From: Erick Shepherd Date: Mon, 31 Mar 2025 22:13:37 +0000 (-0500) Subject: mmc: Add quirk to disable DDR50 tuning X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=9510b38dc0ba358c93cbf5ee7c28820afb85937b;p=users%2Fdwmw2%2Flinux.git mmc: Add quirk to disable DDR50 tuning Adds the MMC_QUIRK_NO_UHS_DDR50_TUNING quirk and updates mmc_execute_tuning() to return 0 if that quirk is set. This fixes an issue on certain Swissbit SD cards that do not support DDR50 tuning where tuning requests caused I/O errors to be thrown. Signed-off-by: Erick Shepherd Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20250331221337.1414534-1-erick.shepherd@ni.com Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h index 3205feb1e8ff6..9cbdd240c3a7d 100644 --- a/drivers/mmc/core/card.h +++ b/drivers/mmc/core/card.h @@ -89,6 +89,7 @@ struct mmc_fixup { #define CID_MANFID_MICRON 0x13 #define CID_MANFID_SAMSUNG 0x15 #define CID_MANFID_APACER 0x27 +#define CID_MANFID_SWISSBIT 0x5D #define CID_MANFID_KINGSTON 0x70 #define CID_MANFID_HYNIX 0x90 #define CID_MANFID_KINGSTON_SD 0x9F @@ -294,4 +295,9 @@ static inline int mmc_card_broken_sd_poweroff_notify(const struct mmc_card *c) return c->quirks & MMC_QUIRK_BROKEN_SD_POWEROFF_NOTIFY; } +static inline int mmc_card_no_uhs_ddr50_tuning(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_NO_UHS_DDR50_TUNING; +} + #endif diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h index 89b512905be14..7f893bafaa607 100644 --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h @@ -34,6 +34,16 @@ static const struct mmc_fixup __maybe_unused mmc_sd_fixups[] = { MMC_QUIRK_BROKEN_SD_CACHE | MMC_QUIRK_BROKEN_SD_POWEROFF_NOTIFY, EXT_CSD_REV_ANY), + /* + * Swissbit series S46-u cards throw I/O errors during tuning requests + * after the initial tuning request expectedly times out. This has + * only been observed on cards manufactured on 01/2019 that are using + * Bay Trail host controllers. + */ + _FIXUP_EXT("0016G", CID_MANFID_SWISSBIT, 0x5342, 2019, 1, + 0, -1ull, SDIO_ANY_ID, SDIO_ANY_ID, add_quirk_sd, + MMC_QUIRK_NO_UHS_DDR50_TUNING, EXT_CSD_REV_ANY), + END_FIXUP }; diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 8eba697d3d867..6847b3fe8887a 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -617,6 +617,29 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status) return 0; } +/* + * Determine if the card should tune or not. + */ +static bool mmc_sd_use_tuning(struct mmc_card *card) +{ + /* + * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and + * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. + */ + if (mmc_host_is_spi(card->host)) + return false; + + switch (card->host->ios.timing) { + case MMC_TIMING_UHS_SDR50: + case MMC_TIMING_UHS_SDR104: + return true; + case MMC_TIMING_UHS_DDR50: + return !mmc_card_no_uhs_ddr50_tuning(card); + } + + return false; +} + /* * UHS-I specific initialization procedure */ @@ -660,14 +683,7 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card) if (err) goto out; - /* - * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and - * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. - */ - if (!mmc_host_is_spi(card->host) && - (card->host->ios.timing == MMC_TIMING_UHS_SDR50 || - card->host->ios.timing == MMC_TIMING_UHS_DDR50 || - card->host->ios.timing == MMC_TIMING_UHS_SDR104)) { + if (mmc_sd_use_tuning(card)) { err = mmc_execute_tuning(card); /* diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 526fce5816575..ddcdf23d731c4 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -329,6 +329,7 @@ struct mmc_card { #define MMC_QUIRK_BROKEN_SD_CACHE (1<<15) /* Disable broken SD cache support */ #define MMC_QUIRK_BROKEN_CACHE_FLUSH (1<<16) /* Don't flush cache until the write has occurred */ #define MMC_QUIRK_BROKEN_SD_POWEROFF_NOTIFY (1<<17) /* Disable broken SD poweroff notify support */ +#define MMC_QUIRK_NO_UHS_DDR50_TUNING (1<<18) /* Disable DDR50 tuning */ bool written_flag; /* Indicates eMMC has been written since power on */ bool reenable_cmdq; /* Re-enable Command Queue */