From: Chanh Nguyen <chanh@os.amperecomputing.com>
Date: Tue, 6 Aug 2024 07:18:06 +0000 (+0000)
Subject: ARM: dts: aspeed: mtmitchell: Add LEDs
X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=6177ea49c6b8481e80a97302af0f63d3d16633d6;p=linux.git

ARM: dts: aspeed: mtmitchell: Add LEDs

Add LED nodes as the gpio-leds devices. They are led-bmc-ready,
led-sw-heartbeat, led-identify, led-fault, led-fan-fault, led-psu-fault

Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240806071806.1666550-6-chanh@os.amperecomputing.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
index 3111f23e56dc..0295f5adcfbc 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -113,6 +113,37 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		/*
+		 * Use gpio-leds to configure GPIOW5 (bmc-ready) pin to be reseted when
+		 * watchdog timeout.
+		 */
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan-fault {
+			gpios = <&gpio_expander1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-psu-fault {
+			gpios = <&gpio_expander1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	voltage_mon_reg: voltage-mon-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ltc2497_reg";