From: Andre Przywara Date: Thu, 13 Jun 2024 23:31:04 +0000 (+0100) Subject: mfd: axp20x: AXP717: Fix missing IRQ status registers range X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=68f860426d500cfb697b505799244c7dfff604b1;p=linux.git mfd: axp20x: AXP717: Fix missing IRQ status registers range While we list the "IRQ status *and acknowledge*" registers as volatile in the MFD description, they are missing from the writable range array, so acknowledging any interrupts was met with an -EIO error. This error propagates up, leading to the whole AXP717 driver failing to probe, which is fatal to most systems using this PMIC, since most peripherals refer one of the PMIC voltage rails. This wasn't noticed on the initial submission, since the interrupt was completely missing at this point, but the DTs now merged describe the interrupt, creating the problem. Add the five registers that hold those bits to the writable array. This fixes the boot on the Anbernic systems using the AXP717 PMIC. Fixes: b5bfc8ab2484 ("mfd: axp20x: Add support for AXP717 PMIC") Reported-by: Chris Morgan Signed-off-by: Andre Przywara Reviewed-by: John Watts Link: https://lore.kernel.org/r/20240613233104.17529-1-andre.przywara@arm.com Signed-off-by: Lee Jones --- diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index f2c0f144c0fc..dacd3c96c9f5 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -210,6 +210,7 @@ static const struct regmap_access_table axp313a_volatile_table = { static const struct regmap_range axp717_writeable_ranges[] = { regmap_reg_range(AXP717_IRQ0_EN, AXP717_IRQ4_EN), + regmap_reg_range(AXP717_IRQ0_STATE, AXP717_IRQ4_STATE), regmap_reg_range(AXP717_DCDC_OUTPUT_CONTROL, AXP717_CPUSLDO_CONTROL), };