From: Rob Herring (Arm) Date: Thu, 7 Aug 2025 21:44:13 +0000 (-0500) Subject: dt-bindings: rtc: Drop isil,isl12057.txt X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=84454c4e504b1fe86f77a898190d63b4193ca25d;p=users%2Fhch%2Fmisc.git dt-bindings: rtc: Drop isil,isl12057.txt The "isil,isl12057" compatible is already supported by rtc-ds1307.yaml, so remove the old text binding. Signed-off-by: Rob Herring (Arm) Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20250807214414.4172910-1-robh@kernel.org Signed-off-by: Alexandre Belloni --- diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt deleted file mode 100644 index ff7c43555199..000000000000 --- a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt +++ /dev/null @@ -1,74 +0,0 @@ -Intersil ISL12057 I2C RTC/Alarm chip - -ISL12057 is a trivial I2C device (it has simple device tree bindings, -consisting of a compatible field, an address and possibly an interrupt -line). - -Nonetheless, it also supports an option boolean property -("wakeup-source") to handle the specific use-case found -on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104 -and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip -(associated with the alarm supported by the driver) is not connected -to the SoC but to a PMIC. It allows the device to be powered up when -RTC alarm rings. In order to mark the device has a wakeup source and -get access to the 'wakealarm' sysfs entry, this specific property can -be set when the IRQ#2 pin of the chip is not connected to the SoC but -can wake up the device. - -Required properties supported by the device: - - - "compatible": must be "isil,isl12057" - - "reg": I2C bus address of the device - -Optional properties: - - - "wakeup-source": mark the chip as a wakeup source, independently of - the availability of an IRQ line connected to the SoC. - - -Example isl12057 node without IRQ#2 pin connected (no alarm support): - - isl12057: isl12057@68 { - compatible = "isil,isl12057"; - reg = <0x68>; - }; - - -Example isl12057 node with IRQ#2 pin connected to main SoC via MPP6 (note -that the pinctrl-related properties below are given for completeness and -may not be required or may be different depending on your system or -SoC, and the main function of the MPP used as IRQ line, i.e. -"interrupt-parent" and "interrupts" are usually sufficient): - - pinctrl { - ... - - rtc_alarm_pin: rtc_alarm_pin { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - ... - - }; - - ... - - isl12057: isl12057@68 { - compatible = "isil,isl12057"; - reg = <0x68>; - pinctrl-0 = <&rtc_alarm_pin>; - pinctrl-names = "default"; - interrupt-parent = <&gpio0>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - }; - - -Example isl12057 node without IRQ#2 pin connected to the SoC but to a -PMIC, allowing the device to be started based on configured alarm: - - isl12057: isl12057@68 { - compatible = "isil,isl12057"; - reg = <0x68>; - wakeup-source; - };