
of /proc/slabinfo
Lu Baolu [Fri, 28 Feb 2025 10:27:26 +0000 (18:27 +0800)]
iommu/vt-d: Fix suspicious RCU usage
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Jerry Snitselaar [Fri, 28 Feb 2025 10:27:25 +0000 (18:27 +0800)]
iommu/vt-d: Remove device comparison in context_setup_pass_through_cb
Remove the device comparison check in context_setup_pass_through_cb.
pci_for_each_dma_alias already makes a decision on whether the
callback function should be called for a device. With the check
in place it will fail to create context entries for aliases as
it walks up to the root bus.
Fixes: 2031c469f816 ("iommu/vt-d: Add support for static identity domain") Closes: https://lore.kernel.org/linux-iommu/82499eb6-00b7-4f83-879a-e97b4144f576@linux.intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20250224180316.140123-1-jsnitsel@redhat.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
When updating the page table root field on the DTE, avoid overwriting any
bits that are already set. The earlier call to make_clear_dte() writes
default values that all DTEs must have set (currently DTE[V]), and those
must be preserved.
Currently this doesn't cause problems since the page table root update is
the first field that is set after make_clear_dte() is called, and
DTE_FLAG_V is set again later along with the permission bits (IR/IW).
Remove this redundant assignment too.
Linus Torvalds [Fri, 28 Feb 2025 05:17:58 +0000 (21:17 -0800)]
Merge tag 'drm-fixes-2025-02-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This week's fixes pull, amdgpu mostly, with some xe and a few misc
others, the fb defio fix is bit of a change, but it avoids some nasty
NULL pointer crashes due to defio assuming page backing in places it
didn't have pages.
i915:
- Fix encoder HW state readout for DP UHBR MST
xe:
- OA uapi fix (Umesh)
- Userptr related fixes
- Remove a duplicated register entry
- Scheduler related fix to prevent exec races when freeing it"
* tag 'drm-fixes-2025-02-28' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/fbdev-dma: Add shadow buffering for deferred I/O
drm/nouveau: Do not override forced connector status
drm/i915/dp_mst: Fix encoder HW state readout for UHBR MST
drm/xe: cancel pending job timer before freeing scheduler
drm/xe/regs: remove a duplicate definition for RING_CTL_SIZE(size)
drm/imagination: remove unnecessary header include path
drm/amdgpu: init return value in amdgpu_ttm_clear_buffer
drm/amd/display: Fix HPD after gpu reset
drm/amd/display: add a quirk to enable eDP0 on DP1
drm/amd/display: Disable PSR-SU on eDP panels
MAINTAINERS: Update AMDGPU DML maintainers info
drm/amd/display: restore edid reading from a given i2c adapter
mailmap: Add entry for Rodrigo Siqueira
MAINTAINERS: Change my role from Maintainer to Reviewer
drm/amdgpu/mes: keep enforce isolation up to date
drm/amdgpu/gfx: only call mes for enforce isolation if supported
MAINTAINERS: update amdgpu maintainers list
drm/amdgpu: disable BAR resize on Dell G5 SE
drm/amdkfd: Preserve cp_hqd_pq_control on update_mqd
amdgpu/pm/legacy: fix suspend/resume issues
...
Nikolay Kuratov [Thu, 6 Feb 2025 09:01:56 +0000 (12:01 +0300)]
ftrace: Avoid potential division by zero in function_stat_show()
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier.
Cc: stable@vger.kernel.org Cc: Wen Yang <wenyang@linux.alibaba.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250206090156.1561783-1-kniv@yandex-team.ru Fixes: e31f7939c1c27 ("ftrace: Avoid potential division by zero in function profiler") Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Heiko Carstens [Wed, 26 Feb 2025 14:27:03 +0000 (15:27 +0100)]
selftests/ftrace: Let fprobe test consider already enabled functions
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com Fixes: e85c5e9792b9 ("selftests/ftrace: Update fprobe test to check enabled_functions file") Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250227163944.1c37f85f@gandalf.local.home Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers") Reported-by: Tomas Glozar <tglozar@redhat.com> Tested-by: Tomas Glozar <tglozar@redhat.com> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Closes: https://lore.kernel.org/all/CAP4=nvTsxjckSBTz=Oe_UYh8keD9_sZC4i++4h72mJLic4_W4A@mail.gmail.com/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Dave Airlie [Fri, 28 Feb 2025 00:45:58 +0000 (10:45 +1000)]
Merge tag 'drm-xe-fixes-2025-02-27' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
uAPI:
- OA uapi fix (Umesh)
Driver:
- Userptr related fixes (Auld)
- Remove a duplicated register entry (Mingong)
- Scheduler related fix to prevent exec races when freeing it (Tejas)
Thomas Gleixner [Mon, 16 Dec 2024 13:20:56 +0000 (14:20 +0100)]
sched/core: Prevent rescheduling when interrupts are disabled
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: David Woodhouse <dwmw@amazon.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
Linus Torvalds [Thu, 27 Feb 2025 17:32:42 +0000 (09:32 -0800)]
Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
Ard Biesheuvel [Thu, 27 Feb 2025 13:30:22 +0000 (14:30 +0100)]
efi/mokvar-table: Avoid repeated map/unmap of the same page
Tweak the logic that traverses the MOKVAR UEFI configuration table to
only unmap the entry header and map the next one if they don't live in
the same physical page.
