From: Rafał Miłecki <rafal@milecki.pl>
Date: Sun, 23 Jul 2023 19:54:15 +0000 (+0200)
Subject: ARM: dts: BCM53573: Describe BCM53125 switch ports in the main DTS
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=8d6b61ecad2f1c939813c5c4517d53e04672dc48;p=linux.git

ARM: dts: BCM53573: Describe BCM53125 switch ports in the main DTS

BCM53125 always has 5 ports with GPHYs (for LAN/WAN ports) and 2 IMP
ports. It seems the best place to describe that in the main .dtsi.
Device specific bits can go to device .dts files. This will help
avoiding some code duplication.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230723195416.7831-2-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---

diff --git a/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
index 06b1a582809c..3ac6cac541ca 100644
--- a/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
@@ -111,34 +111,27 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "wan";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan1";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan3";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "lan4";
 		};
 
 		port@8 {
-			reg = <8>;
 			label = "cpu";
-			ethernet = <&gmac0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm53573.dtsi b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
index eed1a6147f0b..083304736fb3 100644
--- a/arch/arm/boot/dts/broadcom/bcm53573.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
@@ -192,10 +192,34 @@
 
 					status = "disabled";
 
-					/* ports are defined in board DTS */
 					ports {
 						#address-cells = <1>;
 						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+						};
+
+						port@1 {
+							reg = <1>;
+						};
+
+						port@2 {
+							reg = <2>;
+						};
+
+						port@3 {
+							reg = <3>;
+						};
+
+						port@4 {
+							reg = <4>;
+						};
+
+						port@8 {
+							reg = <8>;
+							ethernet = <&gmac0>;
+						};
 					};
 				};
 			};