From: Chen-Yu Tsai Date: Fri, 17 Jul 2020 16:00:48 +0000 (+0800) Subject: ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages X-Git-Tag: v5.4.59~240 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=e22730350d9edd40f125f473a3f20db46d41040f;p=users%2Fdwmw2%2Flinux.git ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages [ Upstream commit e4dae01bf08b754de79072441c357737220b873f ] The Bananapi M2+ uses a GPIO line to change the effective resistance of the CPU supply regulator's feedback resistor network. The voltages described in the device tree were given directly by the vendor. This turns out to be slightly off compared to the real values. The updated voltages are based on calculations of the feedback resistor network, and verified down to three decimal places with a multi-meter. Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200717160053.31191-4-wens@kernel.org Signed-off-by: Sasha Levin --- diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi index a628b5ee72b65..235994a4a2ebb 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -16,12 +16,12 @@ regulator-type = "voltage"; regulator-boot-on; regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; + regulator-min-microvolt = <1108475>; + regulator-max-microvolt = <1308475>; regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ gpios-states = <0x1>; - states = <1100000 0>, <1300000 1>; + states = <1108475 0>, <1308475 1>; }; };