Peter Jones [Wed, 26 Feb 2025 20:18:39 +0000 (15:18 -0500)]
efi: Don't map the entire mokvar table to determine its size
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Cc: <stable@vger.kernel.org> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Linus Torvalds [Thu, 27 Feb 2025 16:41:19 +0000 (08:41 -0800)]
Merge tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
IEP driver supports both perout and pps signal generation
but perout feature is faulty with half-cooked support
due to some missing configuration. Remove perout
support from the driver and reject perout requests with
"not supported" error code.
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf270424218 ("net: selftest: add test for netdev netlink queue-get API") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
fixes for seg6 and rpl lwtunnels on input
As a follow up to commit 92191dd10730 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels"), we also need a conditional dst cache on
input for seg6_iptunnel and rpl_iptunnel to prevent dst ref loops (i.e.,
if the packet destination did not change, we may end up recording a
reference to the lwtunnel in its own cache, and the lwtunnel state will
never be freed). This series provides a fix to respectively prevent a
dst ref loop on input in seg6_iptunnel and rpl_iptunnel.
Nikita Zhandarovich [Mon, 24 Feb 2025 17:29:17 +0000 (20:29 +0300)]
usbnet: gl620a: fix endpoint checking in genelink_bind()
Syzbot reports [1] a warning in usb_submit_urb() triggered by
inconsistencies between expected and actually present endpoints
in gl620a driver. Since genelink_bind() does not properly
verify whether specified eps are in fact provided by the device,
in this case, an artificially manufactured one, one may get a
mismatch.
Fix the issue by resorting to a usbnet utility function
usbnet_get_endpoints(), usually reserved for this very problem.
Check for endpoints and return early before proceeding further if
any are missing.
James Bottomley [Wed, 26 Feb 2025 21:48:26 +0000 (16:48 -0500)]
efivarfs: allow creation of zero length files
Temporarily allow the creation of zero length files in efivarfs so the
'fwupd' user space firmware update tool can continue to operate. This
hack should be reverted as soon as the fwupd mechanisms for updating
firmware have been fixed.
fwupd has been coded to open a firmware file, close it, remove the
immutable bit and write to it. Since commit 908af31f4896 ("efivarfs:
fix error on write to new variable leaving remnants") this behaviour
results in the first close removing the file which causes the second
write to fail. To allow fwupd to keep working code up an indicator of
size 1 if a write fails and only remove the file on that condition (so
create at zero size is allowed).
Tested-by: Richard Hughes <richard@hughsie.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[ardb: replace LVFS with fwupd, as suggested by Richard] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Thomas Zimmermann [Wed, 11 Dec 2024 09:06:28 +0000 (10:06 +0100)]
drm/fbdev-dma: Add shadow buffering for deferred I/O
DMA areas are not necessarily backed by struct page, so we cannot
rely on it for deferred I/O. Allocate a shadow buffer for drivers
that require deferred I/O and use it as framebuffer memory.
Fixes driver errors about being "Unable to handle kernel NULL pointer
dereference at virtual address" or "Unable to handle kernel paging
request at virtual address".
The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial
allocation, which creates the DMA-backed buffer object, and a tail
that sets up the fbdev data structures. There is a tail function for
direct memory mappings and a tail function for deferred I/O with
the shadow buffer.
It is no longer possible to use deferred I/O without shadow buffer.
It can be re-added if there exists a reliably test for usable struct
page in the allocated DMA-backed buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
CLoses: https://lore.kernel.org/dri-devel/CAEXMXLR55DziAMbv_+2hmLeH-jP96pmit6nhs6siB22cpQFr9w@mail.gmail.com/ Tested-by: Nuno Gonçalves <nunojpg@gmail.com> Fixes: 5ab91447aa13 ("drm/tiny/ili9225: Use fbdev-dma") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> # v6.11+ Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211090643.74250-1-tzimmermann@suse.de
Fixes: 1274daede3ef ("net: mvpp2: cls: Add steering based on vlan Id and priority.") Signed-off-by: Harshal Chaudhari <hchaudhari@marvell.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250225042058.2643838-1-hchaudhari@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 689c398885cc ("af_unix: Defer sock_put() to clean up path in
unix_dgram_sendmsg().") defers sock_put() in the error handling path.
However, it fails to account for the condition 'msg->msg_namelen != 0',
resulting in a memory leak when the code jumps to the 'lookup' label.
Fix issue by calling sock_put() if 'msg->msg_namelen != 0' is met.
