From: Laurent Pinchart Date: Tue, 12 Aug 2025 21:46:02 +0000 (+0300) Subject: media: i2c: ov02a10: Use V4L2 legacy sensor clock helper X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=dc1dadf63d451bab761248f19ca7560ec5568836;p=users%2Fhch%2Fmisc.git media: i2c: ov02a10: Use V4L2 legacy sensor clock helper Several camera sensor drivers access the "clock-frequency" property directly to retrieve the external clock rate, or modify the clock rate of the external clock programmatically. Both behaviours are valid on a subset of ACPI platforms, but are considered deprecated on OF platforms, and do not support ACPI platforms that implement MIPI DisCo for Imaging. Implementing them manually in drivers is deprecated, as that can encourage copying deprecated behaviour for OF platforms in new drivers, and lead to differences in behaviour between drivers. Instead, drivers that need to preserve the deprecated OF behaviour should use the devm_v4l2_sensor_clk_get_legacy() helper. This driver supports OF platforms only. The "clocks" and "clock-frequency" properties were initially mandatory in the DT bindings. The driver retrieves the clock, retrieves the clock rate from the "clock-frequency" property, and sets the clock rate to the retrieved rate. If the rate does not match one of the expected rates, the driver fails probing. This is deprecated behaviour for OF. Switch to using the devm_v4l2_sensor_clk_get_legacy() helper. This preserves setting the clock rate on OF platforms. Should support for OF platforms that set the clock rate through clock-frequency be considered unneeded in the future, the driver will only need to switch to devm_v4l2_sensor_clk_get() without any other change. Signed-off-by: Laurent Pinchart Signed-off-by: Sakari Ailus Reviewed-by: Mehdi Djait Signed-off-by: Hans Verkuil --- diff --git a/drivers/media/i2c/ov02a10.c b/drivers/media/i2c/ov02a10.c index 6217164a7492..70d9d7c43f18 100644 --- a/drivers/media/i2c/ov02a10.c +++ b/drivers/media/i2c/ov02a10.c @@ -102,7 +102,6 @@ struct ov02a10_mode { struct ov02a10 { struct device *dev; - u32 eclk_freq; /* Indication of MIPI transmission speed select */ u32 mipi_clock_voltage; @@ -886,22 +885,11 @@ static int ov02a10_probe(struct i2c_client *client) ov02a10->fmt.code = MEDIA_BUS_FMT_SRGGB10_1X10; } - ov02a10->eclk = devm_v4l2_sensor_clk_get(dev, "eclk"); + ov02a10->eclk = devm_v4l2_sensor_clk_get_legacy(dev, "eclk", false, 0); if (IS_ERR(ov02a10->eclk)) return dev_err_probe(dev, PTR_ERR(ov02a10->eclk), "failed to get eclk\n"); - ret = device_property_read_u32(dev, "clock-frequency", - &ov02a10->eclk_freq); - if (ret < 0) - return dev_err_probe(dev, ret, - "failed to get eclk frequency\n"); - - ret = clk_set_rate(ov02a10->eclk, ov02a10->eclk_freq); - if (ret < 0) - return dev_err_probe(dev, ret, - "failed to set eclk frequency (24MHz)\n"); - if (clk_get_rate(ov02a10->eclk) != OV02A10_ECLK_FREQ) dev_warn(dev, "eclk mismatched, mode is based on 24MHz\n");