From: Dongcheng Yan Date: Fri, 25 Apr 2025 10:43:30 +0000 (+0800) Subject: platform/x86: int3472: add hpd pin support X-Git-Tag: v6.17-rc4~25^2~1 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=a032fe30cf09b6723ab61a05aee057311b00f9e1;p=users%2Fgriffoul%2Flinux.git platform/x86: int3472: add hpd pin support Typically HDMI to MIPI CSI-2 bridges have a pin to signal image data is being received. On the host side this is wired to a GPIO for polling or interrupts. This includes the Lontium HDMI to MIPI CSI-2 bridges lt6911uxe and lt6911uxc. The GPIO "hpd" is used already by other HDMI to CSI-2 bridges, use it here as well. Signed-off-by: Dongcheng Yan Reviewed-by: Sakari Ailus Acked-by: Ilpo Järvinen Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Fixes: 20244cbafbd6 ("media: i2c: change lt6911uxe irq_gpio name to "hpd"") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c index 4c0aed6e626f..bdfb8a800c54 100644 --- a/drivers/platform/x86/intel/int3472/discrete.c +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -193,6 +193,10 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 *con_id = "privacy-led"; *gpio_flags = GPIO_ACTIVE_HIGH; break; + case INT3472_GPIO_TYPE_HOTPLUG_DETECT: + *con_id = "hpd"; + *gpio_flags = GPIO_ACTIVE_HIGH; + break; case INT3472_GPIO_TYPE_POWER_ENABLE: *con_id = "avdd"; *gpio_flags = GPIO_ACTIVE_HIGH; @@ -223,6 +227,7 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 * 0x0b Power enable * 0x0c Clock enable * 0x0d Privacy LED + * 0x13 Hotplug detect * * There are some known platform specific quirks where that does not quite * hold up; for example where a pin with type 0x01 (Power down) is mapped to @@ -292,6 +297,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, switch (type) { case INT3472_GPIO_TYPE_RESET: case INT3472_GPIO_TYPE_POWERDOWN: + case INT3472_GPIO_TYPE_HOTPLUG_DETECT: ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, con_id, gpio_flags); if (ret) err_msg = "Failed to map GPIO pin to sensor\n"; diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h index 78276a11c48d..1571e9157fa5 100644 --- a/include/linux/platform_data/x86/int3472.h +++ b/include/linux/platform_data/x86/int3472.h @@ -27,6 +27,7 @@ #define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c #define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d #define INT3472_GPIO_TYPE_HANDSHAKE 0x12 +#define INT3472_GPIO_TYPE_HOTPLUG_DETECT 0x13 #define INT3472_PDEV_MAX_NAME_LEN 23 #define INT3472_MAX_SENSOR_GPIOS 3