Fixes: 689c398885cc ("af_unix: Defer sock_put() to clean up path in unix_dgram_sendmsg().") Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Acked-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250225021457.1824-1-ahuang12@lenovo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Frederic Weisbecker [Sun, 23 Feb 2025 22:17:08 +0000 (23:17 +0100)]
net: Handle napi_schedule() calls from non-interrupt
napi_schedule() is expected to be called either:
* From an interrupt, where raised softirqs are handled on IRQ exit
* From a softirq disabled section, where raised softirqs are handled on
the next call to local_bh_enable().
* From a softirq handler, where raised softirqs are handled on the next
round in do_softirq(), or further deferred to a dedicated kthread.
Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.
Such "misuses" have been detected on several places thanks to messages
of the kind:
"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"
019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()") 330068589389 ("idpf: disable local BH when scheduling napi for marker packets") e3d5d70cb483 ("net: lan78xx: fix "softirq work is pending" error") e55c27ed9ccf ("mt76: mt7615: add missing bh-disable around rx napi schedule") c0182aa98570 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule") 970be1dff26d ("mt76: disable BH around napi_schedule() calls") 019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()") 30bfec4fec59 ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt") e63052a5dd3c ("mlx5e: add add missing BH locking around napi_schdule()") 83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule") bd4ce941c8d5 ("mlx4: Invoke softirqs after napi_reschedule") 8cf699ec849f ("mlx4: do not call napi_schedule() without care") ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule")
This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.
Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Jakub Kicinski <kuba@kernel.org> Reported-by: Francois Romieu <romieu@fr.zoreil.com> Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/ Cc: Breno Leitao <leitao@debian.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mohammad Heib [Tue, 25 Feb 2025 11:28:52 +0000 (13:28 +0200)]
net: Clear old fragment checksum value in napi_reuse_skb
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes: 76620aafd66f ("gro: New frags interface to avoid copying shinfo") Signed-off-by: Mohammad Heib <mheib@redhat.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250225112852.2507709-1-mheib@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Tue, 25 Feb 2025 21:10:23 +0000 (13:10 -0800)]
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
Breno Leitao reported the splat below. [0]
Commit 65161fb544aa ("net: Fix dev_net(dev) race in
unregister_netdevice_notifier_dev_net().") added the
DEBUG_NET_WARN_ON_ONCE(), assuming that the netdev is not
registered before register_netdevice_notifier_dev_net().
But the assumption was simply wrong.
Let's use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
Linus Torvalds [Thu, 27 Feb 2025 00:55:30 +0000 (16:55 -0800)]
Merge tag 'bcachefs-2025-02-26' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"A couple small ones, the main user visible changes/fixes are:
- Fix a bug where truncate would rarely fail and return 1
- Revert the directory i_size code: this turned out to have a number
of issues that weren't noticed because the fsck code wasn't
correctly reporting errors (ouch), and we're late enough in the
cycle that it can just wait until 6.15"
* tag 'bcachefs-2025-02-26' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix truncate sometimes failing and returning 1
bcachefs: Fix deadlock
bcachefs: Check for -BCH_ERR_open_buckets_empty in journal resize
bcachefs: Revert directory i_size
bcachefs: fix bch2_extent_ptr_eq()
bcachefs: Fix memmove when move keys down
bcachefs: print op->nonce on data update inconsistency
Linus Torvalds [Wed, 26 Feb 2025 23:13:10 +0000 (15:13 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small ufs fixes and a core change to clear the command private area on
every retry (which fixes a reported bug in virtio_scsi)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: bsg: Fix crash when arpmb command fails
scsi: ufs: core: Set default runtime/system PM levels before ufshcd_hba_init()
scsi: core: Clear driver private data when retrying request
scsi: ufs: core: Fix ufshcd_is_ufs_dev_busy() and ufshcd_eh_timed_out()
Linus Torvalds [Wed, 26 Feb 2025 22:13:11 +0000 (14:13 -0800)]
Merge tag 'sched_ext-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fix from Tejun Heo:
"pick_task_scx() has a workaround to avoid stalling when the fair
class's balance() says yes but pick_task() says no.
The workaround was incorrectly deciding to keep the prev taks running
if the task is on SCX even when the task is in a sleeping state, which
can lead to several confusing failure modes.
