From: Chris Packham Date: Thu, 25 May 2023 00:31:53 +0000 (+1200) Subject: mtd: rawnand: marvell: don't set the NAND frequency select X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=c4d28e30a8d0b979e4029465ab8f312ab6ce2644;p=users%2Fjedix%2Flinux-maple.git mtd: rawnand: marvell: don't set the NAND frequency select marvell_nfc_setup_interface() uses the frequency retrieved from the clock associated with the nand interface to determine the timings that will be used. By changing the NAND frequency select without reflecting this in the clock configuration this means that the timings calculated don't correctly meet the requirements of the NAND chip. This hasn't been an issue up to now because of a different bug that was stopping the timings being updated after they were initially set. Fixes: b25251414f6e ("mtd: rawnand: marvell: Stop implementing ->select_chip()") Signed-off-by: Chris Packham Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20230525003154.2303012-2-chris.packham@alliedtelesis.co.nz --- diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index f1fcf136ad03..30c15e4e1cc0 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -2900,10 +2900,6 @@ static int marvell_nfc_init(struct marvell_nfc *nfc) regmap_update_bits(sysctrl_base, GENCONF_CLK_GATING_CTRL, GENCONF_CLK_GATING_CTRL_ND_GATE, GENCONF_CLK_GATING_CTRL_ND_GATE); - - regmap_update_bits(sysctrl_base, GENCONF_ND_CLK_CTRL, - GENCONF_ND_CLK_CTRL_EN, - GENCONF_ND_CLK_CTRL_EN); } /* Configure the DMA if appropriate */