From: Andrea della Porta Date: Thu, 30 May 2024 10:12:01 +0000 (+0200) Subject: arm64: dts: broadcom: Add minimal support for Raspberry Pi 5 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=faa3381267d01a389b13038504079c85c0bc4392;p=linux.git arm64: dts: broadcom: Add minimal support for Raspberry Pi 5 The BCM2712 SoC family can be found on Raspberry Pi 5. Add minimal SoC and board (Rpi5 specific) dts file to be able to boot from SD card and use console on debug UART. Signed-off-by: Andrea della Porta Reviewed-by: Stefan Wahren Link: https://lore.kernel.org/r/874589f6c621036620cca944986e5be7238b4784.1717061147.git.andrea.porta@suse.com Signed-off-by: Florian Fainelli --- diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 8b4591ddd27c..92565e9781ad 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -6,6 +6,7 @@ DTC_FLAGS := -@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ bcm2711-rpi-cm4-io.dtb \ + bcm2712-rpi-5-b.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts new file mode 100644 index 000000000000..2bdbb6780242 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include +#include "bcm2712.dtsi" + +/ { + compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; + model = "Raspberry Pi 5"; + + aliases { + serial10 = &uart10; + }; + + chosen: chosen { + stdout-path = "serial10:115200n8"; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0 0x28000000>; + }; + + sd_io_1v8_reg: sd-io-1v8-reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; + states = <1800000 1>, + <3300000 0>; + }; + + sd_vcc_reg: sd-vcc-reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector + * labeled "UART", i.e. the interface with the system console. + */ +&uart10 { + status = "okay"; +}; + +/* SDIO1 is used to drive the SD card */ +&sdio1 { + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi new file mode 100644 index 000000000000..bccb7318ce7e --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +#include + +/ { + compatible = "brcm,bcm2712"; + + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gicv2>; + + clocks { + /* The oscillator is the root of the clock tree. */ + clk_osc: clk-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "osc"; + clock-frequency = <54000000>; + }; + + clk_vpu: clk-vpu { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <750000000>; + clock-output-names = "vpu-clock"; + }; + + clk_uart: clk-uart { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <9216000>; + clock-output-names = "uart-clock"; + }; + + clk_emmc2: clk-emmc2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "emmc2-clock"; + }; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + + /* Source for L1 d/i cache-line-size, cache-sets, cache-size + * https://developer.arm.com/documentation/100798/0401/L1-memory-system/About-the-L1-memory-system?lang=en + * Source for L2 cache-line-size and cache-sets: + * https://developer.arm.com/documentation/100798/0401/L2-memory-system/About-the-L2-memory-system?lang=en + * and for cache-size: + * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712 + */ + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x000>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l0>; + + l2_cache_l0: l2-cache-l0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x100>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l1>; + + l2_cache_l1: l2-cache-l1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x200>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l2>; + + l2_cache_l2: l2-cache-l2 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x300>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l3>; + + l2_cache_l3: l2-cache-l3 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + }; + + /* Source for cache-line-size and cache-sets: + * https://developer.arm.com/documentation/100453/0401/L3-cache?lang=en + * Source for cache-size: + * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712 + */ + l3_cache: l3-cache { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; // 2MiB(size)/64(line-size)=32768ways/16-way set + cache-level = <3>; + cache-unified; + }; + }; + + psci { + method = "smc"; + compatible = "arm,psci-1.0", "arm,psci-0.2"; + }; + + rmem: reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + atf@0 { + reg = <0x0 0x0 0x0 0x80000>; + no-map; + }; + + cma: linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x4000000>; /* 64MB */ + reusable; + linux,cma-default; + alloc-ranges = <0x0 0x00000000 0x0 0x40000000>; + }; + }; + + soc: soc@107c000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x10 0x00000000 0x80000000>; + #address-cells = <1>; + #size-cells = <1>; + + sdio1: mmc@fff000 { + compatible = "brcm,bcm2712-sdhci", + "brcm,sdhci-brcmstb"; + reg = <0x00fff000 0x260>, + <0x00fff400 0x200>; + reg-names = "host", "cfg"; + interrupts = ; + clocks = <&clk_emmc2>; + clock-names = "sw_sdio"; + mmc-ddr-3_3v; + }; + + system_timer: timer@7c003000 { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7c003000 0x1000>; + interrupts = , + , + , + ; + clock-frequency = <1000000>; + }; + + mailbox: mailbox@7c013880 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7c013880 0x40>; + interrupts = ; + #mbox-cells = <0>; + }; + + local_intc: local-intc@7cd00000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x7cd00000 0x100>; + }; + + uart10: serial@7d001000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7d001000 0x200>; + interrupts = ; + clocks = <&clk_uart>, <&clk_vpu>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + interrupt-controller@7d517000 { + compatible = "brcm,bcm7271-l2-intc"; + reg = <0x7d517000 0x10>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gio_aon: gpio@7d517c00 { + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + reg = <0x7d517c00 0x40>; + gpio-controller; + #gpio-cells = <2>; + brcm,gpio-bank-widths = <17 6>; + /* The lack of 'interrupt-controller' property here is intended: + * don't use GIO_AON as an interrupt controller because it will + * clash with the firmware monitoring the PMIC interrupt via the VPU. + */ + }; + + gicv2: interrupt-controller@7fff9000 { + compatible = "arm,gic-400"; + reg = <0x7fff9000 0x1000>, + <0x7fffa000 0x2000>, + <0x7fffc000 0x2000>, + <0x7fffe000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + , + ; + }; +};