Fix it by testing the prev task is currently queued on SCX instead"
* tag 'sched_ext-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance()
Linus Torvalds [Wed, 26 Feb 2025 20:57:31 +0000 (12:57 -0800)]
Merge tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Stable Fixes:
- O_DIRECT writes should adjust file length
Other Bugfixes:
- Adjust delegated timestamps for O_DIRECT reads and writes
- Prevent looping due to rpc_signal_task() races
- Fix a deadlock when recovering state on a sillyrenamed file
- Properly handle -ETIMEDOUT errors from tlshd
- Suppress build warnings for unused procfs functions
- Fix memory leak of lsm_contexts"
* tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
lsm,nfs: fix memory leak of lsm_context
sunrpc: suppress warnings for unused procfs functions
SUNRPC: Handle -ETIMEDOUT return from tlshd
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
SUNRPC: Prevent looping due to rpc_signal_task() races
NFS: Adjust delegated timestamps for O_DIRECT reads and writes
NFS: O_DIRECT writes must check and adjust the file length
Linus Torvalds [Wed, 26 Feb 2025 19:55:44 +0000 (11:55 -0800)]
Merge tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
Linus Torvalds [Wed, 26 Feb 2025 19:47:19 +0000 (11:47 -0800)]
Merge tag 'integrity-v6.14-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"One bugfix and one spelling cleanup. The bug fix restores a
performance improvement"
* tag 'integrity-v6.14-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Reset IMA_NONACTION_RULE_FLAGS after post_setattr
integrity: fix typos and spelling errors
Adrien Vergé [Wed, 26 Feb 2025 13:55:15 +0000 (14:55 +0100)]
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
This fixes a regression introduced a few weeks ago in stable kernels
6.12.14 and 6.13.3. The internal microphone on ASUS Vivobook N705UD /
X705UD laptops is broken: the microphone appears in userspace (e.g.
Gnome settings) but no sound is detected.
I bisected it to commit 3b4309546b48 ("ALSA: hda: Fix headset detection
failure due to unstable sort").
I figured out the cause:
1. The initial pins enabled for the ALC256 driver are:
cfg->inputs == {
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
2. Since 2017 and commits c1732ede5e8 ("ALSA: hda/realtek - Fix headset
and mic on several ASUS laptops with ALC256") and 28e8af8a163 ("ALSA:
hda/realtek: Fix mic and headset jack sense on ASUS X705UD"), the
quirk ALC256_FIXUP_ASUS_MIC is also applied to ASUS X705UD / N705UD
laptops.
This added another internal microphone on pin 0x13:
cfg->inputs == {
{ pin=0x13, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
I don't know what this pin 0x13 corresponds to. To the best of my
knowledge, these laptops have only one internal microphone.
3. Before 2025 and commit 3b4309546b48 ("ALSA: hda: Fix headset
detection failure due to unstable sort"), the sort function would let
the microphone of pin 0x1a (the working one) *before* the microphone
of pin 0x13 (the phantom one).
4. After this commit 3b4309546b48, the fixed sort function puts the
working microphone (pin 0x1a) *after* the phantom one (pin 0x13). As
a result, no sound is detected anymore.
It looks like the quirk ALC256_FIXUP_ASUS_MIC is not needed anymore for
ASUS Vivobook X705UD / N705UD laptops. Without it, everything works
fine:
- the internal microphone is detected and records actual sound,
- plugging in a jack headset is detected and can record actual sound
with it,
- unplugging the jack headset makes the system go back to internal
microphone and can record actual sound.
Imre Deak [Mon, 24 Feb 2025 09:32:42 +0000 (11:32 +0200)]
drm/i915/dp_mst: Fix encoder HW state readout for UHBR MST
The encoder HW/SW state verification should use a SW state which stays
unchanged while the encoder/output is active. The intel_dp::is_mst flag
used during state computation to choose between the DP SST/MST modes can
change while the output is active, if the sink gets disconnected or the
MST topology is removed for another reason. A subsequent state
verification using intel_dp::is_mst leads then to a mismatch if the
output is disabled/re-enabled without recomputing its state.
Use the encoder's active MST link count instead, which will be always
non-zero for an active MST output and will be zero for SST.
Fixes: 35d2e4b75649 ("drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout") Fixes: 40d489fac0e8 ("drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()") Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250224093242.1859583-1-imre.deak@intel.com
(cherry picked from commit 0159e311772af9d6598aafe072c020687720f1d7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tejas Upadhyay [Tue, 25 Feb 2025 04:57:54 +0000 (10:27 +0530)]
drm/xe: cancel pending job timer before freeing scheduler
The async call to __guc_exec_queue_fini_async frees the scheduler
while a submission may time out and restart. To prevent this race
condition, the pending job timer should be canceled before freeing
the scheduler.
V3(MattB):
- Adjust position of cancel pending job
- Remove gitlab issue# from commit message
V2(MattB):
- Cancel pending jobs before scheduler finish
Mingcong Bai [Tue, 25 Feb 2025 07:31:01 +0000 (15:31 +0800)]
drm/xe/regs: remove a duplicate definition for RING_CTL_SIZE(size)
Commit b79e8fd954c4 ("drm/xe: Remove dependency on intel_engine_regs.h")
introduced an internal set of engine registers, however, as part of this
change, it has also introduced two duplicate `define' lines for
`RING_CTL_SIZE(size)'. This commit was introduced to the tree in v6.8-rc1.
While this is harmless as the definitions did not change, so no compiler
warning was observed.
Drop this line anyway for the sake of correctness.
