From: Pascal Paillet Date: Fri, 10 Jan 2020 10:16:00 +0000 (+0100) Subject: thermal: stm32: Fix icifr register name X-Git-Tag: v5.6-rc1~149^2~5 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=d401652c1c92f164bc5590548aa3a90f4636af89;p=nvme.git thermal: stm32: Fix icifr register name Fix a mistake with the ICIFR register name. Signed-off-by: Pascal Paillet Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200110101605.24984-2-p.paillet@st.com --- diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c index cf9ddc52f30e..7835e109692e 100644 --- a/drivers/thermal/st/stm_thermal.c +++ b/drivers/thermal/st/stm_thermal.c @@ -30,7 +30,7 @@ #define DTS_DR_OFFSET 0x1C #define DTS_SR_OFFSET 0x20 #define DTS_ITENR_OFFSET 0x24 -#define DTS_CIFR_OFFSET 0x28 +#define DTS_ICIFR_OFFSET 0x28 /* DTS_CFGR1 register mask definitions */ #define HSREF_CLK_DIV_MASK GENMASK(30, 24) @@ -122,10 +122,10 @@ static irqreturn_t stm_thermal_alarm_irq_thread(int irq, void *sdata) value = readl_relaxed(sensor->base + DTS_SR_OFFSET); if ((value & LOW_THRESHOLD) == LOW_THRESHOLD) - writel_relaxed(LOW_THRESHOLD, sensor->base + DTS_CIFR_OFFSET); + writel_relaxed(LOW_THRESHOLD, sensor->base + DTS_ICIFR_OFFSET); if ((value & HIGH_THRESHOLD) == HIGH_THRESHOLD) - writel_relaxed(HIGH_THRESHOLD, sensor->base + DTS_CIFR_OFFSET); + writel_relaxed(HIGH_THRESHOLD, sensor->base + DTS_ICIFR_OFFSET); thermal_zone_device_update(sensor->th_dev, THERMAL_EVENT_UNSPECIFIED); @@ -347,7 +347,7 @@ static int stm_enable_irq(struct stm_thermal_sensor *sensor) */ /* Make sure LOW_THRESHOLD IT is clear before enabling */ - writel_relaxed(LOW_THRESHOLD, sensor->base + DTS_CIFR_OFFSET); + writel_relaxed(LOW_THRESHOLD, sensor->base + DTS_ICIFR_OFFSET); /* Enable IT generation for low threshold */ value = readl_relaxed(sensor->base + DTS_ITENR_OFFSET); @@ -356,7 +356,7 @@ static int stm_enable_irq(struct stm_thermal_sensor *sensor) /* Enable the low temperature threshold if needed */ if (sensor->low_temp_enabled) { /* Make sure HIGH_THRESHOLD IT is clear before enabling */ - writel_relaxed(HIGH_THRESHOLD, sensor->base + DTS_CIFR_OFFSET); + writel_relaxed(HIGH_THRESHOLD, sensor->base + DTS_ICIFR_OFFSET); /* Enable IT generation for high threshold */ value |= HIGH_THRESHOLD;