From: Hari Nagalla Date: Fri, 2 May 2025 22:03:22 +0000 (-0500) Subject: arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=8fb034b8402ead1028ed63394a177947b1450fcd;p=users%2Fjedix%2Flinux-maple.git arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors For each remote proc, reserve memory for IPC and bind the mailbox assignments. Two memory regions are reserved for each remote processor. The first region of 1MB of memory is used for Vring shared buffers and the second region is used as external memory to the remote processor for the resource table and for tracebuffer allocations. Signed-off-by: Devarsh Thakkar Signed-off-by: Hari Nagalla Signed-off-by: Judith Mendez Acked-by: Andrew Davis Link: https://lore.kernel.org/r/20250502220325.3230653-9-jm@ti.com Signed-off-by: Nishanth Menon --- diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index c6c8a9d17fb56..ee8337bfbbfd3 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -70,6 +70,18 @@ no-map; }; + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9da00000 0x00 0x100000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0xc00000>; + no-map; + }; + secure_tfa_ddr: tfa@9e780000 { reg = <0x00 0x9e780000 0x00 0x80000>; alignment = <0x1000>; @@ -82,11 +94,6 @@ no-map; }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { - compatible = "shared-dma-pool"; - reg = <0x00 0x9db00000 0x00 0xc00000>; - no-map; - }; }; leds { @@ -495,10 +502,17 @@ }; &mailbox0_cluster0 { + status = "okay"; + mbox_m4_0: mbox-m4-0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; + + mbox_r5_0: mbox-r5-0 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; }; &mcu_m4fss { @@ -508,6 +522,16 @@ status = "okay"; }; +&wkup_r5fss0 { + status = "okay"; +}; + +&wkup_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_r5_0>; + memory-region = <&wkup_r5fss0_core0_dma_memory_region>, + <&wkup_r5fss0_core0_memory_region>; +}; + &usbss0 { bootph-all; status = "okay";