From: Julien Stephan Date: Wed, 30 Oct 2024 13:44:29 +0000 (+0100) Subject: docs: iio: ad7380: add adaq4370-4 and adaq4380-4 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=5e66d01f6083aa79d73efaa3b9ae65850a8929ca;p=users%2Fjedix%2Flinux-maple.git docs: iio: ad7380: add adaq4370-4 and adaq4380-4 Adding documentation for adaq4370-4 and adaq4380-4 supported devices. In particular, document the reference voltage mechanism and the gain parameter that are specific to adaq devices. Signed-off-by: Julien Stephan Reviewed-by: David Lechner Link: https://patch.msgid.link/20241030-ad7380-add-adaq4380-4-support-v4-5-864ff02babae@baylibre.com Signed-off-by: Jonathan Cameron --- diff --git a/Documentation/iio/ad7380.rst b/Documentation/iio/ad7380.rst index 6f70b49b9ef27..c46127700e14c 100644 --- a/Documentation/iio/ad7380.rst +++ b/Documentation/iio/ad7380.rst @@ -27,6 +27,8 @@ The following chips are supported by this driver: * `AD7386-4 `_ * `AD7387-4 `_ * `AD7388-4 `_ +* `ADAQ4370-4 `_ +* `ADAQ4380-4 `_ Supported features @@ -47,6 +49,12 @@ ad7380-4 ad7380-4 supports only an external reference voltage (2.5V to 3.3V). It must be declared in the device tree as ``refin-supply``. +ADAQ devices +~~~~~~~~~~~~ + +adaq4370-4 and adaq4380-4 don't have an external reference, but use a 3.3V +internal reference derived from one of its supplies (``refin-supply``) + All other devices from ad738x family ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -121,6 +129,14 @@ Example for AD7386/7/8 (2 channels parts): When enabling sequencer mode, the effective sampling rate is divided by two. +Gain (ADAQ devices only) +~~~~~~~~~~~~~~~~~~~~~~~~ + +ADAQ devices have a pin selectable gain in front of each ADC. The appropriate +gain is selectable from device tree using the ``adi,gain-milli`` property. +Refer to the typical connection diagrams section of the datasheet for pin +wiring. + Unimplemented features ----------------------