From: Clément Péron Date: Sun, 18 Oct 2020 17:24:09 +0000 (+0200) Subject: arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay X-Git-Tag: v5.4.80~114 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=79de663dcb110bd9f6d813eb008f7cd81f87eea3;p=users%2Fdwmw2%2Flinux.git arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay [ Upstream commit 97a38c1c213b162aa577299de698f39c18ba696b ] Before the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the software overwrite for RX/TX delays of the RTL8211e were not working properly and the Beelink GS1 had both RX/TX delay of RGMII interface set using pull-up on the TXDLY and RXDLY pins. Now that these delays are working properly they overwrite the HW config and set this to 'rgmii' meaning no delay on both RX/TX. This makes the ethernet of this board not working anymore. Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays in the device-tree to keep the correct configuration. Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board") Signed-off-by: Clément Péron Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20201018172409.1754775-1-peron.clem@gmail.com Signed-off-by: Sasha Levin --- diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 1d05d570142fa..0a04730960fcb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -83,7 +83,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&ext_rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_aldo2>; status = "okay";