From: Harini T Date: Wed, 30 Jul 2025 14:21:10 +0000 (+0530) Subject: rtc: zynqmp: Restore alarm functionality after kexec transition X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=e22f4d1321e0055065f274e20bf6d1dbf4b500f5;p=users%2Fhch%2Fmisc.git rtc: zynqmp: Restore alarm functionality after kexec transition During kexec reboots, RTC alarms that are fired during the kernel transition experience delayed execution. The new kernel would eventually honor these alarms, but the interrupt handlers would only execute after the driver probe is completed rather than at the intended alarm time. This is because pending alarm interrupt status from the previous kernel is not properly cleared during driver initialization, causing timing discrepancies in alarm delivery. To ensure precise alarm timing across kexec transitions, enhance the probe function to: 1. Clear any pending alarm interrupt status from previous boot. 2. Detect existing valid alarms and preserve their state. 3. Re-enable alarm interrupts for future alarms. Signed-off-by: Harini T Link: https://lore.kernel.org/r/20250730142110.2354507-1-harini.t@amd.com Signed-off-by: Alexandre Belloni --- diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c index f39102b66eac..3baa2b481d9f 100644 --- a/drivers/rtc/rtc-zynqmp.c +++ b/drivers/rtc/rtc-zynqmp.c @@ -277,6 +277,10 @@ static irqreturn_t xlnx_rtc_interrupt(int irq, void *id) static int xlnx_rtc_probe(struct platform_device *pdev) { struct xlnx_rtc_dev *xrtcdev; + bool is_alarm_set = false; + u32 pending_alrm_irq; + u32 current_time; + u32 alarm_time; int ret; xrtcdev = devm_kzalloc(&pdev->dev, sizeof(*xrtcdev), GFP_KERNEL); @@ -296,6 +300,17 @@ static int xlnx_rtc_probe(struct platform_device *pdev) if (IS_ERR(xrtcdev->reg_base)) return PTR_ERR(xrtcdev->reg_base); + /* Clear any pending alarm interrupts from previous kernel/boot */ + pending_alrm_irq = readl(xrtcdev->reg_base + RTC_INT_STS) & RTC_INT_ALRM; + if (pending_alrm_irq) + writel(pending_alrm_irq, xrtcdev->reg_base + RTC_INT_STS); + + /* Check if a valid alarm is already set from previous kernel/boot */ + alarm_time = readl(xrtcdev->reg_base + RTC_ALRM); + current_time = readl(xrtcdev->reg_base + RTC_CUR_TM); + if (alarm_time > current_time && alarm_time != 0) + is_alarm_set = true; + xrtcdev->alarm_irq = platform_get_irq_byname(pdev, "alarm"); if (xrtcdev->alarm_irq < 0) return xrtcdev->alarm_irq; @@ -337,6 +352,10 @@ static int xlnx_rtc_probe(struct platform_device *pdev) xlnx_init_rtc(xrtcdev); + /* Re-enable alarm interrupt if a valid alarm was found */ + if (is_alarm_set) + writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN); + device_init_wakeup(&pdev->dev, true); return devm_rtc_register_device(xrtcdev->rtc);