From: Wey-Yi Guy <wey-yi.w.guy@intel.com> Date: Wed, 30 Nov 2011 08:14:53 +0000 (-0800) Subject: iwlwifi: remove reference to legacy devices X-Git-Tag: v3.3-rc1~182^2~178^2~125^2~10 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=c4db616623030e9a75a990a2db4d733b5112acb1;p=users%2Fjedix%2Flinux-maple.git iwlwifi: remove reference to legacy devices After driver split, no need to reference to legacy devices, remove comments Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> --- diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 6f6a647d34f6..be26145f1da4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -60,11 +60,10 @@ struct iwl_tx_queue; /* Default noise level to report when noise measurement is not available. * This may be because we're: - * 1) Not associated (4965, no beacon statistics being sent to driver) + * 1) Not associated no beacon statistics being sent to driver) * 2) Scanning (noise measurement does not apply to associated channel) - * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) * Use default noise value of -127 ... this is below the range of measurable - * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. + * Rx dBm for all agn devices, so it can indicate "unmeasurable" to user. * Also, -127 works better than 0 when averaging frames with/without * noise info (e.g. averaging might be done in app); measured dBm values are * always negative ... using a negative value as the default keeps all