From: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Date: Fri, 5 Apr 2024 16:07:17 +0000 (+0200)
Subject: arm64: dts: freescale: imx8mp-verdin: replace sleep-moci hog with regulator
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=9d071e1889a578162ced6a6c9062653f9bcb442c;p=linux.git

arm64: dts: freescale: imx8mp-verdin: replace sleep-moci hog with regulator

The Verdin family has a signal called sleep-moci which can be used to
turn off peripherals on the carrier board when the SoM goes into
suspend. So far we have hogged this signal, which means the peripherals
are always on and it is not possible to add peripherals that depend on
the sleep-moci to be on. With this change, we replace the hog with a
regulator so that peripherals can add their own regulators that use the
same gpio. Carrier boards that allow peripherals to be powered off in
suspend can disable this regulator and implement their own regulator to
control the sleep-moci.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index 8d954259085f..718004fe983f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -70,6 +70,11 @@
 	status = "okay";
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 /* Current measurement into module VCC */
 &hwmon {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
index e5400140e5c6..c2721e9f5797 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -93,6 +93,11 @@
 	status = "okay";
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &gpio_expander_21 {
 	status = "okay";
 	vcc-supply = <&reg_1p8v>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
index 3a8542266d85..a7b261ff3e4c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
@@ -100,6 +100,11 @@
 	status = "okay";
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &hwmon_temp {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index f033d4310305..aef4bef4bccd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -116,6 +116,22 @@
 		vin-supply = <&reg_vdd_3v3>;
 	};
 
+	/*
+	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+	 * peripherals on the carrier board powered.
+	 * If more granularity or power saving is required this can be disabled
+	 * in the carrier board device tree files.
+	 */
+	reg_force_sleep_moci: regulator-force-sleep-moci {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "CTRL_SLEEP_MOCI#";
+	};
+
 	reg_usb1_vbus: regulator-usb1-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -439,16 +455,6 @@
 			  "SODIMM_256",
 			  "SODIMM_48",
 			  "SODIMM_44";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 /* On-module I2C */