From: Mihai Sain Date: Tue, 11 Feb 2025 14:33:01 +0000 (+0200) Subject: ARM: dts: microchip: sama7d65: Add flexcom 10 node X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=afd0fa0834ab7def410d2f92cda9464000fdf1e1;p=users%2Fjedix%2Flinux-maple.git ARM: dts: microchip: sama7d65: Add flexcom 10 node Add flexcom 10 node and its i2c-controller subnode for usage on the SAMA7D65 Curiosity board. Signed-off-by: Mihai Sain Link: https://lore.kernel.org/r/20250211143302.4102-2-mihai.sain@microchip.com [claudiu.beznea: use compatible, reg, ranges order in flexcom node] Signed-off-by: Claudiu Beznea --- diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi index 854b30d15dcd4..ac6eb52e8c226 100644 --- a/arch/arm/boot/dts/microchip/sama7d65.dtsi +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -132,6 +132,27 @@ }; }; + flx10: flexcom@e2824000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2824000 0x200>; + ranges = <0x0 0xe2824000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c10: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = ; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + #address-cells = <1>; + #size-cells = <0>; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + gic: interrupt-controller@e8c11000 { compatible = "arm,cortex-a7-gic"; reg = <0xe8c11000 0x1000>,