From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed, 10 Aug 2022 11:10:37 +0000 (+0300)
Subject: ARM: dts: ste: ux500: align SPI node name with dtschema
X-Git-Tag: v6.2-rc1~204^2~44^2~3
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=7b7c66ec81d80581939d3d774491acd761808f20;p=users%2Fgriffoul%2Flinux.git

ARM: dts: ste: ux500: align SPI node name with dtschema

The node names should be generic and DT schema expects certain pattern.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220810111037.280959-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---

diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
index d6940e0afa86..17dff403f77a 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
@@ -239,7 +239,7 @@
 		};
 	};
 
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index 5f41256d7f4b..9db490cc395b 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -325,7 +325,7 @@
 		};
 	};
 
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index 806da3fc33cd..79d43fc68cd8 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -269,7 +269,7 @@
 	/*
 	 * TODO: See if we can use the PL023 for this instead.
 	 */
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index ed5c79c3d04b..b34bd19ad815 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -263,7 +263,7 @@
 	 * this derivative is 3wire support, so it cannot be used to drive
 	 * this panel interface. We have to use GPIO bit-banging instead.
 	 */
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220 */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;