From: Miaoqing Pan Date: Thu, 30 May 2019 01:49:20 +0000 (+0800) Subject: ath10k: fix PCIE device wake up failed X-Git-Tag: v4.14.135~216 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=f012971c01f58968e0604fe5558d6332b72f152f;p=users%2Fdwmw2%2Flinux.git ath10k: fix PCIE device wake up failed [ Upstream commit 011d4111c8c602ea829fa4917af1818eb0500a90 ] Observed PCIE device wake up failed after ~120 iterations of soft-reboot test. The error message is "ath10k_pci 0000:01:00.0: failed to wake up device : -110" The call trace as below: ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait -> ath10k_pci_is_awake Once trigger the device to wake up, we will continuously check the RTC state until it returns RTC_STATE_V_ON or timeout. But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON. Occasionally, we get 0x7 on the fist read, we thought as a failure case, but actually is the right value, also verified with the spec. So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed ~2000 iterations. Tested HW: QCA9984 Signed-off-by: Miaoqing Pan Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin --- diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c index a860691d635d5..e96534cd3d8b6 100644 --- a/drivers/net/wireless/ath/ath10k/hw.c +++ b/drivers/net/wireless/ath/ath10k/hw.c @@ -168,7 +168,7 @@ const struct ath10k_hw_values qca6174_values = { }; const struct ath10k_hw_values qca99x0_values = { - .rtc_state_val_on = 5, + .rtc_state_val_on = 7, .ce_count = 12, .msi_assign_ce_max = 12, .num_target_ce_config_wlan = 10,