From: Bhavya Kapoor <b-kapoor@ti.com>
Date: Mon, 29 Jul 2024 06:34:10 +0000 (+0530)
Subject: arm64: dts: ti: k3-j721s2-som-p0: Update mux-controller node name
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=c36f60772e2aeca253924572a9f348ba27192bd0;p=linux.git

arm64: dts: ti: k3-j721s2-som-p0: Update mux-controller node name

There are 2 mux-controller nodes in J721S2 which are responsible for
transferring can signals to the can phy but same node names for both
the mux-controllers led to errors while setting up both mux-controllers
for can phys simultaneously.
Thus, update node names for these mux-controller.

Fixes: 98f3b667e1de ("arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240729063411.1570930-2-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index 82aacc01e8fe..36136db26a47 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -134,13 +134,13 @@
 		};
 	};
 
-	mux0: mux-controller {
+	mux0: mux-controller-0 {
 		compatible = "gpio-mux";
 		#mux-state-cells = <1>;
 		mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>;
 	};
 
-	mux1: mux-controller {
+	mux1: mux-controller-1 {
 		compatible = "gpio-mux";
 		#mux-state-cells = <1>;
 		mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;