Niklas Cassel [Tue, 25 Feb 2025 14:16:12 +0000 (15:16 +0100)]
ata: ahci: Make ahci_ignore_port() handle empty mask_port_map
Commit 8c87215dd3a2 ("ata: libahci_platform: support non-consecutive port
numbers") added a skip to ahci_platform_enable_phys() for ports that are
not in mask_port_map.
The code in ahci_platform_get_resources(), will currently set mask_port_map
for each child "port" node it finds in the device tree.
However, device trees that do not have any child "port" nodes will not have
mask_port_map set, and for non-device tree platforms mask_port_map will
only exist as a quirk for specific PCI device + vendor IDs, or as a kernel
module parameter, but will not be set by default.
Therefore, the common thing is that mask_port_map is only set if you do not
want to use all ports (as defined by Offset 0Ch: PI – Ports Implemented
register), but instead only want to use the ports in mask_port_map. If
mask_port_map is not set, all ports are available.
Thus, ahci_ignore_port() must be able to handle an empty mask_port_map.
Fixes: 8c87215dd3a2 ("ata: libahci_platform: support non-consecutive port numbers") Fixes: 2c202e6c4f4d ("ata: libahci_platform: Do not set mask_port_map when not needed") Fixes: c9b5be909e65 ("ahci: Introduce ahci_ignore_port() helper") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/linux-ide/10b31dd0-d0bb-4f76-9305-2195c3e17670@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Co-developed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250225141612.942170-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
Sean Christopherson [Mon, 24 Feb 2025 23:55:37 +0000 (15:55 -0800)]
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
Process pending events on nested VM-Exit if the vCPU has an injectable IRQ
or NMI, as the event may have become pending while L2 was active, i.e. may
not be tracked in the context of vmcs01. E.g. if L1 has passed its APIC
through to L2 and an IRQ arrives while L2 is active, then KVM needs to
request an IRQ window prior to running L1, otherwise delivery of the IRQ
will be delayed until KVM happens to process events for some other reason.
The missed failure is detected by vmx_apic_passthrough_tpr_threshold_test
in KVM-Unit-Tests, but has effectively been masked due to a flaw in KVM's
PIC emulation that causes KVM to make spurious KVM_REQ_EVENT requests (and
apparently no one ever ran the test with split IRQ chips).
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250224235542.2562848-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Mon, 24 Feb 2025 23:55:36 +0000 (15:55 -0800)]
KVM: x86: Free vCPUs before freeing VM state
Free vCPUs before freeing any VM state, as both SVM and VMX may access
VM state when "freeing" a vCPU that is currently "in" L2, i.e. that needs
to be kicked out of nested guest mode.
Commit 6fcee03df6a1 ("KVM: x86: avoid loading a vCPU after .vm_destroy was
called") partially fixed the issue, but for unknown reasons only moved the
MMU unloading before VM destruction. Complete the change, and free all
vCPU state prior to destroying VM state, as nVMX accesses even more state
than nSVM.
In addition to the AVIC, KVM can hit a use-after-free on MSR filters:
Inarguably, both nSVM and nVMX need to be fixed, but punt on those
cleanups for the moment. Conceptually, vCPUs should be freed before VM
state. Assets like the I/O APIC and PIC _must_ be allocated before vCPUs
are created, so it stands to reason that they must be freed _after_ vCPUs
are destroyed.
Reported-by: Aaron Lewis <aaronlewis@google.com> Closes: https://lore.kernel.org/all/20240703175618.2304869-2-aaronlewis@google.com Cc: Jim Mattson <jmattson@google.com> Cc: Yan Zhao <yan.y.zhao@intel.com> Cc: Rick P Edgecombe <rick.p.edgecombe@intel.com> Cc: Kai Huang <kai.huang@intel.com> Cc: Isaku Yamahata <isaku.yamahata@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250224235542.2562848-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wang Hai [Mon, 24 Feb 2025 09:00:47 +0000 (17:00 +0800)]
tcp: Defer ts_recent changes until req is owned
Recently a bug was discovered where the server had entered TCP_ESTABLISHED
state, but the upper layers were not notified.
The same 5-tuple packet may be processed by different CPUSs, so two
CPUs may receive different ack packets at the same time when the
state is TCP_NEW_SYN_RECV.
In that case, req->ts_recent in tcp_check_req may be changed concurrently,
which will probably cause the newsk's ts_recent to be incorrectly large.
So that tcp_validate_incoming will fail. At this point, newsk will not be
able to enter the TCP_ESTABLISHED.
The cpu2's skb or a newly received skb will call tcp_v4_do_rcv to get
the newsk into the TCP_ESTABLISHED state, but at this point it is no
longer possible to notify the upper layer application. A notification
mechanism could be added here, but the fix is more complex, so the
current fix is used.
In tcp_check_req, req->ts_recent is used to assign a value to
tcp_sk(child)->rx_opt.ts_recent, so removing the change in req->ts_recent
and changing tcp_sk(child)->rx_opt.ts_recent directly after owning the
req fixes this bug.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 26 Feb 2025 04:06:15 +0000 (20:06 -0800)]
Merge tag 'powerpc-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Madhavan Srinivasan:
- Fix for cross-reference in documentation and deprecation warning
Thanks to Andrew Donnellan and Bagas Sanjaya.
