From: Esteban Blanc Date: Fri, 8 Dec 2023 11:49:14 +0000 (+0530) Subject: arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=f4eb94b898f5b708d024a70fd544cdd76537bcf9;p=users%2Fjedix%2Flinux-maple.git arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs This patch adds support for TPS6594 PMIC family on wakup I2C0 bus. Theses devices provides regulators (bucks and LDOs), but also GPIOs, a RTC, a watchdog, an ESM (Error Signal Monitor) which monitors the SoC error output signal, and a PFSM (Pre-configurable Finite State Machine) which manages the operational modes of the PMIC. Signed-off-by: Esteban Blanc Signed-off-by: Jai Luthra Signed-off-by: Neha Malcom Francis Reviewed-by: Udit Kumar Link: https://lore.kernel.org/r/20231208114919.3429562-3-n-francis@ti.com Signed-off-by: Nishanth Menon --- diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index dcad372620b1d..da3237b23b63a 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -172,6 +172,15 @@ }; }; +&wkup_pmx1 { + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + /* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7) + >; + }; +}; + &wkup_pmx2 { wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < @@ -208,6 +217,190 @@ compatible = "atmel,24c256"; reg = <0x50>; }; + + tps659411: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck1234-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka1234: buck1234 { + regulator-name = "vdd_cpu_avs"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + bootph-pre-ram; + }; + + bucka5: buck5 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd_mcuwk_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcu_gpioret_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659414: pmic@4c { + compatible = "ti,tps6594-q1"; + reg = <0x4c>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1-supply = <&vsys_3v3>; + buck2-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + buckb1: buck1 { + regulator-name = "vdd_io_1v8_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buckb2: buck2 { + regulator-name = "vdd_fpd_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb3: buck3 { + regulator-name = "vdd_phy_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb4: buck4 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb5: buck5 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob1: ldo1 { + regulator-name = "vdd_wk_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob2: ldo2 { + regulator-name = "vdd_gpioret_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob3: ldo3 { + regulator-name = "vda_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob4: ldo4 { + regulator-name = "vda_pll_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + lp876411: pmic@58 { + compatible = "ti,lp8764-q1"; + reg = <0x58>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1234-supply = <&vsys_3v3>; + + regulators { + buckc1234: buck1234 { + regulator-name = "vdd_core_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &main_i2c0 {