From: Icenowy Zheng Date: Wed, 12 Feb 2025 17:04:44 +0000 (+0800) Subject: nvme-pci: skip CMB blocks incompatible with PCI P2P DMA X-Git-Tag: nvme-6.14-2025-03-05~6 X-Git-Url: https://www.infradead.org/git/?a=commitdiff_plain;h=56cf7ef0d490b28fad8f8629fc135c5ab7c9f54e;p=nvme.git nvme-pci: skip CMB blocks incompatible with PCI P2P DMA The PCI P2PDMA code will register the CMB block to the memory hot-plugging subsystem, which have an alignment requirement. Memory blocks that do not satisfy this alignment requirement (usually 2MB) will lead to a WARNING from memory hotplugging. Verify the CMB block's address and size against the alignment and only try to send CMB blocks compatible with it to prevent this warning. Tested on Intel DC D4502 SSD, which has a 512K CMB block that is too small for memory hotplugging (thus PCI P2PDMA). Signed-off-by: Icenowy Zheng Signed-off-by: Keith Busch --- diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 218506e3dabe..640590b21728 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1982,6 +1982,18 @@ static void nvme_map_cmb(struct nvme_dev *dev) if (offset > bar_size) return; + /* + * Controllers may support a CMB size larger than their BAR, for + * example, due to being behind a bridge. Reduce the CMB to the + * reported size of the BAR + */ + size = min(size, bar_size - offset); + + if (!IS_ALIGNED(size, memremap_compat_align()) || + !IS_ALIGNED(pci_resource_start(pdev, bar), + memremap_compat_align())) + return; + /* * Tell the controller about the host side address mapping the CMB, * and enable CMB decoding for the NVMe 1.4+ scheme: @@ -1992,14 +2004,6 @@ static void nvme_map_cmb(struct nvme_dev *dev) dev->bar + NVME_REG_CMBMSC); } - /* - * Controllers may support a CMB size larger than their BAR, - * for example, due to being behind a bridge. Reduce the CMB to - * the reported size of the BAR - */ - if (size > bar_size - offset) - size = bar_size - offset; - if (pci_p2pdma_add_resource(pdev, bar, size, offset)) { dev_warn(dev->ctrl.device, "failed to register the CMB\n");