From: Ryan Wanner Date: Wed, 10 Sep 2025 16:20:38 +0000 (-0700) Subject: ARM: at91: pm: Remove 2.5V regulator X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=747436750bc0ef73be32391bd5d0d7dcd185da7f;p=users%2Fhch%2Fmisc.git ARM: at91: pm: Remove 2.5V regulator Remove 2.5V regulator since enabling and disabling this regulator is no longer supported. Signed-off-by: Ryan Wanner Link: https://lore.kernel.org/r/a6785a40648b315a07152bca261a42bbf0f356af.1757519351.git.Ryan.Wanner@microchip.com Signed-off-by: Nicolas Ferre --- diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index aad53ec9e957..2e639f9ed648 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -87,29 +87,6 @@ tmp3 .req r6 .endm -/** - * Set state for 2.5V low power regulator - * @ena: 0 - disable regulator - * 1 - enable regulator - * - * Side effects: overwrites r7, r8, r9, r10 - */ - .macro at91_2_5V_reg_set_low_power ena -#ifdef CONFIG_SOC_SAMA7 - ldr r7, .sfrbu - mov r8, #\ena - ldr r9, [r7, #AT91_SFRBU_25LDOCR] - orr r9, r9, #AT91_SFRBU_25LDOCR_LP - cmp r8, #1 - beq lp_done_\ena - bic r9, r9, #AT91_SFRBU_25LDOCR_LP -lp_done_\ena: - ldr r10, =AT91_SFRBU_25LDOCR_LDOANAKEY - orr r9, r9, r10 - str r9, [r7, #AT91_SFRBU_25LDOCR] -#endif - .endm - .macro at91_backup_set_lpm reg #ifdef CONFIG_SOC_SAMA7 orr \reg, \reg, #0x200000 @@ -1023,9 +1000,6 @@ save_mck: at91_plla_disable - /* Enable low power mode for 2.5V regulator. */ - at91_2_5V_reg_set_low_power 1 - ldr tmp3, .pm_mode cmp tmp3, #AT91_PM_ULP1 beq ulp1_mode @@ -1038,9 +1012,6 @@ ulp1_mode: b ulp_exit ulp_exit: - /* Disable low power mode for 2.5V regulator. */ - at91_2_5V_reg_set_low_power 0 - ldr pmc, .pmc_base at91_plla_enable diff --git a/include/soc/at91/sama7-sfrbu.h b/include/soc/at91/sama7-sfrbu.h index 76b740810d34..8cee48d1ae2c 100644 --- a/include/soc/at91/sama7-sfrbu.h +++ b/include/soc/at91/sama7-sfrbu.h @@ -18,13 +18,6 @@ #define AT91_SFRBU_PSWBU_SOFTSWITCH (1 << 1) /* Power switch BU source selection */ #define AT91_SFRBU_PSWBU_CTRL (1 << 0) /* Power switch BU control */ -#define AT91_SFRBU_25LDOCR (0x0C) /* SFRBU 2.5V LDO Control Register */ -#define AT91_SFRBU_25LDOCR_LDOANAKEY (0x3B6E18 << 8) /* Specific value mandatory to allow writing of other register bits. */ -#define AT91_SFRBU_25LDOCR_STATE (1 << 3) /* LDOANA Switch On/Off Control */ -#define AT91_SFRBU_25LDOCR_LP (1 << 2) /* LDOANA Low-Power Mode Control */ -#define AT91_SFRBU_PD_VALUE_MSK (0x3) -#define AT91_SFRBU_25LDOCR_PD_VALUE(v) ((v) & AT91_SFRBU_PD_VALUE_MSK) /* LDOANA Pull-down value */ - #define AT91_FRBU_DDRPWR (0x10) /* SFRBU DDR Power Control Register */ #define AT91_FRBU_DDRPWR_STATE (1 << 0) /* DDR Power Mode State */