* tag 'powerpc-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
cxl: Fix cross-reference in documentation and add deprecation warning
Jakub Kicinski [Wed, 26 Feb 2025 03:11:01 +0000 (19:11 -0800)]
Merge branch 'net-enetc-fix-some-known-issues'
Wei Fang says:
====================
net: enetc: fix some known issues
There are some issues with the enetc driver, some of which are specific
to the LS1028A platform, and some of which were introduced recently when
i.MX95 ENETC support was added, so this patch set aims to clean up those
issues.
Wei Fang [Mon, 24 Feb 2025 11:12:51 +0000 (19:12 +0800)]
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
There is an off-by-one issue for the err_chained_bd path, it will free
one more tx_swbd than expected. But there is no such issue for the
err_map_data path. To fix this off-by-one issue and make the two error
handling consistent, the increment of 'i' and 'count' remain in sync
and enetc_unwind_tx_frame() is called for error handling.
Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO") Cc: stable@vger.kernel.org Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-9-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang [Mon, 24 Feb 2025 11:12:50 +0000 (19:12 +0800)]
net: enetc: remove the mm_lock from the ENETC v4 driver
Currently, the ENETC v4 driver has not added the MAC merge layer support
in the upstream, so the mm_lock is not initialized and used, so remove
the mm_lock from the driver.
Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-8-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang [Mon, 24 Feb 2025 11:12:49 +0000 (19:12 +0800)]
net: enetc: add missing enetc4_link_deinit()
The enetc4_link_init() is called when the PF driver probes to create
phylink and MDIO bus, but we forgot to call enetc4_link_deinit() to
free the phylink and MDIO bus when the driver was unbound. so add
missing enetc4_link_deinit() to enetc4_pf_netdev_destroy().
Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-7-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang [Mon, 24 Feb 2025 11:12:48 +0000 (19:12 +0800)]
net: enetc: update UDP checksum when updating originTimestamp field
There is an issue with one-step timestamp based on UDP/IP. The peer will
discard the sync packet because of the wrong UDP checksum. For ENETC v1,
the software needs to update the UDP checksum when updating the
originTimestamp field, so that the hardware can correctly update the UDP
checksum when updating the correction field. Otherwise, the UDP checksum
in the sync packet will be wrong.
Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-6-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang [Mon, 24 Feb 2025 11:12:47 +0000 (19:12 +0800)]
net: enetc: VFs do not support HWTSTAMP_TX_ONESTEP_SYNC
Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only
ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash
if VFs are used to test one-step timestamp, the crash log as follows.
Wei Fang [Mon, 24 Feb 2025 11:12:45 +0000 (19:12 +0800)]
net: enetc: keep track of correct Tx BD count in enetc_map_tx_tso_buffs()
When creating a TSO header, if the skb is VLAN tagged, the extended BD
will be used and the 'count' should be increased by 2 instead of 1.
Otherwise, when an error occurs, less tx_swbd will be freed than the
actual number.
Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO") Cc: stable@vger.kernel.org Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Piotr Kwapulinski [Mon, 24 Feb 2025 19:06:45 +0000 (11:06 -0800)]
ixgbe: fix media cage present detection for E610 device
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610
device") introduced incorrect checking of media cage presence for E610
device. Fix it.
Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/e7d73b32-f12a-49d1-8b60-1ef83359ec13@stanley.mountain/ Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This appears to be caused by the change in commit 5fda3f35349b ("net: make
netdev_lock() protect netdev->reg_state"), which added a netdev_lock() in
register_netdevice.
The iAVF driver calls register_netdevice() from iavf_finish_config(), as a
final stage of its state machine post-probe. It currently takes the RTNL
lock, then the netdev lock, and then the device critical lock. This pattern
is used throughout the driver. Thus there is a strong dependency that the
crit_lock should not be acquired before the net device lock. The change to
register_netdevice creates an ABBA lock order violation because the iAVF
driver is holding the crit_lock while calling register_netdevice, which
then takes the netdev_lock.
It seems likely that future refactors could result in netdev APIs which
hold the netdev_lock while calling into the driver. This means that we
should not re-order the locks so that netdev_lock is acquired after the
device private crit_lock.
Instead, notice that we already release the netdev_lock prior to calling
the register_netdevice. This flow only happens during the early driver
initialization as we transition through the __IAVF_STARTUP,
__IAVF_INIT_VERSION_CHECK, __IAVF_INIT_GET_RESOURCES, etc.
Analyzing the places where we take crit_lock in the driver there are two
sources:
a) several of the work queue tasks including adminq_task, watchdog_task,
reset_task, and the finish_config task.
b) various callbacks which ultimately stem back to .ndo operations or
ethtool operations.
The latter cannot be triggered until after the netdevice registration is
completed successfully.
