From: Pascal PAILLET-LME Date: Tue, 19 Feb 2019 10:04:33 +0000 (+0000) Subject: dt-bindings: regulator: remove regulator pull-down support for stpmic1 X-Git-Tag: v5.1-rc1~182^2^2~46 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=f369788894a483f9e703b13c0841ee0069eed758;p=users%2Fhch%2Fblock.git dt-bindings: regulator: remove regulator pull-down support for stpmic1 Regulator high pull down are enabled by default so remove support in the driver. Signed-off-by: Pascal Paillet Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt index de27897d3f3a..bf9385b11da6 100644 --- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt @@ -23,8 +23,6 @@ Switches are fixed voltage regulators with only enable/disable capability. Optional properties: - st,mask-reset: mask reset for this regulator: the regulator configuration is maintained during pmic reset. -- regulator-pull-down: enable high pull down - if not specified light pull down is used - regulator-over-current-protection: if set, all regulators are switched off in case of over-current detection on this regulator,