From: Hari Nagalla <hnagalla@ti.com>
Date: Fri, 2 May 2025 22:03:25 +0000 (-0500)
Subject: arm64: dts: ti: k3-am64: Reserve timers used by MCU FW
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=e4b55d85024f806c9b364d498e0ebbc74d76d77d;p=users%2Fwilly%2Fxarray.git

arm64: dts: ti: k3-am64: Reserve timers used by MCU FW

AM64x device has 4 R5F cores in the main domain. TI MCU firmware uses
main domain timers as tick timers in these firmwares. Hence keep them
as reserved in the Linux device tree.

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-12-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 5c6197ba842e..e01866372293 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -795,6 +795,26 @@
 	status = "okay";
 };
 
+/* main_timer8 is used by r5f0-0 */
+&main_timer8 {
+	status = "reserved";
+};
+
+/* main_timer9 is used by r5f0-1 */
+&main_timer9 {
+	status = "reserved";
+};
+
+/* main_timer10 is used by r5f1-0 */
+&main_timer10 {
+	status = "reserved";
+};
+
+/* main_timer11 is used by r5f1-1 */
+&main_timer11 {
+	status = "reserved";
+};
+
 &serdes_ln_ctrl {
 	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 33e421ec18ab..1deaa0be0085 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -710,6 +710,26 @@
 	status = "okay";
 };
 
+/* main_timer8 is used by r5f0-0 */
+&main_timer8 {
+	status = "reserved";
+};
+
+/* main_timer9 is used by r5f0-1 */
+&main_timer9 {
+	status = "reserved";
+};
+
+/* main_timer10 is used by r5f1-0 */
+&main_timer10 {
+	status = "reserved";
+};
+
+/* main_timer11 is used by r5f1-1 */
+&main_timer11 {
+	status = "reserved";
+};
+
 &ecap0 {
 	status = "okay";
 	/* PWM is available on Pin 1 of header J3 */