From: Gabor Juhos Date: Fri, 1 Aug 2025 07:58:35 +0000 (+0200) Subject: spi: spi-qpic-snand: use correct CW_PER_PAGE value for OOB write X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=6bc829220b33da8522572cc50fdf5067c51d3bf3;p=users%2Fjedix%2Flinux-maple.git spi: spi-qpic-snand: use correct CW_PER_PAGE value for OOB write The qcom_spi_program_oob() function uses only the last codeword to write the OOB data into the flash, but it sets the CW_PER_PAGE field in the CFG0 register as it would use all codewords. It seems that this confuses the hardware somehow, and any access to the flash fails with a timeout error after the function is called. The problem can be easily reproduced with the following commands: # dd if=/dev/zero bs=2176 count=1 > /tmp/test.bin 1+0 records in 1+0 records out # flash_erase /dev/mtd4 0 0 Erasing 128 Kibyte @ 0 -- 100 % complete # nandwrite -O /dev/mtd4 /tmp/test.bin Writing data to block 0 at offset 0x0 # nanddump -o /dev/mtd4 >/dev/null ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 131072, page size 2048, OOB size 128 Dumping data starting at 0x00000000 and ending at 0x00020000... [ 33.197605] qcom_snand 79b0000.spi: failure to read oob libmtd: error!: MEMREADOOB64 ioctl failed for mtd4, offset 0 (eraseblock 0) error 110 (Operation timed out) [ 35.277582] qcom_snand 79b0000.spi: failure in submitting cmd descriptor libmtd: error!: cannot read 2048 bytes from mtd4 (eraseblock 0, offset 2048) error 110 (Operation timed out) nanddump: error!: mtd_read Change the code to use the correct CW_PER_PAGE value to avoid this. Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface") Signed-off-by: Gabor Juhos Link: https://patch.msgid.link/20250801-qpic-snand-oob-cwpp-fix-v1-1-f5a41b86af2e@gmail.com Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-qpic-snand.c b/drivers/spi/spi-qpic-snand.c index 0cfa0d960fd3c..5216d60e01aab 100644 --- a/drivers/spi/spi-qpic-snand.c +++ b/drivers/spi/spi-qpic-snand.c @@ -1196,7 +1196,7 @@ static int qcom_spi_program_oob(struct qcom_nand_controller *snandc, u32 cfg0, cfg1, ecc_bch_cfg, ecc_buf_cfg; cfg0 = (ecc_cfg->cfg0 & ~CW_PER_PAGE_MASK) | - FIELD_PREP(CW_PER_PAGE_MASK, num_cw - 1); + FIELD_PREP(CW_PER_PAGE_MASK, 0); cfg1 = ecc_cfg->cfg1; ecc_bch_cfg = ecc_cfg->ecc_bch_cfg; ecc_buf_cfg = ecc_cfg->ecc_buf_cfg;