From: Surabhi Vishnoi Date: Wed, 17 Apr 2019 08:31:46 +0000 (+0530) Subject: ath10k: Do not send probe response template for mesh X-Git-Tag: v5.3-rc1~140^2~141^2~61^2~3 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=97354f2c432788e3163134df6bb144f4b6289d87;p=users%2Fhch%2Fmisc.git ath10k: Do not send probe response template for mesh Currently mac80211 do not support probe response template for mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host driver tries to configure probe response template for mesh, but it fails because the interface type is not NL80211_IFTYPE_AP but NL80211_IFTYPE_MESH_POINT. To avoid this failure, skip sending probe response template to firmware for mesh point. Tested HW: WCN3990/QCA6174/QCA9984 Signed-off-by: Surabhi Vishnoi Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 80760a20a049..98a7842e09b1 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1630,6 +1630,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif) if (arvif->vdev_type != WMI_VDEV_TYPE_AP) return 0; + /* For mesh, probe response and beacon share the same template */ + if (ieee80211_vif_is_mesh(vif)) + return 0; + prb = ieee80211_proberesp_get(hw, vif); if (!prb) { ath10k_warn(ar, "failed to get probe resp template from mac80211\n");