From: Luca Weiss Date: Wed, 9 Jul 2025 14:55:17 +0000 (+0200) Subject: phy: qualcomm: phy-qcom-eusb2-repeater: Add support for PMIV0104 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=ce872bce1140eec07ed624e537687244a5c01397;p=users%2Fhch%2Fmisc.git phy: qualcomm: phy-qcom-eusb2-repeater: Add support for PMIV0104 Add support for the eUSB2 repeater found on the PMIV0104. There is no default init table for this PMIC, just the board-specific tuning parameters are used on top of the default tuning values. Reviewed-by: Abel Vesa Reviewed-by: Neil Armstrong Signed-off-by: Luca Weiss Link: https://lore.kernel.org/r/20250709-sm7635-eusb-repeater-v2-4-b6eff075c097@fairphone.com Signed-off-by: Vinod Koul --- diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c index b2f8f1314e90..3629b926108a 100644 --- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c +++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c @@ -82,6 +82,14 @@ static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = { .num_vregs = ARRAY_SIZE(pm8550b_vreg_l), }; +static const struct eusb2_repeater_cfg pmiv0104_eusb2_cfg = { + /* No PMIC-specific init sequence, only board level tuning via DT */ + .init_tbl = (struct eusb2_repeater_init_tbl_reg[]) {}, + .init_tbl_num = 0, + .vreg_list = pm8550b_vreg_l, + .num_vregs = ARRAY_SIZE(pm8550b_vreg_l), +}; + static const struct eusb2_repeater_cfg smb2360_eusb2_cfg = { .init_tbl = smb2360_init_tbl, .init_tbl_num = ARRAY_SIZE(smb2360_init_tbl), @@ -262,6 +270,10 @@ static const struct of_device_id eusb2_repeater_of_match_table[] = { .compatible = "qcom,pm8550b-eusb2-repeater", .data = &pm8550b_eusb2_cfg, }, + { + .compatible = "qcom,pmiv0104-eusb2-repeater", + .data = &pmiv0104_eusb2_cfg, + }, { .compatible = "qcom,smb2360-eusb2-repeater", .data = &smb2360_eusb2_cfg,