From: Biju Das Date: Thu, 16 Dec 2021 11:43:03 +0000 (+0000) Subject: arm64: dts: renesas: rzg2l-smarc: Move pinctrl definitions X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=65d2bc885b01642bbd0898b8af573783ab84f835;p=linux.git arm64: dts: renesas: rzg2l-smarc: Move pinctrl definitions RZ/G2L and RZ/G2LC SMARC EVK use the same carrier board, but the pin mappings between the RZ/G2L and the RZ/G2LC SMARC SoM are different. Therefore we need to update the carrier board pin definitions based on the corresponding SoM pin mapping. Move pinctrl definitions out of the RZ/G2L SMARC common file, so that we can reuse the common file to support RZ/G2LC SMARC EVK. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20211216114305.5842-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts index 247b0b3f1b58..886d38886d05 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r9a07g044l2.dtsi" #include "rzg2l-smarc-som.dtsi" +#include "rzg2l-smarc-pinfunction.dtsi" #include "rzg2l-smarc.dtsi" / { diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi new file mode 100644 index 000000000000..71d83e447670 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L SMARC pincontrol parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include +#include + +&pinctrl { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + can0_pins: can0 { + pinmux = , /* TX */ + ; /* RX */ + }; + + /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ + can0-stb { + gpio-hog; + gpios = ; + output-low; + line-name = "can0_stb"; + }; + + can1_pins: can1 { + pinmux = , /* TX */ + ; /* RX */ + }; + + /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ + can1-stb { + gpio-hog; + gpios = ; + output-low; + line-name = "can1_stb"; + }; + + i2c0_pins: i2c0 { + pins = "RIIC0_SDA", "RIIC0_SCL"; + input-enable; + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + i2c3_pins: i2c3 { + pinmux = , /* SDA */ + ; /* SCL */ + }; + + scif0_pins: scif0 { + pinmux = , /* TxD */ + ; /* RxD */ + }; + + scif2_pins: scif2 { + pinmux = , /* TxD */ + , /* RxD */ + , /* CTS# */ + ; /* RTS# */ + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + sd1_mux { + pinmux = ; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1_uhs { + sd1_data_uhs { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + sd1_ctrl_uhs { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + sd1_mux_uhs { + pinmux = ; /* SD1_CD */ + }; + }; + + sound_clk_pins: sound_clk { + pins = "AUDIO_CLK1", "AUDIO_CLK2"; + input-enable; + }; + + spi1_pins: spi1 { + pinmux = , /* CK */ + , /* MOSI */ + , /* MISO */ + ; /* SSL */ + }; + + ssi0_pins: ssi0 { + pinmux = , /* BCK */ + , /* RCK */ + , /* TXD */ + ; /* RXD */ + }; + + usb0_pins: usb0 { + pinmux = , /* VBUS */ + , /* OVC */ + ; /* OTG_ID */ + }; + + usb1_pins: usb1 { + pinmux = , /* VBUS */ + ; /* OVC */ + }; +}; + diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index 6f2a8bdfa225..46abb29718cc 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -162,133 +162,6 @@ status = "okay"; }; -&pinctrl { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - can0_pins: can0 { - pinmux = , /* TX */ - ; /* RX */ - }; - - /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ - can0-stb { - gpio-hog; - gpios = ; - output-low; - line-name = "can0_stb"; - }; - - can1_pins: can1 { - pinmux = , /* TX */ - ; /* RX */ - }; - - /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ - can1-stb { - gpio-hog; - gpios = ; - output-low; - line-name = "can1_stb"; - }; - - i2c0_pins: i2c0 { - pins = "RIIC0_SDA", "RIIC0_SCL"; - input-enable; - }; - - i2c1_pins: i2c1 { - pins = "RIIC1_SDA", "RIIC1_SCL"; - input-enable; - }; - - i2c3_pins: i2c3 { - pinmux = , /* SDA */ - ; /* SCL */ - }; - - scif0_pins: scif0 { - pinmux = , /* TxD */ - ; /* RxD */ - }; - - scif2_pins: scif2 { - pinmux = , /* TxD */ - , /* RxD */ - , /* CTS# */ - ; /* RTS# */ - }; - - sd1-pwr-en-hog { - gpio-hog; - gpios = ; - output-high; - line-name = "sd1_pwr_en"; - }; - - sdhi1_pins: sd1 { - sd1_data { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <3300>; - }; - - sd1_ctrl { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <3300>; - }; - - sd1_mux { - pinmux = ; /* SD1_CD */ - }; - }; - - sdhi1_pins_uhs: sd1_uhs { - sd1_data_uhs { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <1800>; - }; - - sd1_ctrl_uhs { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <1800>; - }; - - sd1_mux_uhs { - pinmux = ; /* SD1_CD */ - }; - }; - - sound_clk_pins: sound_clk { - pins = "AUDIO_CLK1", "AUDIO_CLK2"; - input-enable; - }; - - spi1_pins: spi1 { - pinmux = , /* CK */ - , /* MOSI */ - , /* MISO */ - ; /* SSL */ - }; - - ssi0_pins: ssi0 { - pinmux = , /* BCK */ - , /* RCK */ - , /* TXD */ - ; /* RXD */ - }; - - usb0_pins: usb0 { - pinmux = , /* VBUS */ - , /* OVC */ - ; /* OTG_ID */ - }; - - usb1_pins: usb1 { - pinmux = , /* VBUS */ - ; /* OVC */ - }; -}; - &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default";