The iAVF driver uses alloc_ordered_workqueue, which is an unbound workqueue
that has a max limit of 1, and thus guarantees that only a single work item
on the queue is executing at any given time, so none of the other work
threads could be executing due to the ordered workqueue guarantees.
The iavf_finish_config() function also does not do anything else after
register_netdevice, unless it fails. It seems unlikely that the driver
private crit_lock is protecting anything that register_netdevice() itself
touches.
Thus, to fix this ABBA lock violation, lets simply release the
adapter->crit_lock as well as netdev_lock prior to calling
register_netdevice(). We do still keep holding the RTNL lock as required by
the function. If we do fail to register the netdevice, then we re-acquire
the adapter critical lock to finish the transition back to
__IAVF_INIT_CONFIG_ADAPTER.
This ensures every call where both netdev_lock and the adapter->crit_lock
are acquired under the same ordering.
Fixes: afc664987ab3 ("eth: iavf: extend the netdev_lock usage") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marcin Szycik [Mon, 24 Feb 2025 19:06:42 +0000 (11:06 -0800)]
ice: Avoid setting default Rx VSI twice in switchdev setup
As part of switchdev environment setup, uplink VSI is configured as
default for both Tx and Rx. Default Rx VSI is also used by promiscuous
mode. If promisc mode is enabled and an attempt to enter switchdev mode
is made, the setup will fail because Rx VSI is already configured as
default (rule exists).
Reproducer:
devlink dev eswitch set $PF1_PCI mode switchdev
ip l s $PF1 up
ip l s $PF1 promisc on
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
In switchdev setup, use ice_set_dflt_vsi() instead of plain
ice_cfg_dflt_vsi(), which avoids repeating setting default VSI for Rx if
it's already configured.
Fixes: 50d62022f455 ("ice: default Tx rule instead of to queue") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marcin Szycik [Mon, 24 Feb 2025 19:06:41 +0000 (11:06 -0800)]
ice: Fix deinitializing VF in error path
If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees
all VFs without removing them from snapshot PF-VF mailbox list, leading
to list corruption.
Reproducer:
devlink dev eswitch set $PF1_PCI mode switchdev
ip l s $PF1 up
ip l s $PF1 promisc on
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
Trace (minimized):
list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330).
kernel BUG at lib/list_debug.c:29!
RIP: 0010:__list_add_valid_or_report+0xa6/0x100
ice_mbx_init_vf_info+0xa7/0x180 [ice]
ice_initialize_vf_entry+0x1fa/0x250 [ice]
ice_sriov_configure+0x8d7/0x1520 [ice]
? __percpu_ref_switch_mode+0x1b1/0x5d0
? __pfx_ice_sriov_configure+0x10/0x10 [ice]
Sometimes a KASAN report can be seen instead with a similar stack trace:
BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100
VFs are added to this list in ice_mbx_init_vf_info(), but only removed
in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is
also being called in other places where VFs are being removed (including
ice_free_vfs() itself).
Fixes: 8cd8a6b17d27 ("ice: move VF overflow message count into struct ice_mbx_vf_info") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Damien Le Moal [Fri, 14 Feb 2025 04:14:34 +0000 (13:14 +0900)]
block: Remove zone write plugs when handling native zone append writes
For devices that natively support zone append operations,
REQ_OP_ZONE_APPEND BIOs are not processed through zone write plugging
and are immediately issued to the zoned device. This means that there is
no write pointer offset tracking done for these operations and that a
zone write plug is not necessary.
However, when receiving a zone append BIO, we may already have a zone
write plug for the target zone if that zone was previously partially
written using regular write operations. In such case, since the write
pointer offset of the zone write plug is not incremented by the amount
of sectors appended to the zone, 2 issues arise:
1) we risk leaving the plug in the disk hash table if the zone is fully
written using zone append or regular write operations, because the
write pointer offset will never reach the "zone full" state.
2) Regular write operations that are issued after zone append operations
will always be failed by blk_zone_wplug_prepare_bio() as the write
pointer alignment check will fail, even if the user correctly
accounted for the zone append operations and issued the regular
writes with a correct sector.
Avoid these issues by immediately removing the zone write plug of zones
that are the target of zone append operations when blk_zone_plug_bio()
is called. The new function blk_zone_wplug_handle_native_zone_append()
implements this for devices that natively support zone append. The
removal of the zone write plug using disk_remove_zone_wplug() requires
aborting all plugged regular write using disk_zone_wplug_abort() as
otherwise the plugged write BIOs would never be executed (with the plug
removed, the completion path will never see again the zone write plug as
disk_get_zone_wplug() will return NULL). Rate-limited warnings are added
to blk_zone_wplug_handle_native_zone_append() and to
disk_zone_wplug_abort() to signal this.
