From: Sven Schwermer Date: Fri, 4 Apr 2025 18:40:36 +0000 (+0200) Subject: leds: multicolor: Fix intensity setting while SW blinking X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=e35ca991a777ef513040cbb36bc8245a031a2633;p=users%2Fdwmw2%2Flinux.git leds: multicolor: Fix intensity setting while SW blinking When writing to the multi_intensity file, don't unconditionally call led_set_brightness. By only doing this if blinking is inactive we prevent blinking from stopping if the blinking is in its off phase while the file is written. Instead, if blinking is active, the changed intensity values are applied upon the next blink. This is consistent with changing the brightness on monochrome LEDs with active blinking. Suggested-by: Jacek Anaszewski Acked-by: Jacek Anaszewski Acked-by: Pavel Machek Reviewed-by: Tobias Deiminger Tested-by: Sven Schuchmann Signed-off-by: Sven Schwermer Link: https://lore.kernel.org/r/20250404184043.227116-1-sven@svenschwermer.de Signed-off-by: Lee Jones --- diff --git a/drivers/leds/led-class-multicolor.c b/drivers/leds/led-class-multicolor.c index b2a87c9948165..fd66d2bdeace8 100644 --- a/drivers/leds/led-class-multicolor.c +++ b/drivers/leds/led-class-multicolor.c @@ -59,7 +59,8 @@ static ssize_t multi_intensity_store(struct device *dev, for (i = 0; i < mcled_cdev->num_colors; i++) mcled_cdev->subled_info[i].intensity = intensity_value[i]; - led_set_brightness(led_cdev, led_cdev->brightness); + if (!test_bit(LED_BLINK_SW, &led_cdev->work_flags)) + led_set_brightness(led_cdev, led_cdev->brightness); ret = size; err_out: mutex_unlock(&led_cdev->led_access);