From: Yu Jiaoliang Date: Tue, 10 Sep 2024 06:46:30 +0000 (+0800) Subject: regulator: Fix typos in the comment X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=886fee35251107e169128723215b1f779a668be5;p=users%2Fjedix%2Flinux-maple.git regulator: Fix typos in the comment Fixed some confusing typographical errors: comptabile->compatible, asignment->assignment, Verison->Version, meansurement->measurement, offets->offsets. Signed-off-by: Yu Jiaoliang Link: https://patch.msgid.link/20240910064631.3223441-1-yujiaoliang@vivo.com Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/da903x-regulator.c b/drivers/regulator/da903x-regulator.c index f79337079a456..2f85897183b3b 100644 --- a/drivers/regulator/da903x-regulator.c +++ b/drivers/regulator/da903x-regulator.c @@ -61,7 +61,7 @@ #define DA9034_MDTV2 (0x33) #define DA9034_MVRC (0x34) -/* DA9035 Registers. DA9034 Registers are comptabile to DA9035. */ +/* DA9035 Registers. DA9034 Registers are compatible to DA9035. */ #define DA9035_OVER3 (0x12) #define DA9035_VCC2 (0x1f) #define DA9035_3DTV1 (0x2c) diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index 82bf321ae06f0..e7dcfe40a2789 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -133,7 +133,7 @@ struct da9063_regulator_info { .suspend_vsel_reg = DA9063_REG_V##regl_name##_B, \ .mode = BFIELD(DA9063_REG_##regl_name##_CFG, DA9063_BUCK_MODE_MASK) -/* Defines asignment of regulators info table to chip model */ +/* Defines assignment of regulators info table to chip model */ struct da9063_dev_model { const struct da9063_regulator_info *regulator_info; unsigned int n_regulators; diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c index 17c9bf2043859..bd9447dac5967 100644 --- a/drivers/regulator/fan53555.c +++ b/drivers/regulator/fan53555.c @@ -46,7 +46,7 @@ /* VSEL bit definitions */ #define VSEL_BUCK_EN BIT(7) #define VSEL_MODE BIT(6) -/* Chip ID and Verison */ +/* Chip ID and Version */ #define DIE_ID 0x0F /* ID1 */ #define DIE_REV 0x0F /* ID2 */ /* Control bit definitions */ diff --git a/drivers/regulator/max5970-regulator.c b/drivers/regulator/max5970-regulator.c index 8bbcd983a74aa..4a568b1b01071 100644 --- a/drivers/regulator/max5970-regulator.c +++ b/drivers/regulator/max5970-regulator.c @@ -70,7 +70,7 @@ static int max5970_read(struct device *dev, enum hwmon_sensor_types type, * millivolts) and then divide it by the maximum value of the 10-bit ADC. */ *val = (*val * ddata->irng) >> 10; - /* Convert the voltage meansurement across shunt resistor to current */ + /* Convert the voltage measurement across shunt resistor to current */ *val = (*val * 1000) / ddata->shunt_micro_ohms; return 0; default: diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index 89657e8eea82e..d66a0f61637e1 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -245,7 +245,7 @@ enum spmi_saw3_registers { SAW3_VERSION = 0xFD0, }; -/* Used for indexing into ctrl_reg. These are offets from 0x40 */ +/* Used for indexing into ctrl_reg. These are offsets from 0x40 */ enum spmi_common_control_register_index { SPMI_COMMON_IDX_VOLTAGE_RANGE = 0, SPMI_COMMON_IDX_VOLTAGE_SET = 1,