Since blk_zone_wplug_handle_native_zone_append() is called in the hot
path for operations that will not be plugged, disk_get_zone_wplug() is
optimized under the assumption that a user issuing zone append
operations is not at the same time issuing regular writes and that there
are no hashed zone write plugs. The struct gendisk atomic counter
nr_zone_wplugs is added to check this, with this counter incremented in
disk_insert_zone_wplug() and decremented in disk_remove_zone_wplug().
To be consistent with this fix, we do not need to fill the zone write
plug hash table with zone write plugs for zones that are partially
written for a device that supports native zone append operations.
So modify blk_revalidate_seq_zone() to return early to avoid allocating
and inserting a zone write plug for partially written sequential zones
if the device natively supports zone append.
Reported-by: Jorgen Hansen <Jorgen.Hansen@wdc.com> Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Jorgen Hansen <Jorgen.Hansen@wdc.com> Link: https://lore.kernel.org/r/20250214041434.82564-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
mptcp: reset when MPTCP opts are dropped after join
Before this patch, if the checksum was not used, the subflow was only
reset if map_data_len was != 0. If there were no MPTCP options or an
invalid mapping, map_data_len was not set to the data len, and then the
subflow was not reset as it should have been, leaving the MPTCP
connection in a wrong fallback mode.
This map_data_len condition has been introduced to handle the reception
of the infinite mapping. Instead, a new dedicated mapping error could
have been returned and treated as a special case. However, the commit 31bf11de146c ("mptcp: introduce MAPPING_BAD_CSUM") has been introduced
by Paolo Abeni soon after, and backported later on to stable. It better
handle the csum case, and it means the exception for valid_csum_seen in
subflow_can_fallback(), plus this one for the infinite mapping in
subflow_check_data_avail(), are no longer needed.
In other words, the code can be simplified there: a fallback should only
be done if msk->allow_infinite_fallback is set. This boolean is set to
false once MPTCP-specific operations acting on the whole MPTCP
connection vs the initial path have been done, e.g. a second path has
been created, or an MPTCP re-injection -- yes, possible even with a
single subflow. The subflow_can_fallback() helper can then be dropped,
and replaced by this single condition.
This also makes the code clearer: a fallback should only be done if it
is possible to do so.
While at it, no need to set map_data_len to 0 in get_mapping_status()
for the infinite mapping case: it will be set to skb->len just after, at
the end of subflow_check_data_avail(), and not read in between.
Fixes: f8d4bcacff3b ("mptcp: infinite mapping receiving") Cc: stable@vger.kernel.org Reported-by: Chester A. Unal <chester.a.unal@xpedite-tech.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/544 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Tested-by: Chester A. Unal <chester.a.unal@xpedite-tech.com> Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-2-f550f636b435@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Indeed the PM can try to send a RM_ADDR over a msk without acquiring
first the msk socket lock.
The bugged code-path comes from an early optimization: when there
are no subflows, the PM should (usually) not send RM_ADDR
notifications.
The above statement is incorrect, as without locks another process
could concurrent create a new subflow and cause the RM_ADDR generation.
Additionally the supposed optimization is not very effective even
performance-wise, as most mptcp sockets should have at least one
subflow: the MPC one.
Address the issue removing the buggy code path, the existing "slow-path"
will handle correctly even the edge case.
Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reported-by: syzbot+cd3ce3d03a3393ae9700@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/546 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-1-f550f636b435@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stanislav Fomichev [Mon, 24 Feb 2025 17:44:01 +0000 (09:44 -0800)]
tcp: devmem: don't write truncated dmabuf CMSGs to userspace
Currently, we report -ETOOSMALL (err) only on the first iteration
(!sent). When we get put_cmsg error after a bunch of successful
put_cmsg calls, we don't signal the error at all. This might be
confusing on the userspace side which will see truncated CMSGs
but no MSG_CTRUNC signal.
Consider the following case:
- sizeof(struct cmsghdr) = 16
- sizeof(struct dmabuf_cmsg) = 24
- total cmsg size (CMSG_LEN) = 40 (16+24)
When calling recvmsg with msg_controllen=60, the userspace
will receive two(!) dmabuf_cmsg(s), the first one will
be a valid one and the second one will be silently truncated. There is no
easy way to discover the truncation besides doing something like
"cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))".
Introduce new put_devmem_cmsg wrapper that reports an error instead
of doing the truncation. Mina suggests that it's the intended way
this API should work.
Note that we might now report MSG_CTRUNC when the users (incorrectly)
call us with msg_control == NULL.
Fixes: 8f0b3cc9a4c1 ("tcp: RX path for devmem TCP") Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250224174401.3582695-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sascha Hauer [Mon, 24 Feb 2025 05:17:16 +0000 (06:17 +0100)]
net: ethernet: ti: am65-cpsw: select PAGE_POOL
am65-cpsw uses page_pool_dev_alloc_pages(), thus needs PAGE_POOL
selected to avoid linker errors. This is missing since the driver
started to use page_pool helpers in 8acacc40f733 ("net: ethernet:
ti: am65-cpsw: Add minimal XDP support")
projects / users / hch / misc.git / log