From: Sava Jakovljev Date: Wed, 21 Aug 2024 02:16:57 +0000 (+0200) Subject: net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=a2f5c505b4378cd6fc7c4a44ff3665ccef2037db;p=users%2Fdwmw2%2Flinux.git net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F The current implementation incorrectly sets the mode bit of the PHY chip. Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the configuration nibble of a LED- it should be set independently of the index of the LED being configured. As a consequence, the RTL8211F LED control is actually operating in Mode A. Fix the error by or-ing final register value to write with a const-value of RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly. Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F") Signed-off-by: Sava Jakovljev Reviewed-by: Marek Vasut Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COM Signed-off-by: Paolo Abeni --- diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 87865918dab6d..25e5bfbb6f89b 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -555,7 +555,7 @@ static int rtl8211f_led_hw_control_set(struct phy_device *phydev, u8 index, unsigned long rules) { const u16 mask = RTL8211F_LEDCR_MASK << (RTL8211F_LEDCR_SHIFT * index); - u16 reg = RTL8211F_LEDCR_MODE; /* Mode B */ + u16 reg = 0; if (index >= RTL8211F_LED_COUNT) return -EINVAL; @@ -575,6 +575,7 @@ static int rtl8211f_led_hw_control_set(struct phy_device *phydev, u8 index, } reg <<= RTL8211F_LEDCR_SHIFT * index; + reg |= RTL8211F_LEDCR_MODE; /* Mode B */ return phy_modify_paged(phydev, 0xd04, RTL8211F_LEDCR, mask, reg); }