From: Ioana Ciornei Date: Tue, 25 Oct 2022 14:41:17 +0000 (+0300) Subject: arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers X-Git-Tag: v6.1-rc4~19^2~4^2 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=d5c921a53c80dfa942f6dff36253db5a50775a5f;p=users%2Fdwmw2%2Flinux.git arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers Up until now, the external MDIO controller frequency values relied either on the default ones out of reset or on those setup by u-boot. Let's just properly specify the MDC frequency in the DTS so that even without u-boot's intervention Linux can drive the MDIO bus. Fixes: 0420dde30a90 ("arm64: dts: ls208xa: add the external MDIO nodes") Signed-off-by: Ioana Ciornei Signed-off-by: Shawn Guo --- diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index f1b9cc8714dc0..348d9e3a91252 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -532,6 +532,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -541,6 +544,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };