From: Emanuele Ghidoli Date: Wed, 28 May 2025 11:07:37 +0000 (+0200) Subject: arm64: dts: ti: k3-am62-verdin: Enable pull-ups on I2C buses X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=bdf4252f736cc1d2a8e3e633c70fe6c728f0756e;p=users%2Fjedix%2Flinux-maple.git arm64: dts: ti: k3-am62-verdin: Enable pull-ups on I2C buses Enable internal bias pull-ups on the SoC-side I2C buses that do not have external pull resistors populated on the SoM. This ensures proper default line levels. Cc: stable@vger.kernel.org Fixes: 316b80246b16 ("arm64: dts: ti: add verdin am62") Signed-off-by: Emanuele Ghidoli Reviewed-by: Francesco Dolcini Link: https://lore.kernel.org/r/20250528110741.262336-1-ghidoliemanuele@gmail.com Signed-off-by: Vignesh Raghavendra --- diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi index 1ea8f64b1b3bd..bc2289d747745 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -507,16 +507,16 @@ /* Verdin I2C_2_DSI */ pinctrl_i2c2: main-i2c2-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x00b0, PIN_INPUT, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */ - AM62X_IOPAD(0x00b4, PIN_INPUT, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */ + AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */ + AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */ >; }; /* Verdin I2C_4_CSI */ pinctrl_i2c3: main-i2c3-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x01d0, PIN_INPUT, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */ - AM62X_IOPAD(0x01d4, PIN_INPUT, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */ + AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */ + AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */ >; }; @@ -786,8 +786,8 @@ /* Verdin I2C_3_HDMI */ pinctrl_mcu_i2c0: mcu-i2c0-default-pins { pinctrl-single,pins = < - AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */ - AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */ + AM62X_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */ + AM62X_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */ >; };