From: Nishanth Menon <nm@ti.com>
Date: Fri, 13 Nov 2020 21:18:25 +0000 (-0600)
Subject: arm64: dts: ti: k3-am654-base-board: Fix up un-necessary status set to "okay" for USB
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=90e6c38848f8e86047e0e758c0725b155e2e349b;p=linux.git

arm64: dts: ti: k3-am654-base-board: Fix up un-necessary status set to "okay" for USB

The default state of a device tree node is "okay". There is no specific
use of explicitly adding status = "okay" in the board dts.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20201113211826.13087-5-nm@ti.com
---

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 0dec781982b1..c8c9aa98b561 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -356,14 +356,6 @@
 	disable-wp;
 };
 
-&dwc3_1 {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_pins_default>;