From: Francesco Dolcini Date: Thu, 6 Feb 2025 15:39:11 +0000 (+0100) Subject: arm64: dts: ti: k3-am62p: Enable AUDIO_REFCLKx X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=6a02c9aa222ce0fff47f526686690f84b7a97f4e;p=users%2Fjedix%2Flinux-maple.git arm64: dts: ti: k3-am62p: Enable AUDIO_REFCLKx On AM62P-based SoCs the AUDIO_REFCLKx clocks can be used as an input to external peripherals when configured through CTRL_MMR, so add the clock nodes. Link: http://downloads.ti.com/tisci/esd/latest/5_soc_doc/am62px/clocks.html Signed-off-by: Francesco Dolcini Link: https://lore.kernel.org/r/20250206153911.414702-1-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra --- diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi index 420c77c8e9e5e..4b47b07743305 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -42,6 +42,26 @@ ti,interrupt-ranges = <5 69 35>; }; +&main_conf { + audio_refclk0: clock-controller@82e0 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e0 0x4>; + clocks = <&k3_clks 157 0>; + assigned-clocks = <&k3_clks 157 0>; + assigned-clock-parents = <&k3_clks 157 16>; + #clock-cells = <0>; + }; + + audio_refclk1: clock-controller@82e4 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e4 0x4>; + clocks = <&k3_clks 157 18>; + assigned-clocks = <&k3_clks 157 18>; + assigned-clock-parents = <&k3_clks 157 34>; + #clock-cells = <0>; + }; +}; + &main_pmx0 { pinctrl-single,gpio-range = <&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,